Extrac-Tec HPC-10 Trommel Concentrator ID: 1631753

Extrac-Tec HPC-10 Trommel Concentrator

• Make: Extrac-Tec
• Model: HPC10
• Type: Trommel Concentrator
• Style: Spiral Concentrator
• Condition: Used Condition

• General Model Specifications:
  • Applications: Exploration, Bulk Sampling, Artisanal Mining, Recreational Use
  • Capacity: Safe/Conservative Capacity Calculations for the HPC-10 can be done as follows:
    • Maximum: Approx. 1-2 TPH of Fine Material (~ 1/3” minus or 8mm minus) Feed onto the Concentrator Belt
    • Feed to the Scrubbing/Screening Trommel can be up to 10 TPH, Provided the Fine Fraction Component is Kept At or Below the Maximum
      • For example: if 20% of your feed is fine material with gold particles above 150 mesh / 100 microns and remainder is rock/gravel/coarse fraction, then expected feed rate will be 7-10 tons/hour
  • Drive System:
    • Digital Variable Frequency Controller - Housed within a Waterproof Enclosure
    • 1.1kW (1.5HP) 3-Phase Drive Motor
    • Reduction Gearbox
      • Note: Single Phase Power Supplied to HPC-10 is Supplied Directly to the Variable Frequency Controller which Converts the Power to 3-Phase Power Required Motor. The Variable Frequency Controller Can be Adjusted to Set the Speed of the Concentrator Belt and Scrubbing / Screening Trommel
  • Electrical Supply Requirements:
    • Electrical Supply must be Single Phase 220V - 240V and 60Hz / 50Hz. HPC-10 is supplied with Electrical Supply cable
  • Water Supply Requirements:
    • Flow: Approx. 30-40 GPM (120-160 Liters/Minute)
    • Pressure Required: Approx. 45 PSI (310 kPa)
      • Note: Water Pump and Connection Hose are Not Supplied with the HPC-10
      • Water Recirculation is Possible Provided Settling Time is Allowed to Avoid Clogging Water Nozzles
  • Feed Material:
    • Maximum: 6in (150mm) Minus Material
    • Recommended: 2in (50mm) Minus
  • Trommel:
    • Scrubbing & Screening Trommel: 92in Long (2.34m) with 15in Diameter (0.4m Dia.) and 48in 2-Stage Scrubber (1.22m) 
    • Screen: 1/3" (8mm)
  • Feed Hopper:
    • Manually Adjustable, Gravity Fed
  • Dimensions:
    • Length: 154in (3.91m) with Hopper Folded Back and Tail Sluice Stowed - 200in (5.08m) with Hopper and Tail Sluice extended
    • Width: 71in (1.80m)
    • Height: 73in (1.85m) with Hopper Folded Back - 69in (1.75m) with Hopper Extended
    • Weight: 2,200 lbs. (1,000 kg)
  • Trailer:
    • Single Axle Trailer with Standard Tow-Hitch
  • Manning:
    • (1) Equipment Operator or Team of (2-6) for Manual Operation
      
      
• Portable Grizzly Hopper Feeder Can Also Be Included
  • Unit Needs Electric Motor and Replacement Belt
    
    
• Location: South West USA

View More Trommels