Equipment Quotes
Henan Shibo 2PG400X250 Double Roll Crusher ID: 1424568
Henan Shibo 2PG400X250 Double Roll Crusher
- Make: Henan Shibo Mechanical Engineering Co.
- Model: 2PG400X250
- Condition: Used, Reported in Good Condition
- Hours: Less Than 40 Hours Use
- Number of Rolls: 2 Rolls
- Capacity: 5-15 TPH
- Roll Diameter: 400mm (15.7in)
- Roll Length: 250mm (9.8in)
- Teeth Material: ZGMn13
- Max Feed Size: 25mm
- Discharge Size: 2-8mm
- Compression Strength: 180 MPa
- Comes with Channel Steel Stand With Fork Pockets and Stairs
- Drive: (2) Electric Motors
- Power Output: 5.5kW
- Roller Speed: 180 RPM
- Voltage: 600 Volts
- Frequency: 60Hz
- Phase: 3-Phase
- Overall Dimensions: Crusher Only
- Length: 1,837.5mm (72.3in)
- Width: 1,904mm (75in)
- Height: 1,001mm (39.4in)
- Weight: 1.5 Tons
- Location: Eastern Canada
View More Roll Crushers
3 KVA Westinghouse 480 - 120/240 Single phase For Sale ID: 50747
3 KVA Westinghouse Transformer
480 - 120/240 Single phase
Come With built in 8 Circuit breaker Panel
Epoxy Coated
16 in. x 15 ft. Column Cell Assembly ID: 102055
- Column cell assembly.
- 16 in. dia. x 15 ft. high.
- Spray nozzle assembly.
- Top concentrate launder.
View more Floatation Cell
14,500 Gallon Fiberglass Tank ID: 152329
- 8.5 ft. x 40 ft. Fiberglass Tank.
- Double walled.
- Capacity: 14,500 gallons / 50,000 litres.
- Steel manway.
- 5 - 4 in. threaded fittings.
- External baffles for burial.
- Tank previously used for fuel.
- Defumed and aerated.
- Ideal for Fire protection.
Please contact is for more information.
Buss 200 Amp 250 Volt Fuse ID: 522336
Amp: 200
Volt: 250
CAT#: NON-200
One Time Fuse
Honeywell Timer ID: 1263141
Honeywell Timer
Type: 117
P75EAAP5
RPM 1/2
120V
CY 60
W 2.7
Tamrock DHA 550 Quarry Drill ID: 109112
- Tamrock Quarry Drill.
- Model: DHA 550.
- Year: 1999.
- Hours: 1,080.
- Enclosed cab with air conditioning.
- Deutz 6 cylinder diesel engine.
- Rebuilt in 2014.
- Hours: 7,483.
- Reported to be in excellent working condition.
- Can drill up to 300 meters.
Manufacturer: | TAMROCK |
Syntron Vibrating Pan Controller ID: 845418
- Model: CRSC-2C
- Volts: 460
- Amps: 30
- Single Phase
- 60 Hz
- Location: British Columbia, Canada
View more Vibrating Pan Feeders
Wagner HST-1A Scooptram ID: 1424661
Wagner HST-1A Scooptram
- Make: Wagner Mining Equipment
- Model: HST-1A
- Year: Refurbished in 2021
- Hours: 293.4 Hours
- Condition: Used, Reported in Good Condition
- Capacity: 1-Yard
- Engine: Deutz F4L-912W
- MSHA Certified - Approx. 6 Months Ago
- Canopy: Equipped
- General Model Specifications:
- Capacity:
- Breakout Force: 3,157 kg (6,960 Lbs.)
- Break Out Force, Hydraulic: 3,824 kg (8,430 Lbs.)
- Tramming Capacity: 1,361 kg (3,000 Lbs.)
- Bucket:
- Nominal Heaped: 0.76m³ (1.0yd³)
- Struck: 0.67m³ (0.875yd³)
- Boom Raising Time: 4.3 Seconds
- Boom Lowering Time: 3.6 Seconds
- Bucket Dump Time: 2.5 Seconds
- Engine: Deutz Diesel F4L-912W
- Power Output: 55HP (41kW)
- Max Torque: 135 ft-lbs. (183Nm)
- Cooling: Air Cooled
- Steering: Articulated, Hydraulic Power Steering
- Turning Angle: 85° (42.5° Each Way)
- System Pressure: 12.4MPa (1,800 PSI)
- Capacity:
- Location: West Central USA
View More Scooptrams
Cutler Hammer 400 Amp Distribution Panel ID: 155943
- 1st Section:
- 120/208V.
- 3 phase.
- 4 wire.
- BA Bolt-in breakers.
- 72 circuit.
- 59 single pole 15 amp breakers.
- 1 double pole 15 amp breaker.
- 3 single pole 30 amp breakers.
- 120/208V.
- 2nd Section:
- 120/208V.
- 3 phase.
- 4 wire.
- BA Bolt-in breakers.
- 72 circuit.
- 58 single pole 15 amp breakers.
- 1 double pole 15 amp breaker.
- 120/208V.
Please contact us for more information.
View more 400 Amp Panels
View Our Inventory of Breakers
Vibramech H2-48-24 2-Deck Horizontal Screen ID: 1388219
Vibramech H2-48-24 2-Deck Horizontal Screen
- Make: Vibramech
- Model: H2-48-24
- Year: 2010
- Condition: Used, Reported in Good Condition
- Number of Decks: 2-Deck
- Inclination: Horizontal
- Spray Bars: 4
- Vibration Motors: 4 x 11 kW
-
Deck Width: 2,440mm (96.1in)
-
Deck Length: 4,880mm (192.1in)
- Overall Dimensions:
- Width: 3,160mm (124.4in)
- Length: 5,862mm (230.8in)
- Height: 3,514mm (138.3in)
- Weight: 12,000 kg
- Location: Western Canada
View More Horizontal Screens
Square D 2 Pole 50 Amp Breakers ID: 335435
- 2 Pole
- Amp: 50
- Volt: 120/240
- Style: Bolt On
- Type: QOB
- Single Phase
- 4 Units Available
- Location: British Columbia, Canada
View more Breakers
2012 Caterpillar 416F Backhoe ID: 179064
- Hours: 1920
- Engine Specifications
- Net Power: 87.0 hp
- Model: Cat C4.4 ACERT DIT
- Displacement 268.0 in3
- Fuel type Diesel
- Backhoe specifications (standard)
- Dig depth standard 14.3 ft.
- Reach from swing pivot 18.42 ft.
- Bucket rotation 205 degrees
- Bucket dig force 12973 lb.
- Loading height 11.9 ft.
- Loading reach 6.0 ft.
- Loader specifications
- Bucket capacity: 1.0 yd3
- Width 7.42 ft
- Dump height @ max angle 9.25 ft
- Dump reach @ max angle 2.42 ft
- Dig depth 3 in
- Lift capacity 6751 lb
- Bucket breakout force 107762 lb
- Please contact for more information
- View More Backhoes
Manufacturer: | CATERPILLAR |
Ingersoll-Rand 60NM-4C 2 Drum Electric Slusher ID: 171816
- SIZE: 60NM-4C.
- Rope pull: 6600 lbs.
- Average Rope Speed 300 feet per minute.
- 60 HP motor.
- 575V.
- 1725 rpm.
- Mounted on steel skid.
View more Double Drum Electric Slushers Hoists
Hoffman MicroSwitch ID: 1387580
Hoffman MicroSwitch
600V AC
- Location: Savona, British Columbia, Canada
Westinghouse 2 Pole 20 Amp FDB Breaker ID: 191558
- 600 VAC Max
- 250 VDC
- 2 Pole
- Cat #: FDB2020
- Quantity 1
View More 2 Pole 20 Amp Breakers
Manufacturer: | WESTINGHOUSE |
112.5 KVA 600-208Y/120 Volt - 3 Phase Marcus Transformer For Sale ID: 45042
- 112.5 KVA Marcus Transformer
- 600-208Y/120 Volt
- 3 Phase
Savona Equipment HD 10 x 20 Derocker ID: 185351
- Standard size: 10 ft. x 20 ft. (3 m x 6 m).
- Max Capacity: 200 TPH
Features:
- Made in Canada and available worldwide
- Most effective design for maximum throughput and gold recovery
- All components are extra heavy duty
- Removable hopper for ease of shipping
- Derocker can be transported level and raised to correct pitch once in place.
Specifications:
- Max Capacity: 200 TPH
- Size: 10 ft. x 20 ft. (3 m x 6 m).
- Water requirement: Approx 3,500 GPM (13,300 L/min).
- Diesel Hydraulic drive.
- Electric drive optional.
- Removable feed hopper included
- Discharge chute included
- All skid mounted
- Shipping Dimensions: (L x W): 22 ft. x 10 ft. 8½ in. (6.71 m x 3.26 m)
- Weight: 40,000 lbs / 18,200 kg.
Options Available:
- Custom sluice boxes
- Custom sized derockers
- Custom drive options
Ask Savona Equipment how we can help you with additional new or used equipment to complete your process.
View More Derockers
Manufacturer: | Savona Equipment |
R.A Warren 4 Ton Battery Locomotive ID: 1013601
- 30 in. Rail Gauge
- Solid State Control Hydraulic Brakes
- No Battery Box
- Approx. Dimensions: 45 in. Wide x 145 in. Long x 45 in. High
- Location: Western Canada
View more Locomotives
Marcus 45 kVA Transformer ID: 147091
- Marcus 45 kVA Transformer.
- High voltage: 600V.
- Low voltage: 120/208V.
- 3 phase.
- 60 Hz.
- Indoor dry type.
- Energy efficient.
- Shipping information:
- Dimensions (L x W x H):
- 19 in. x 30 in. x 30 in.
- 48 cm x 76 cm x 76 cm.
- Dimensions (L x W x H):
Please contact us for more information.
7/8 in. Hex Drill Steel. Various Lengths. ID: 43511
7/8 in. Hex Drill Steel. Various Lengths.
40-foot generator/parts van ID: 45313
- Tandem axle with 5th wheel pin and landing gear.
- Air intake louvres at both ends.
Deister 72 in. x 14 ft. Vibrating Pan Feeder ID: 209333
- 72 in. wide.
- 14 ft. long.
- Type: VFB-7214
- Never used.
View more Vibrating Pan Feeders
Atlas Copco ROC D7-11 and ROC D7-RRC Drill Package ID: 1418455
Atlas Copco ROC D7-11 and ROC D7-RRC Drill Package
Quantity: 2 Drill Package
- Make: Atlas Copco
- Models: ROC D7-11 and ROC D7-RRC
- Type:
- D7-11: Quarry Drill
- D7-RRC Radio Remote Control Rock Drill
- Years:
- D7-11: 2010
- D7-RRC: 2006
- Hours:
- D7-11:
- Frame Hours: 8,050 Hours
- Impact Hours: 2,874 Hours
- D7-RRC:
- Frame Hours:
- Impact Hours:
- D7-11:
- Condition: Used, Reported in Working Condition
- Comes with Spare Atlas Copco COP 1840 Drifter Drill
- ROC D7-11 General Model Specifications:
- Rock Drill: Atlas Copco COP 1840
- Impact Power: 20kW (26.8HP)
- Hydraulic Pressure: 230 bar (3,335 PSI)
- Impact Rate: 42-50Hz
- Torque: 1,180Nm (870lbf/ft)
- Hole Range:
- T38, T45, T51 Drill Steel: 64-115mm (2½”- 4½”)
- Hydraulic Rod Handling System for Max Hole Depth (with 3.6m (12’) Extension Rods)
- T38, T45: 28m (92’)
- T51: 21m (69')
- Engine: CAT C7, Tier III/Stage 3
- Power: 168kW (225HP)
- Feed: Hydraulic Cylinder Feed with Hose Guide and Double Drill Steel Support with Movable Lower Guide/Dust Hood
- Feed Extension: 1,400mm (4 ’7’')
- Feed Rate, Max: 0.92 m/s (184 ft/min)
- Feed Force, Max: 20kN (4,400 lbf)
- Tractive Pull, Max: 20kN (4,400 lbf)
- Total Length: 7,140mm (23’ 5’’)
- Travel Length: 4,240mm (14’)
- Dust Collector: DCT 110D
- Filter Area: 11m² (118ft²)
- Number of filter elements: 11 pcs
- Suction Capacity at 500mm W.G.: 560 l/s (1,200 CFM)
- Suction Hose Diameter: 127mm (5’’)
- Cleaning Air Pressure, Max: 7.5 bar (109 PSI)
- Cleaning Air Consumption: 2-4 l/pulse (0.06 - 0.12 ft³/pulse)
- Hydraulic System:
- Anti-Jamming
- Automatic Feed Force Control: RPC-F
- Damper Pressure Control: Impact DPC-I
- Hydraulic oil cooler - Max Ambient Temperature: 50°C (122°F)
- Rock Drill: Atlas Copco COP 1840
- ROC D7-RRC Rock Drill General Model Specifications:
- Recommended hole range for ROC D7
- T38, T45: 64-115mm (2.5”- 4”)
- Hole Depth: 28m (approx. 92’)
- T51: 21m (69’)
- Engine ROC D7: Caterpillar Water-Cooled Turbocharged Diesel
- Model: CAT 3126B
- Power: 149kW (203HP)
- Hydraulic Rock Drill ROC D7:
- Model: Atlas Copco COP 1840 Drifter
- Impact Power, Max: 18kW (24.5HP)
- Hydraulic Pressure, Max: 230 bar (3,335 PSI)
- Torque, Max: 980Nm (724 lbf/ft)
- Weight: Approx. 171kg
- Boom: Folding Boom
- Air Compressor ROC D7:
- Make/Model: Atlas Copco Screw Compressor C106
- Working Pressure, Max: 10.5 bar (152 PSI)
- FAD: 105 l/s (215 CFM)
- Or 127 l/s (270 CFM)
- Fuel Tank Capacity: 280 liters (73 US Gal.)
- Feed:
- Feed Length, Total: 7,140mm (24’)
- Travel Length: 4,240mm (15’)
- Feed Extension: 1,400mm (4’ 3”)
- Feed Rate, Max: 0.92 m/s (180 ft/min)
- Feed Force, Max: 20kN (4,400 lbf)
- Tramming:
- Tramming Speed: 3.1 km/h (2 mph)
- Traction Force: 110kN (25,000 lbf)
- Hill Climbing Ability: 20° (30° with Winch)
- Track Oscillation: ±12°
- Ground Clearance: 455mm (17.5”)
- Transport Dimensions:
- Length: 10,710mm (35’ 2”)
- Width: 2,370mm (7’ 10”)
- Height: 3,100mm (10’ 2”)
- Weight: 13,000 kg (29,300 lbs.)
- Recommended hole range for ROC D7
- Location: Northwest USA
View More Quarry Drills
CIA Fuse Holder ID: 1394129
CIA Fuse Holder
30A
600V AC
CIA Fuses Only
- Location: Savona, British Columbia, Canada
Franklin Miller RM1010M Roll Crusher ID: 1260420
Franklin Miller RM1010M Roll Crusher
- Make: Franklin Miller
- Model: RM 1010M
- Rolls Diameter: 10in Diameter x 10in Long
- Infeed Hopper Dimensions:
- Length: 25in
- Width: 18in
- Height: 23in
- Discharge Hopper Dimensions:
- Length: 17in
- Width: 23in
- Depth: 8in
- With 8in Diameter Discharge
- Drive Shive: 12in Dia x 1.75in Wide - 3 Groove
- Mounted on 2.5in x 2.5in Tubing Frame
- Overall Dimensions:
- Length: 75in
- Width: 48in
- Height: 93in
- Location: Savona, British Columbia, Canada
View More Roll Crushers
U.S. Stoneware 4 ft. x 5 ft. Pebble Mill ID: 211432
- US Stoneware pebble mill.
- Serial No.: ZZ59123.
- Approximately 4 ft. diameter x 5 ft. long.
- Ceramic lined.
- Outboard roller bearings on stands.
- Comes with 10 hp motor drive.
View more Batch Mills
Delta Industrial 30 in Knife Valve ID: 143922
- Delta Industrial Knife Gate Valve.
- Model: V-0088.
- Size: 30 in.
- Seals: GFLT.
- Class: 150.
- Max. temperature: 400°F.
- Body: CS.
- Size: 30 in.
- Unit is reported in fair condition.
- Model: V-0088.
Please contact us for more information.
Manufacturer: | Delta |
20,000 Gallon Steel Storage Tank ID: 54711
- Vertical style.
- 12 ft. dia. x 35 ft. tall.
- 3/16 - 1/4 in. steel wall with epoxy lining.
- Reinforced base with metal skirt.
- Last used to store milk.
- Has been cleaned out.
- Tank is in very good condition.
Spitznas SDS Plus Pneumatic Rotary Hammer Drill ID: 1398259
Spitznas SDS Plus Pneumatic Rotary Hammer Drill
Qty: 2 Units
- Make: Spitznas
- Model: 2 2404 0030
- Type: SDS Plus
- Condition: Used, Reported in "Like New" Condition
- Hammer Drill Mode for Drilling Holes in Concrete, Brick and Masonry
- Rotary Drilling Mode for Straight Drilling of Steel and Wood
- Built-in Oiler for Air Motor
- Specifications:
- Blows/Minute (BPM): 0-3000 BPM
- Drill Speed (RPM): 0-625 RPM
- Power at 90 PSI: 0.7HP
- Air Consumption at 90 PSI: 21 CFM
- Tool System: SDS Plus
- Max Drilling Diameter (Solid Bit Drilling Concrete): 1in
- Max Drilling Diameter (Core Bit Drilling Concrete): 3in
- Max Drilling Diameter (Twist Drill Drilling Wood): 3/4in
- Dimensions: 16in x 8.5in x 4in
- Weight: 11 Lbs.
- Location: Central Canada
View More Miscellaneous Drills
CCS Pressure Switch ID: 1367430
CCS Pressure Switch
Model:695GEAJ3
Proof 3000 PSIG
DECR: 320 PSI
- Location: Savona, British Columbia, Canada
Toshiba G7 10 HP VFD ID: 170246
- Input
- 480 VAC
- 16.5 Amps
- 50/60 Hz
- Output
- 480 VAC
- 15 Amps
- 0 - 400 Hz
- Cat #: VT130G7U4110B
- Serial #: A070109882
- Quantity 1
View More 10 HP VFDs
Manufacturer: | TOSHIBA |
Westinghouse 2 Pole 20 Amp Bolt-On Breaker ID: 191322
- 240 VAC Max
- 2 Pole
- Bolt-on
- Type BA
- Quantity 1
View More 2 Pole 20 Amp Breakers
Manufacturer: | WESTINGHOUSE |
Falcon SB250 Centrifugal Gold Concentrator ID: 1381013
Falcon SB250 Centrifugal Gold Concentrator
- Make: Sepro Falcon
- Model: SB250
- Year: 2014
- Condition: Used, Reported in Very Good Condition
- Discharge: Automated
- Comes with Variable Speed Control and Electric Motor
- Recommended Solids Capacity: 1 - 10 TPH
- Approximate Max Slurry Capacity: 20m³/hr.
- Concentrating Surface Area: 0.17m²
- G-Force Range:
- Upper: 200 G's
- Lower: 50 G's
- Machine Weight: 269 kg
- Motor Power: 2.2kW (3.0HP)
- Process Water Consumption: 1.8-2.7 m³/hr.
- Continuous Water Supply Pressure: 2-3 bar
- Recommended Max Feed Particle Size: 2.0mm
- Absolute Max Feed Particle Size: 2.5mm
- Maximum Feed Percent Solids: 55-70%
- Concentrate Slurry Flush Volume: 50 Liters
- Concentrate Solids Flush Volume: 1,010cm³
- Dimensions:
- Width: 1.04m
- Length: 0.66m
- Height: 1.02m
- Location: Europe
View More Gold Concentrators
Model: | SB250 |
Year: | 2014 |
Eriez 72 in. x 72 in. Self Cleaning Cross Belt Magnets ID: 524767
- Model: SE7920A
- Style: SC-2
- Magnet Voltage: 230 DC
- 64 Amps
- 14,811 Watts
- Belt Width: 66 in.
- Magnet Dimensions: 72 in. x 72 in.
- Magnet Height: 36 ¾ in.
- Conveyor Length: 111 ½ in.
- 2 Units Available
- Location: Eastern Canada
View more Belt Magnets
Martin Engineering 16 in. x 28 in. Vibro Screener ID: 211489
- Model: CD18.910.
- Approximately 16" wide x 28" long screen.
- Stainless steel construction.
- Single deck on stand.
- .35 kw Vibro Motor:
- 230/460 volt vibro motor.
- Serial No.:974119.
View more Vibrating Pan Feeders
TMG 58 Breaker ID: 174355
- Model: TMG 58.
- Body weight: 155 kg.
- Operating pressure: 55 L/min.
- Impact frequency: 700 BPM.
- Product ID: JYNO.
Please contact us for more information.
View more Excavator Attachments
18in Dia. x 7ft Trommel Wash Plant ID: 1394383
18in Dia. x 7ft Trommel Wash Plant
Includes Trommel and Hopper/Feeder
- Trommel:
- Size: 18in Dia. x 7ft Long
- Capacity: 3 YPH
- Screen Area: 4.5ft Long
- Screen Spacing: 0.5in
- Sluice Under Trommel
- 14in Wide x 6.5ft Long
- With Carpeting
- Water Connection Sizes: 2in
- Drive: Electric Motor
- Power Output: 1 HP
- Frequency: 60Hz
- Phase: Single
- Overall Dimensions:
- Length: 11.5ft
- Width: 5.5ft
- Height: 6.5ft
- Hopper/Feeder
- Hopper Dimensions:
- Length: 4ft
- Width: 6.5ft
- Depth: 4ft
- Capacity: Approx. 3 Yards
- Grizzly Spacing: 3.5in
- Conveyor: 12in Wide x 17ft Long
- Drive: Electric Motor
- Power Output: 0.75HP
- Frequency: 60Hz
- Phase: Single
- Overall Dimensions:
- Length: 18ft
- Width: 7ft
- Height: 7ft 4in
- Hopper Dimensions:
- Location: Northwest USA
View More Trommels
Sala 2 ft Vertical Sump Pump ID: 142453
- Sala Vertical Sump Pump.
- Model: G-20-284-4.
- 4 in. discharge.
- Model: G-20-284-4.
Please contact us for more information.
Manufacturer: | SALA |
GOULD One-Time 2 AMP fuse ID: 360816
2 AMP
600V or less
Cat#: NRS2
Length: 5"
Maintenance/utility car. 16 feet long X 4 feet wide. On 24 in. track guage. Comes with 2 open comparments and 1 multible shelved comparment. All with hinged front doors. ID: 43795
Maintenance/utility car. 16 feet long X 4 feet wide. On 24 in. track guage. Comes with 2 open comparments and 1 multible shelved comparment. All with hinged front doors.
8x6 KSB GIW 150HP Slurry Pump ID: 1369080
8x6 KSB GIW 150HP Slurry Pump
- Make: KSB Georgia Iron Works
- Model: LCC-M150-500.3E AFM1
- DOM: April/May 2021
- Condition: New Surplus
- Style: Centrifugal Pump
- Type: Slurry Pump
- Size:
- Suction: 8in
- Discharge: 6in
- Flow Rate: 150HP Motor: 3,000 Gal/Min @ 160 Ft. (69 PSI)
- With Diverter Valve and Check Valve
View Spec Sheet Below - Drive: 150HP Electric Motor
- Make: Toshiba
- Model: 1504SDSR41A-PR
- Power: 150HP (112kW)
- RPM: 1785
- Voltage: 230/460 Volt
- Frequency: 60Hz
- Phase: 3-Phase
- VFD Included
- Location: Northwest Canada
View More Slurry Pumps
Square D 125 Amp Lighting Breaker Panel ID: 374216
- 240/120 Volt
- 24 Circuit
- Model/Series: Q0C24UC
- Push in Breaker Type
- 2 x 20 amp Single Pole Breakers
- 3 x 15 amp Single Pole Breakers
- Location: British Columbia, Canada
View more Breaker Panels
JKS-Boyles Winkie GW-15 Diamond Core Drill ID: 1396000
JKS-Boyles Winkie GW-15 Diamond Core Drill
- Make: JKS-Boyles
- Model: Winkie GW-15
- Type: Diamond Core Drill
- Style: Man Portable
- Condition: Used - Comes with Spare Engine
- General Model Specifications:
- Power Unit: Gasoline, 2-Cycle, Air Cooled Engine
- Output: 10HP @ 8400 RPM
- Transmission: Oil Bath Gear Shift Transmission
- Clutch: Centrifugal
- Unipress Hand Feed
- Max Bit Speed:
- Low Speed: 1200 RPM
- High Speed: 2800 RPM
- Weight:
- Drill: 85 lbs.
- Feed: 100 lbs.
- Power Unit: Gasoline, 2-Cycle, Air Cooled Engine
- Hole Depth Core Size: E-Core
- Core Barrel: E-Core Thin Kerf IAWS
- Core Diameter 1in (23mm)
- Hole Diameter 1-1.5in (38mm)
- Depth: 425-475ft (130-145m)
- Hole Depth Core Size: A-Core
- Core Barrel: A-Core Thin Kerf IAWS
- Core Diameter 1.39in (35.3mm)
- Hole Diameter 1.89in (48mm)
- Depth: 350-400ft (105-120m)
- View Spec Sheet Below
- Location: Eastern Canada
View More Diamond Core Drills
Rapid Span 80 ft. Timber Deck Steel Bridge ID: 969537
- Model: 10024
- Capacity: 100 Ton
- Dimensions
- 24.38 Meters Long (80 ft.)
- 14 ft. Wide
- Timber Deck Steel Temporary Bridge
- Modular Design for Easier Transport
- Year: 2015
- Location: Western Canada
View more Bridges
Godwin CD225 Automatic Self-Priming Pump ID: 157450
- Model: CD225.
- Trailer mounted 8 in. pump.
- Max. GPM: 3100 US (704 m³/hr).
- Max. head: 180 ft. (55 m).
- Capable of handling solids up to 3.2 in. (81 mm) diameter.
- John Deere 4045 engine.
- Hours: 252.
- Year: 2008.
Please contact us for more information.
View more Trash Pumps
Simco TR-4000 Track Drill ID: 1344008
Simco TR-4000 Track Drill
- Make: Simco
- Model: TR-4000
- Type: Rotary Drill
- Style: Track Mounted
- Serial: 8533996
- Condition: Well Maintained and Ready to Work
- Mainline Winch: KPL5-CC-WH05-1
- Uses 0.5in Wire Rope, 75ft Long
- Mast Height: 18ft
- Stroke: 11ft
- Ground Pressure: 4 PSI
- Drive: Deutz BF4L913 Diesel Engine
- Overall Dimensions:
- Length: 10ft
- Width: 7ft
- Weight: 15,000 Lbs. Loaded with Rod
- Location: Northwest USA
View More Rotary Drills