Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Square D Control Panels ID: 1388327
Square D Control Panels
Class: 900T
Type: SKY-3
Series: D
- Location: Savona, British Columbia, Canada
Marod 4 ton Battery locomotive. 24 in. track guage. ID: 42082
- Marod 4-Ton Locomotive.
- Comes With Drum Controller.
- Handle Wheel Brake.
- Dual 60-Volt Motors.
- Type V-49-6-4.
- 24-Inch Gauge.
- Complete With Battery Box.
ITE (Blueline) 2 Pole 30 Amp Push-in Breaker ID: 164982
- 120-240 VAC
- 2 Pole
- Push-in
- Quantity 9
View More 30 Amp Breakers
Andritz 1000mm Sidebar Filter Press System ID: 1126139
Andritz 1000mm Sidebar Filter Press System
Quantity: 4 Units (2x 1000/95, 70 Chamber Units)
(2 x 1000/40, 24 Chamber Units)
- 70 Chamber Units
- Make: Andritz
- Model: 1000/95, Mixed Pack Membrane
- Machine Type: 1000/HP/SR/70/32mm Filter Press
- (70) 32mm Chambers
- Type: Closed Filtrate
- Condition: New, Never Used
- No. of Stay Boss: 4
- Serial #'s: 12014, 12015
- Slurry Type: Silicate
- Inlet Consistency: 11-15% TSS
- Cake Density: 75 lb/ft³
- Slurry Temperature: 75°C Max
- pH: 0
- Guaranteed Cake Solids: 52%
- Maximum Cycle Time: 80 Minutes
- Size of Press: 1000 High Pressure
- Cake Thickness (Pre-Squeeze): 32 mm
- No. of Chambers: 70
- Filter Area: 1,217 ft²
- Capacity 1.56 m³ / 55ft³
- Pack Length: 514.73cm
- Weight of Empty Press: 15.88 Tonnes
- Hydraulic Unit: 5 HP
- Power Supply: 575V, 3-Phase, 60 Hz
- Plate Material: Polypropylene
- Slurry Feed Pressure (Max at 75°C.): 65 psi @ 75°C
- Squeeze Pressure (Max at 75°C.): 141 psi @ 75°C
- Flooded Weight of Machine: 20.412 Tonnes
- 24 Chamber Units
- Make: Andritz
- Model: 1000/40, Mixed Pack Membrane
- Machine Type: 1000/HP/SR/24/32mm Filter Press
- (24) 32mm Chambers
- Type: Closed Filtrate
- Serial #'s: 12016, 12017
- Condition: New, Never Used
- No. of Stay Boss: 4
- Slurry Type: Iron Hydroxide
- Inlet Consistency: 3% TSS
- Cake Density: 83 lb/ft³
- Slurry Temperature: 65°C Max
- pH: 13
- Guaranteed Cake Solids: 52%
- Maximum Cycle Time: 120 minutes
- Size of Press: 1000 High Pressure
- Cake Thickness (Pre-Squeeze): 32mm
- No. of Chambers: 24
- Filter Area: 417 ft²
- Capacity: 0.5352m³ / 19ft³
- Pack Length: 183.92cm
- Weight of Empty Press: 10.89 Tonnes
- Hydraulic Unit: 5 HP
- Power Supply: 575V, 3-Phase, 60 Hz
- Plate Material: Polypropylene
- Slurry Feed Pressure (Max at 75°C): 65psi @ 75°C
- Squeeze Pressure (Max at 75°C.): 141psi @ 75°C
- Flooded Weight of Machine: 11.74 Tonnes
- Filter Cloths
- Composition: Polypropylene
- Weight: 318.76 (grams/m²)
- Caliper: 0.46mm
- Porosity: 3-5 CFM
- Thread Count: 107 x 36
- Warp Yarn: Monofilament Black
- Filling Yarn: Multifilament
- Finish: Heat Set & Calendared
- Style: AFP 101
- Attachment: Plastic Tie
- Hydraulic Power Pack
- Nominal Motor Rating: 5 HP
- Voltage: 575 Volt
- Piston Diameter: 254mm
- Piston Rod Diameter: 127mm
- Piston Stroke (Maximum): 762mm
- Tank Volume: 113.57 Liters
- Pump Conveying Stream, 4500 psi: 18.93 Liters/Minute
- Pump Conveying Stream, 4500 psi: 8.71 Liters/Minute
- Motor Speed: 1750 RPM
- Enclosure: IP55
- Location: Canada
View More Plate Filters
1400 Gallon Steel Vessels ID: 1155873
1400 Gallon Steel Vessels
Quantity: 3
- Size: 1400 Gallon Approx.
- Diameter: 72in
- Height: 72in
- Steel
- Non-Lined
- On Stands
- Location: TBA
View More Steel Tanks
Eaton 400E Amp Fuse ID: 236939
- Model Number: 5BHLE - 400E
- 5.5 Max KV
- 400E Amps
- 50/60 Hz
- Max Int 65
- Location: Western Canada
View more Fuses
10,000 Gallon Portable Fuel Tank ID: 1014765
- Size: 10,000 Gallon
- Portable Single Axle
- Insulated and Skinned
- Side Ladder and Inspection Platform
- Rear Mounted Diesel Pump and Fuel Strainer Pump
- Location: Western USA
View more Fuel Tanks
2ft x 4ft Dillon 3-Deck Screen ID: 1394030
2ft x 4ft Dillon 3-Deck Screen
- Make: Dillon
- Model: 35.2.4.1
- Serial: 2732.81
- Type: Inclined Screen
- Condition: Used, Reported in Fair Condition
- Decks: 3-Decks
- Top Deck Spacing: 1in x 1in
- Middle Deck Spacing: 0.5in x 0.5in
- Bottom Deck: No Screen Installed
- Screen Area: 21in Wide x 48in Long (1,008in² Per Deck)
- Small Receiving Hopper: 29in Wide x 18in Long x 10in High
- Chutes Off Screen Ends:
- Top: 8in Wide x 86in Long
- Bottom: 8in Wide x 40in Long
- 1in Water Feed
- With Discharge Hopper: 7.9ft³ Approx.
- 2in Outlet
- Length: 52.5in
- Width: 32.5in
- Height: 24in
- Drive: Electric Motor
- Power Output: 3HP
- Voltage: 220/440 Volt
- Frequency: 60Hz
- Overall Dimensions: Not Including Discharge Hopper
- Length: 67in (+18in With Chutes)
- Width: 39in
- Height: 51in
- Location: Savona, British Columbia, Canada
View More Inclined Screens
Weima Briquetting System ID: 641237
System Components:
- Model: TH514
- Description: 2 in. Briquetter
- Manufacturer: Weima America Inc
- Press Type: Hydraulic
- Press Diameter: 2 in.
- Hours: 1410 hrs.
- Hopper Size: 55.1 x 55.1 x 37 in.
- Hopper Volume: 2.4 Cubic Yards
- Motor Size: 10 hp (7.5kW)
- Power: 460v/60Hz/3 Phase
- Weight: 2,094 lbs
- Machine Size: 94x74x59 in.
- Hopper, hydraulics and press are mounted on a frame with anti-vibration foundation
- Complete with:
- Hydraulic Oil Cooler
- Over Heating Protection
- Auto Shutoff when Feed Hopper is Empty
- This unit has paddles in feed hopper to eliminate bridging and insure proper feeding of press
- Condition: Good Working Order
- Model: TH814s
- Description: 3 in. Briquetter
- Manufacturer: Weima America Inc
- Press Type: Hydraulic
- Press Diameter: 3.1 in.
- Hours: 2710 hrs
- Hopper Size: 55.1 x 55.1 x 37 in.
- Hopper Volume: 2.4 Cubic Yards
- Motor Size: 20 hp (15kW)
- Power: 460v/60Hz/3 Phase
- Weight: 5,600 lbs
- Machine Size: 102"x100x59 in.
- Hopper, hydraulics and press are mounted on a frame with anti-vibration foundation
- Complete with:
- Hydraulic Oil Cooler
- Over Heating Protection
- Auto Shutoff when Feed Hopper is Empty
- This unit has paddles in feed hopper to eliminate bridging and insure proper feeding of press
- Condition: Good Working Order
- Model: wlk 13
- Description: Shredder
- Manufacturer: Weima America Inc
- Hours: 631 hrs
- Hopper Opening: 51.2x47.2 in.
- Rotor Type: Dia 14.5 in. x 51.2 in. V-Rotor
- Cutters: 70 pcs Indexable concave
- Extraction requirement: 3000 cfm, 10: diameter
- Motor Size: 100 hp (75kW)
- Power: 460v/60hz/ 3 phase
- Weight: 10,000 lbs
- Machine Size: 102x98x75 in.
- Control Panel Size: 40x18x71 in.
- Shredder has anti-vibration foundation. Hydraulic ram with auto reverse presses material against the rotor for quicker material processing.
- Control panel is a stand-alone unit.
- Condition: Good Working Order
- System includes
- Pipes to Run from Blower to Cyclone.
- Takes output from shredder and blows it into cyclone which is currently mounted on the top of our storage hopper.
- Cyclone Size: 45x48x72 in. Bolting flange on bottom
- Blower Size: 52x56x45 in. Mounted on plate with motor. Belt drive
- Weight: Included in shredder weight
- Power: 460v/60hz/ 3 phase
- Motor Size: 15 hp (11kW)
- Hours: 700 hrs
- Manufacturer: Weima America Inc
- Description: Blower/Cyclone
- Model: Pneumatic Discharge System
- Model: DFC-24
- Description: Dust Collector
- Manufacturer: Cleanair America
- CFM: 10,000
- Cloth Area: 5760 Sq Feet
- Motor Size: 15 hp
- Power: 220v/60hz/ 3 phase
- Weight: unknown
- Size: 70x110x170in.
- Media: 24 cartridge filters
- Dust collector has an air pulse system clean filters at timed intervals and at shut down.
- Condition: Good Working Order
- Location: Central Canada
View more Recycling Equipment
General Electric 3 Pole 30 Amp Breaker ID: 339493
Style= TEC36030
600 VAC
Instantaneouse Trip Settins:
Lo = 90 A
2 =140 A
4 =190 A
6 = 240 A
8 = 290 A
10 = 340 A
HI = 390 A
Westinghouse 3 Pole 150 Amp HMCP Breaker ID: 164095
- 600 VAC
- 250 VDC
- 3 Phase
- Cat #: HMCP150U4S
- Style #: 8985A91G20
- Instantaneous Trip Settings: 750 Amp - 2500 Amp
- Quantity 3
View More 150 Amp Breakers
Manufacturer: | WESTINGHOUSE |