Quotes

Blackmer NP1 1/2 Centrifugal Lube Pump ID: 90975

1.5 inch inlet.
1.5 inch outlet.
Baldor 1.5 HP electric motor.
- 575 volt, 1725 rpm.
- 145T frame.
Pump driven through Falk inline gear reducer.
- 17.5-1 ratio.

View details Remove

38kW Doosan G50 Rental-Grade Portable Diesel Generator ID: 1420097

38kW Doosan G50 Rental-Grade Portable Diesel Generator

Make: Doosan
Model: G50WDO-3A-T4F
Year: 2019
Hours: 3,273.7 Hours
Condition: Used, Reported in Like New Condition
Rental Grade
Duty: Prime
Fuel: Diesel - No DEF
Portable/Stationary: Portable, Mounted on Trailer
- Trailer: Single Axle
Enclosure: Sound Attenuated Enclosure
Auto Start or Manual Start
Multi-Voltage Selector Switch: 3-Phase or Single Phase

Engine:
- Model: Doosan D24
- Power Output: 59.8HP (44.6kW)
- Number of Cylinders: 4
- Displacement: 2.392L

Generator:
- kVA/kW: 38kW (48kVA)
- Voltage: Multi Selector Switch
  - 480 Volts, 3-Phase
  - 208/240 Volts, 3-Phase
  - 240/120 Volts, Single Phase
- Current:
  - 408 Volts: 64 Amps
  - 208/240 Volts: 139 Amps
  - 240/120 Volts: 130 Amps
- Frequency: 60Hz
- Phase: 3-Phase or Single Phase

Overall Dimensions:
- Length: 130.5in (3,315mm)
- Width: 72.8in (1,850mm)
- Height: 78.4in (1,992mm)

Location: Southeast USA

View Spec Sheet Below

View More 26-50kW Diesel Generators

View details Remove

Cutler Hammer 3 Pole 50 Amp Push-in Breaker ID: 166322

120-240 VAC
3 Pole
Type: BR350
Push-in
Quantity 1

View More 50 Amp Breakers

Manufacturer:

CUTLER HAMMER

View details Remove

General Electric Cabinet For Induction Generator ID: 122493

General Electric Cabinet, Contol and Converter.
- For double fed induction generator in wind generation application.
- Manufactured in 2014.
  - Water cooled.
  - Connection: Grid.
  - Voltage (3 phase):
    - Grid: 690 VAC.
    - Gen stator: 690 VAC.
    - Gen rotor: 690 VAC.
  - Frequency:
    - Grid: 50/60 Hz.
    - Gen stator: 50/60 Hz.
    - Gen rotor: 50/60 Hz.
  - Current (A RMS):
    - Grid: 1720 @ 35°C / 1500 @ 45°C.
    - Gen stator: 1425 @ 35°C / 1425 @ 45°C.
    - Gen rotor: 640 @ 35°C / 640 @ 45°C.
  - Max symm. short circuit current :
    - 32 kA RMS, 690 VAC (Main XMFR connection).

Please contact us for more information.

Manufacturer:

GENERAL ELECTRIC

View details Remove

Boyles Bros. X-Ray Diamond Core Drill ID: 1415440

Boyles Bros. X-Ray Diamond Core Drill

Quantity: 2 Drills Available

Make: Boyles Bros.
Model: X-Ray
Type: Diamond Core Drill
Condition: Used Condition - Drill Heads are Complete and in Good Shape, as are the Frames
Drives: (3) Briggs-Stratton 9HP Engines
- One Engine is for Parts

General Specifications:
- Depth Rating:
  - RW: 250ft (76m)
  - EW: 150ft (46m)
  - AW: 100ft (30m)
  - BW: 75ft (23m)
- "X-RAY" Swivelheads:
  - Gear-Feed:
    - I.D. Feedscrew: 1-1/8in (28.6mm)
    - Feed Travel: 16in
    - Chuck RPM:
      - Standard 1:1 Bevel Gear: 720 to 1440 RPM
      - Low Speed 2:1 Bevel Gear: 360 to 720 RPM
    - Length: 32in (813mm)
    - Weight: 39 Lbs. (17.7kg)
    - Feed Gears:
      - Standard: 300 RPM and 550 RPM
      - Optional: 75, 200, 400, 675, 800 and 900 RPM
  - Hand-Feed:
    - I.D. Feedscrew: 1-1/8in (28.6mm)
    - Feed Travel: 10in (254mm)
    - Chuck RPM:
      - Standard 1:1 Bevel Gear: 720 to 1440 RPM
      - Low Speed 2: 1 Bevel Gear: 360 to 720 RPM
    - Length: 39in (990mm)
    - Weight: 68 Lbs. (31kg)
Location: Eastern Canada

View More Diamond Core Drills

View details Remove

Westinghouse 3 Pole 600 Amp MA Breaker ID: 164114

600 VAC
250 VDC
Cat #: MA3800F
Style #: 315C043G2S
Adjustable Magnetic Trip Settings

View More 600 Amp Breakers

Manufacturer:

WESTINGHOUSE

View details Remove

2017 Multipower Titan HD Tracked Diamond Core Drill ID: 1350917

2017 Multipower Titan HD Tracked Diamond Core Drill

Make: Multipower
Model: Titan HD
Year: 2017
Hours: 19,000
Condition: Used, Reported in Good Condition
Weight: 30,000 Lbs.
General Model Specifications:
- Depth Capacities: Based on Max Pullback & a 25% Safety Factor
  - N: 5,390ft (1,643m)
  - H: 3,675ft (1,148m)
  - P: 2,415ft (736m)
- Prime Mover:
  - Standard Unit: Cummins QSB6.7 - 6.7L, 6 Cylinder, Turbo-Charged Diesel Engine
  - Power: 260HP @2200 RPM
- Track Package:
  - Model: Cat 312L Steel Undercarriage
  - Design: Hyd. Driven Piston Motors, Spring Brake, 2-Speed
  - Speed (High/Low): 3.39mph / 2.27mph
  - Drawbar Pull (High/Low): 15,895 lbf / 24,655 lbf
  - Stabilizers: (4) Hydraulic Leveling Cylinders
  - Remote control: Radio Remote for Track Drive with Manual Control Valves
- Rotation Unit:
  - Standard Unit: XP Drill Head with Christensen Chuck
  - Maximum Opening: 4-5/8" (P Size)
  - RPM: 1400 RPM
  - Torque: 6,869 ft-lbs.
  - Chuck: 40,000 lbs. Capacity
  - Hydraulic Motor: Rexroth 160cc Variable Speed/Torque Piston Motor
  - Gear Ratios: 6.27:1, 3.12:1, 1.75:1, & 1:1
- Footclamp:
  - Standard Unit: Christensen Hydraulic Open/Spring Closed
  - Maximum Opening: 4-5/8” (P Size)
  - Capacity: 40,000 lbs.
- Secondary Footclamp:
  - Standard Unit: Cylinder & Jaw Style
  - Maximum Opening: 6” (P Casing)
  - Capacity: 40,000 lbs.
- Water Pump:
  - Standard Unit: W1122B-CD (435) Piston Pump
  - Capacity: 50 GPM @1000 PSI
- Mast and Feed:
  - Feed Stroke: 132”
  - Pullback: 37,700 lbs.
  - Pulldown: 16,490 lbs.
  - Drill Angle: 45° to 90°
  - Tower: 10ft or 20ft Rod Pull Capacity (Telescoping)
  - Mast Dump: 48”
- Winch:
  - Wireline Winch: Hydraulic Motor & Chain Drive
  - Capacity: 6,600ft of 1/4” Cable
  - Level Wind: Standard
- Hoist:
  - Hoisting Winch: Pullmaster M25
  - Hoisting Force: 25,000 lbs.
  - Capacity: 75ft of 18mm Cable
  - Hoist Motor: 2-Speed, Piston
- Hydraulic System:
  - Controls: Fully Hydraulic, No Electronics
  - Rod Handling: Synchronized Chuck & Footclamp with Manual Chuck/Clamp Control
  - System Pressure: 4,000 PSI
  - Filtration: 10 Micron
  - Components: Sauer Danfoss, Valvoil, Rexroth & Parker
  - Heat Exchanger: Air-Oil Heat Exchanger
  - Temp Rating: Rated for Operation in 50° Celsius Ambient
Location: Mexico

View More Diamond Core Drills

Watch YouTube Video Here: https://www.youtube.com/watch?v=2TDkeJ39Ksk

View details Remove

2011 Kubota 900 RTV ID: 462387

Model: RTV900
Year: 2011
Hours 280.3
4x4
3 Cylinder Diesel Engine
- RMX Turbo Kit for High Elevation
- 21.6 HP @ 3200 RPM
Real Tree AP Camouflage
Soucy ST 110 Tracks
- Dimensions: 14in. W x 44.7in. L x 26.3in. H Front
- Dimensions: 14in. W x 44.2in. L x 26.3in. H Rear
Includes: Spare Set of Baja Cross XD Tires + Rims
Hi/Low Range Transmission

Variable Hydrostatic
Neutral/Reverse

4WD System
- Front: Limited Slip Diff
- Rear: Foot Operated Diff Lock
Steering: Hydro Static Power
Brakes: Front/Rear Wet Disc
Towing Capacity: 1,300lbs/590 kgs
Cargo Bed: 57.7in. Wide x 40.5in. Long x 11.2in. Deep
Fuel Capacity: 30 Liters
Hydraulic Cargo Bed Lift
Winch
Canopy on Cab with Vinyl Doors
Heated
12 Volt ACC Outlet
Location: British Columbia, Canada

View more Recreational

View details Remove

10' X 8' Deep Denver Thickener ID: 228237

Tank With 48" support legs and 12" deep discharge cone to 2" discharge
Bridge with feed well
Denver Rake Drive with handwheel rake lift
1/2 HP Marathon Motor / Reducer Chain Driving Denver Rake Drive
Shaft with Single Arm Rake
Located: Western Canada

View more Thickeners

View details Remove

Toyo Sump Pump ID: 142232

Toyo Sump Pump.
- Speed: 1595 rpm.
  - Flow: 386 m³/hr.

Please contact us for more information.

Manufacturer:

TOYO

View details Remove

JWI J-Mate J360G Sludge Dryer ID: 1420942

JWI J-Mate J360G Sludge Dryer

Make: J-Mate (JWI Product)
Model: J360G
Type: Continuous Dryer
Year: 2008
Condition: Used, Reported in Good Working Condition
Water Removal Rate: 188 Lbs./hr. (85.3 L/hr.)
Sludge Throughput: 3.0-6.0 ft³/hr. (85-170 L/hr.)
Burner: Natural Gas
- Heat Output: 400,000 BTU
Stainless Steel Construction
- All SS Internal Wetted Parts in Drying Chamber
- 98% Efficient Stainless Steel Venturi Type Wet Scrubber
CSA Upgrades on Electrical and Gas
Electrical Requirements:
- Power Rating: 10kW
- Voltage: 240 Volt
- Current: 30 Amps
- Frequency: 60Hz
- Phase: 3-Phase
- Control Voltage: 120 Volt
Location: Eastern Canada