Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
2005 Volvo EC330B LC Excavator ID: 1156736
2005 Volvo EC330B LC Excavator
- Make: Volvo
- Model: EC330B LC
- Year: 2005
- Hours: 7,725 Hours
- Bucket Capacity: 1.9yd³
- Engine
- Number Of Cylinders: 6
- Engine Make: Volvo
- Engine Model: D12C
- Power Output: 198HP @1700rpm
- Max Torque: 998 lb-ft @1275rpm
- Displacement: 738cu in
- Aspiration: Turbocharged
- Undercarriage
- Track Gauge: 8.5ft
- Shoe Size: 23.63in
- Max Travel Speed: 2.8 mph
- Number Of Carrier Rollers Per Side: 2
- Number Of Shoes Per Side: 48
- Ground Pressure: 8.92 PSI
- Number Of Track Rollers Per Side: 8
- Operational
- Operating Weight: 77,161.8lb
- Fuel Capacity: 163.8 Gal
- Cooling System Fluid Capacity: 17.3 Gal
- Hydraulic System Fluid Capacity: 132.1 Gal
- Operating Voltage: 24V
- Engine Oil Capacity: 10.9 Gal
- Swing Drive Fluid Capacity: 1.6 Gal
- Alternator Supplied Amperage: 80 Amps
- Hydraulic System Relief Valve Pressure: 4974.8 PSI
- Hydraulic Pump Flow Capacity: 148 Gal/min
- Dimensions:
- Length: 36.5Ft
- Width: 10.47Ft
- Height: 10.47Ft
- Weight: 77,161.8 Lbs.
- Additional Notes:
- Ground Clearance: 1.65ft
- Width To Outside Of Tracks: 10.47ft
- Length Of Track On Ground: 13.19ft
- Tail Swing Radius: 11.13ft
- One Owner
- Aux Hydraulics
- Quick Coupler
- Rebuilt Engine
- Location: Eastern USA
View More Large Excavators
Reliance Electric 15 HP Electric Motor ID: 380198
- 15 HP
- 575 Volt
- 1180 RPM
- Frame: 284TD
- 3 Phase
- 60 Hz
- Location: Western Canada
View more Electric Motors
Komatsu PC240 LC-8 Excavator ID: 186153
- Located in Germany.
- Year: 2008.
- Hours: 11,000.
- Model: PC240LC-8.
- Mono-boom.
- Piped for grapple and hammer.
- 600 mm tracks.
- Undercarriage: 70% (approx.).
- Komatsu 158 HP motor.
Please contact us for more information.
View more Large Excavators
Manufacturer: | KOMATSU |
Denver SRL Slurry Pump. ID: 44890
- Size 1 Frame
- Rubber lined
- 1.5 inch Inlet
- 1.25 inch Discharge
- Adjustable overhead motor base
- Belt guard
- Can be supplied with Electric Motor
12" x 14' In-Feed Conveyor ID: 232650
- 14'L x 12" Sides
- 24" W Rubber Belt
- 1.5 Cleats
- HP: 1.5
- Tri Volts
- Location: Eastern USA
View more Conveyors
5000 GALLON TANK. 7 FT DIA. X 21 FT LONG. SKID MOUNTED ID: 45117
5000 GALLON TANK. 7 FT DIA. X 21 FT LONG. SKID MOUNTED
2011 Atlas Copco CS14 Diamond Core Drill ID: 1106332
2011 Atlas Copco CS14 Diamond Core Drill
-
Make: Atlas Copco Epiroc
-
Model: CS14
-
Engine: Cummins QSB6.7 Diesel
-
Hours: 8500 Approx.
- Included In Package
- CS14 Drill
- Hydraulic Controls
- Heavy Duty Skid
- Enclosure with fold out work platforms
- Pump
- Hoist
- Wireline
-
Condition: Good, Used
-
Location: British Columbia, Canada
-
General Specifications:
- Depth capacity coring (wireline or conventional)
B wireline 1540 m (5052 ft)
N wireline 1200 m (4042 ft)
H wireline 800 m (2695 ft)
P wireline 475 m (1558 ft)
Depth are based on vertical hole - Main hoist
Single line capacity: Bare drum 80 kN (18,000 lb)
Line speed: Bare drum 44 m/min (148 ft/min)
Cable size: 35 m (118 ft) x 16 mm (10/16 in) - Wireline Capacity:
- 1830 m (6000 ft) of 4.76 mm (3/16 in)
- 975 m (3200 ft) of 6.35 mm (1/4 in)
- Line pull: bare drum: 11.9 kN (2665 lb)
full drum: 3.0 kN (668 lb) - Line speed: bare drum 114 m/min (374 ft/min)
full drum 453 m/min (1486 ft/min) - Mast and feed system
- Feed travel: 3.5 m (11.5 ft)
- Feed speeds: fast and slow with variable control
- Thrust: 59.6 kN (13,390 lb)
- Pull: 138 kN (31,020 lb)
- Drilling angle: 45 to 90 degrees
- Rod pull length: 6.09 m (20 ft)
- Power unit
- Manufacture: Cummins
- Model: QSB6,7 Tier III
- Volume: 6.7 liter 6 cylinder
- Power: 153 kW (208 HP)
- RPM: 1800
- Engine type: Diesel turbocharged/after cooled
- Cooling: Water
- Hydraulic system
- Primary pump: 28 MPa – 242 l/min (4061 psi – 63.9 gal/min)
- Secondary pump: 20 MPa – 122 l/min (2901 psi – 32.2 gal/min)
- Auxiliary pump: 21.5 MPa – 47 l/min (3118 psi – 12.4 gal/min)
- Hydraulic oil cooling: Air
- Drillhead and spindle speeds
- Power: hydraulic motor – variable speed/reversible
- Final drive: 4 in chain driven in oil bath – 2,5 ratio
- Spindle (inner diameter): 117 mm (4 5/8 in)
- Spindle speeds:
Ratio Speed, RPM Torque, Nm (ftlb)
1st 6.63:1 117-196 5113-3051 (3771-2250)
2nd 3.17:1 245-410 2445-1459 (1803-1076)
3rd 1.72:1 451-756 1326-792 (978-584)
4th 1.00:1 776-1300 771-460 (569-340)
Range selection: manual control from operator’s station
Hinged head: swing away
- Depth capacity coring (wireline or conventional)
-
Chuck assembly
- Type: hydraulic open, spring closed
- Maximum inside diameter: 117 mm (4 5/8 in)
- Holding capacity: 18,143 kg (40,000 lb)
- Type: hydraulic open, spring closed
- Rod Holder
- Type: hydraulic open, gas spring closed
- Maximum inside diameter: 210 mm (8.3 in)
- Holding capacity: 13,000 kg (28,660 lb)
- Weight
CS14 incl. Trido140 and Rod Holder: 7,000 kg (15,430 lb) - Dimensions (L – W – H)
- In transport position (top mast removed):
6370 mm (21,45ft) 2200 mm (7,22ft) 2340 mm (7,88ft) - Transport on drill site (top mast folded):
6370 mm (21,45ft) 2550 mm (8,59ft) 2340 mm (7,88ft)
- In transport position (top mast removed):
View More Diamond Core Drills
Traylor 24 x 36 Jaw Crusher ID: 334526
- Type: H
- Heavy Duty
- Single Piece Frame
- Babbitt Bearing
- Newly Installed
- Corrugated Swing Jaw
- Flat Stationary Jaw 2 1/2in. Thick
- Check Liners 1 1/2in. Thick
- Unit was Refurbished and not put Back to Work
- Location: Eastern Canada
View more Jaw Crushers