Quotes

Equipment Quotes

Year: 2005.
Drive system: Diesel-hydrostatic.
Usage: tunnel & underground.
Track gauge: 1000 mm (can be changed to 900 mm).
Deutz 250 HP diesel engines.
Max. speed: 32 km/h.
Min. curve radius: 40 m.
Min. track clearance: 15 mm.
Structure:
- Continuous main frame in box design.
- Engine compartment with access flaps for maintenance purposes.
- Fuel tank mounted on main frame and protected against collisions.
- Rail guards adjustable in height.
- Electric components inside enclosed cubicle in the drivers cabin.
Locomotive main frame:
- Main frame in box design with high torsion resistance.
- MAG welded.
- Side plates with cut-outs for inspection of axle gears, brake gears, etc.
- 2 lifting points at both sides.
Operators cabin:
- 2 door cabin.
- One operators desk with ergonomic arrangement of controls and levers.
- Front window equipped with wipers.
Fuel system:
- Filler caps at both sids of the locomotive.
- Fuel gauge on operators panel.
- Fuel tank capacity: 600 L approx.
Quantity: 1.

TIME Advanced Stoper Longhole Drill

Make: TIME
Model: Advanced Stoper
Year: 2023
Type: Longhole Drill
Condition: New, No Hours
Drill: S36 IR Drifter Drill
- Aluminum Feed
- Heavy-Duty Centralizer (Used)
- Nominal Diameter: 35 - 89 mm (1.38in-3.5in)
- Nominal Length: Up To 46m (Up To 150ft)
- Reamed Diameter: Up To 127mm (Up To 5in)
- Blows/Minute: 1630 @ 500 kPa (1630 @ 72.52 PSI)
- Air Consumption: 14m³/min @ 500 kPa (494.41 CFM @ 72.52 PSI)
Traverse: 5ft Traverse
- Side to Side Hole Positioning of 66in (168cm)
(3) Helac Actuators for Increased Stability and Less Wear Parts
- 135° Dump, 360° Radial and an Optional 180° Pivot Positioning
Carrier:
- 30HP Radial Piston Air Motor (@1200 RPM)
  - 116 PSI & 890 CFM Air Delivery
- Tandem Gear Hydraulic Pump
  - 1.91in³ Per Rev. @3000 PSI
- High Quality Proportional Directional Control Valves
- High Quality Motion Control and Cross-Port Check Valves
- Two Lever Pilot (Low) Pressure Tethered Remote Tramming Valve
- Skid Steering with Independent Port and Starboard Wheel Drives
- Planetary 4-Wheel Hydraulic Drive with Fail-Safe Brakes
- 4 Independent Heavy-Duty Jacks with Load Lock (Cross Port Check) Valves for Leveling
- Tow-Bar and Dis-Engaging Wheel Drives for Towing
- Rotation Barrier – Double Hinged (Opens from the Left or Right Side)
Location: Eastern Canada