2011 Atlas Copco CS14 Diamond Core Drill ID: 1106332

2011 Atlas Copco CS14 Diamond Core Drill

• Make: Atlas Copco Epiroc

• Model: CS14

• Engine: Cummins QSB6.7 Diesel

• Hours: 8500 Approx.

• Included In Package
  • CS14 Drill
  • Hydraulic Controls
  • Heavy Duty Skid
  • Enclosure with fold out work platforms
  • Pump
  • Hoist
  • Wireline

• Condition: Good, Used

• Location: British Columbia, Canada

• General Specifications:

  • Depth capacity coring (wireline or conventional)
    B wireline 1540 m (5052 ft)
    N wireline 1200 m (4042 ft)
    H wireline 800 m (2695 ft)
    P wireline 475 m (1558 ft)
    Depth are based on vertical hole
    
    
  • Main hoist
    Single line capacity: Bare drum 80 kN (18,000 lb)
    Line speed: Bare drum 44 m/min (148 ft/min)
    Cable size: 35 m (118 ft) x 16 mm (10/16 in)
    
    
  • Wireline Capacity:
    • 1830 m (6000 ft) of 4.76 mm (3/16 in)
    • 975 m (3200 ft) of 6.35 mm (1/4 in)
  • Line pull: bare drum: 11.9 kN (2665 lb)
                  full drum:   3.0 kN (668 lb)
  • Line speed: bare drum 114 m/min (374 ft/min)
                     full drum   453 m/min (1486 ft/min)
    
    
  • Mast and feed system
    
    • Feed travel: 3.5 m (11.5 ft)
    • Feed speeds: fast and slow with variable control
    • Thrust: 59.6 kN (13,390 lb)
    • Pull: 138 kN (31,020 lb)
    • Drilling angle: 45 to 90 degrees
    • Rod pull length: 6.09 m (20 ft)
      
      
  • Power unit
    
    • Manufacture: Cummins
    • Model: QSB6,7 Tier III
    • Volume: 6.7 liter 6 cylinder
    • Power: 153 kW (208 HP)
    • RPM: 1800
    • Engine type: Diesel turbocharged/after cooled
    • Cooling: Water
      
      
  • Hydraulic system
    
    • Primary pump: 28 MPa – 242 l/min (4061 psi – 63.9 gal/min)
    • Secondary pump: 20 MPa – 122 l/min (2901 psi – 32.2 gal/min)
    • Auxiliary pump: 21.5 MPa – 47 l/min (3118 psi – 12.4 gal/min)
    • Hydraulic oil cooling: Air
      
      
  • Drillhead and spindle speeds
    
    • Power: hydraulic motor – variable speed/reversible
    • Final drive: 4 in chain driven in oil bath – 2,5 ratio
    • Spindle (inner diameter): 117 mm (4 5/8 in)
    • Spindle speeds:
                Ratio        Speed, RPM              Torque, Nm (ftlb)
      1st    6.63:1         117-196                  5113-3051 (3771-2250)
      2nd   3.17:1         245-410                  2445-1459 (1803-1076)
      3rd    1.72:1         451-756                  1326-792 (978-584)
      4th    1.00:1         776-1300                771-460 (569-340)
      Range selection: manual control from operator’s station
      Hinged head: swing away
      
      

       

• Chuck assembly

  • Type: hydraulic open, spring closed

     

  • Maximum inside diameter: 117 mm (4 5/8 in)
  • Holding capacity: 18,143 kg (40,000 lb)
    
    
• Rod Holder

   

  • Type: hydraulic open, gas spring closed
  • Maximum inside diameter: 210 mm (8.3 in)
  • Holding capacity: 13,000 kg (28,660 lb)
    
    
• Weight
  CS14 incl. Trido140 and Rod Holder: 7,000 kg (15,430 lb)
  
  
• Dimensions (L – W – H)
  • In transport position (top mast removed):
    6370 mm (21,45ft) 2200 mm (7,22ft) 2340 mm (7,88ft)
  • Transport on drill site (top mast folded):
    6370 mm (21,45ft) 2550 mm (8,59ft) 2340 mm (7,88ft)

View More Diamond Core Drills