Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
2010 New Holland D225 Dozer ID: 234734
- Year: 2010
- Ripper
- Straight Blade with Hydr. Tilt
- Engine:
- Cummins 6CTAA
- 8.3 Liter
- Location: Europe
View more Dozers
Greenlee Cable Puller ID: 250310
- Pulling Capacity:
- 6500 lbs Max
- 5000 lbs Continuous
- Specified Rope:
- 3/4 Double Braided Polyester Composite Rope with:
- Breaking Strength of 26,000 lbs
- 3/4 Double Braided Polyester Composite Rope with:
- Motor TEFC:
- HP: 1.5
- Volts: 120
- Hz: 60
- Location: Western Canada
View more Shop Tools
Casagrande C11 Micropiling Rig ID: 173440
- Year: 1999 (new engine fitted in 2009).
- Micropiling type.
- Mast: 17 m (can work with range 3 drilling equipment.
- Road loader for 2 x 10 meter rods.
- Clamps at base of mast.
- 35 tonne machine.
View more Rotary Drills
Sperry Size 30 Plate Filter ID: 154928
- 136 ft².
- Type: 47, 48, 49.
- 5.6 ft³ of cake value.
- 6 in. x 16 in. hydraulic cylinder closer.
- 14 polypropylene plates with felt cloth.
- Can use paper for finer filtration.
Please contact us for more information.
View more Plate Filters
Sullair LS-10 125 PSI Air Compressor ID: 188403
- Model: LS10-40H ACAC.
- S/N: 003-104453.
- Max Pressure: 115/125 PSIG.
- 40 HP.
- B.O.M No. 251334-004.
- 8/8.5 In. Bar.
View more Stationary Compressors
Gold Machine Model 100 Trommel Wash Plant ID: 580600
Specifications:
- Capacity: 100 Cubic Yards Per Hour
- All Electric drives
- On Board Kubota Diesel Generator
- Model V3600-T
- Stamford Generator
- 230/460 volt Output
- Siemens Electrical control panel
- Feed hopper with spray bars and electric vibrator
- 1.5 HP motor
- Inner drum driven by a 20 HP SEW-Eurodrive gearhead motor
- 12.39 - 1 ratio.
- Chain drive to drum
- Supported on solid rubber Tires
- Tire Size: 413/178-285.8
- Outer drum driven by a 7.5 HP SEW-Eurodrive gearhead motor
- 47.58 - 1 ratio.
- Chain drive to drum
- Supported on solid rubber tires
- Tire Size: 413/178-285.8
- All Mounted on a Tandem Axle chassis
- Complete with dual sluice runs and overs discharge conveyor
- Material Size Processed: 30 in. minus
- 4" Main water Connection
- Water Consumption: Approx. 700 GPM
- Pressure range 35 - 50 PSI
- Feed Methods: 200 - 300 Series Excavator or 3 – 4 cu. Yard Wheel Loader
Details:
- The vibrating wet-feed hopper is 12'L x 7'6"W and can handle up to 30" rock.
- Water will need to be supplied from your own 6" water pump, about 700 gallons per minute usage.
- The mid-size tailings are stacked by a 30" wide conveyor, allowing ample time for tailings removal.
- The main sluice is fed concentrated materials from the spiral drum, containing 90%+ of your total recovered gold, making for very easy clean up.
- An additional 5%+ is captured by the larger tail sluice, resulting in a total recovery rate of 95%+ (down to 50 micron).
- The machine is self-contained on a tridem axle trailer.
- Dimensions: 40'L x 7'6"W x 9'6"H
- Weight: Approx. 28,000lbs
- Located: British Columbia, Canada
You Tube Link https://www.youtube.com/watch?v=1ZUUPNlFkXs
View more Trommels
Used CEC Portable Screen. 6 ft. x 16 ft. - 3 Deck. Incline Style. Diesel Driven with Deutz Engine, 200 HRS. ID: 44619
Used CEC Portable Screen. 6 ft. x 16 ft. - 3 Deck. Incline Style. Diesel Driven with Deutz Engine, 200 HRS.