Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
GD 10 hp Sutorbilt MAC Pressure Blower ID: 236374
- Model: 520 H GAEMCRA0190
- Mfg: MAC Equipment
- HP: 10
- Volts: 208-230/460
- Phase: 3
- Metal Stand
- Inlet Air Filter
- Pressure Relief Valve
- Inlet and Discharge Silencer
- Location: Eastern USA
View more Blowers
Hyster H110XL Forklift ID: 305227
- Model: H110XL
- Hours: 3563
- Max. lift capacity: 11000 lbs
- Max. lift height: 167in. (13ft.11in.)
- Mast height lowered: 106in. (8ft.10in.)
- 2-stage mast
- Year: 1993
- Tires: cushion
- Attachment: SS
- Location: Western Canada
View more Forklifts
Hyster 15,000 lbs Forklift ID: 358348
- Model: H155XL
- Max Lift Capacity: 15,500 lbs
- Lowered Height: 127in.
- Raised Height: 173in.
- Hours: 1456
- Tire Type: Cushion
- 2-stage
- Fuel Type: D
- Attachment: SS
- Year: 1987
- Location: Western Canada
View more Forklifts
2000 CFM Blower ID: 179322
- Static pressure: 10.
- Inlet: 8 in. diameter.
- Outlet: 7 in. x 9 in.
- Blade wheel diameter: 15¾ in.
- 7.5 HP motor.
- 230/460V.
- 3520 rpm.
- Frame: 213T.
View more Centrifugal Blowers
20,000 CFM Centrifugal Blower ID: 1232290
20,000 CFM Centrifugal Blower
- CFM: 20000
- Static Pressure: 12"
- Inlet Diameter: 24.5" Flanged Inlet
- Discharge: 19.5" x 24.5" Flanged Outlet
- Wheel Diameter: 35" Backwards Curved Wheel
- Drive: Direct Drive
- Make: ABB TEFC Motor
- Model: M3AA 225 SMC 4
- Power Output: 60HP (45kW)
- RPM: 1785 RPM
- Voltage: 480 Volt
- Amperage: 68 Amps
- Phase: 3-Phase
- Frequency: 60Hz
- Overall Dimensions:
- Length: 74"
- Width: 54"
- Height: 64"
- Weight: 1,900 Lbs.
- Location: Eastern USA
View More Centrifugal Blowers
Atlas Copco ST1000 Scooptram ID: 1197123
Atlas Copco ST1000 Scooptram
- Make: Atlas Copco
- Model: ST-1000
- Year: 2010
- Hours: 4,875
- Condition: Completely Operational
- Bucket Size: 6yd³
- Tramming Capacity: 10,000 Kgs (22,000 lbs.)
- Static Tipping Capacity: 20,736 Kgs (45,714 lbs.)
- Breakout Force, Hydraulic: 14,958 Kgs (33,000 lbs.)
- Breakout Force, Mechanical: 31,750 Kgs (70,000 lbs.)
- Boom Speeds
- Raising: 7.9 Seconds
- Lowering: 7.1 Seconds
- Bucket Speeds
- Dump: 2.7 Seconds
- Roll Back: 3.9 Seconds
- Engine: Detroit Diesel Series 50
-
Transverter: Funk Model DF250
- Axles: Spicer 19D2748
- Differentials: Spiral Bevel Differential, Full Floating, Planetary Wheel End Drive
- Brakes: SAHR; Enclosed, Force Cooled, Multiple Wet Discs
- Tires: 18.00 x 25, 24 Ply, L-5S
- Turning Angle: 85° (45° Each Way)
- Canopy: ROPS Canopy
- Overall Dimensions:
- Length: 388in (9,874mm)
- Width: 89in (2,259mm)
- Height: 99in (2,534mm)
- Weight: 26,300 Kgs (58,000 Lbs.)
- Location: South America
View More Scooptrams
Soilmec R412HD Rotary Piling Drill ID: 172902
- Manufactured: 2002.
- Working hours: 16,224.
- Base machine: CAT 3.25B.
- Undercarriage: D5L CAT (3900/2800 mm).
- Diesel engine: CAT-6M800507.
- Kelly bar DN 355 mm, mechanical locking 4 x 8 m, Kelly box 130 x 130 mm.
- Kelly guide, kelly swivel.
- Main winch SW150 & main rope.
- Service winch SW 90.1&+ service rope
- Pull down cylinder system (120 kN), stroke 5100 mm.
- Reconditioning:
- Overhauled engine in 2015.
- New upper rotary gear box in 2015.
- Resealed rotary in 2015.
- Resealed mast pistons in 2016.
- New main hydraulic pumps in 2016.
- New mast bearings in 2016.
- Kelly bar overhauled in 2016.
- Slewing ring is okay.
Please contact us for more information.
View more Rotary Drills