Wanted EquipmentFinancing - Apply now

Equipment Quotes

General Electric 600 HP Electric Motor ID: 877580


  • Voltage: 2300 Volt 
  • Horse Power: 600
  • RPM: 1800
  • Frame: 588US
  • Location: Eastern Canada

View more Electric Motors

Siemens 200 Amp Disconnect ID: 1414909


Siemens 200 Amp Disconnect

  • Make: Siemens
  • Model: ID364NF
  • Type: Disconnect
  • Style: Non-Fusible
  • Current Rating: 200 Amp
  • Voltage Rating: 600 Volt
  • Poles: 3-Pole
  • Enclosure: NEMA 1

  • Location: Savona, British Columbia, Canaday esta 

View More 200 Amp Disconnects

Bonfiglioli Speed Reducer Package ID: 147271


  • Speed Reducer Package.
    • Consists of:
      • Bonfiglioli Speed Reducer.
        • Model: VF185.
        • Ratio: 200:1.
      • Marathon 1 hp electric motor.
        • 230/460V.
        • 1,200 rpm.
          • 3 phase. 
          • 60 Hz.
        • Inverter duty.
    • Gearbox and motor never used since purchased NEW in 2009.

 

Please contact us for more information.

Aurora 411 BF Horizontal Split Case Pump ID: 145765


  • Type: 411 BF.
  • 5" X 6" X 17" Impeller.
    • 1200 GPM.
    • 192 ft/head.
    • Equipped with:
      • 100 hp electric motor.
        • 230/460V.
        • 1,800 rpm.
          • Frame: 404T.
        • Continuous duty.
  • 4 units available.

 

Please contact us for more information.

Square D 60 Amp Non-Fusible Disconnect ID: 1075144


Square D 60 Amp Non-Fusible Disconnect

  • Make: Square D
  • Type: Non-Fusible
  • Current: 60 Amp 
  • Voltage: 600 Volt 
  • NEMA 3R Enclosure 
  • Comes with Start/Stop Button in Door

  • Location: Savona, British Columbia, Canada

View more Disconnects

AMP-TRAP AJT40 ID: 992301


Amp-trap

ajt

40amp

time delay

General Electric 40 HP Motor ID: 155381


  • 460V.
  • 3,565 rpm.
    • 3 phase.
  • Frame: 324TS.

 

Please contact us for more information.

View more 40 HP Motors

. Ingersoll-Rand 1-P86 Pavement Breaker ID: 41839


  • Ingersoll-Rand Pavement Breaker.
  • Model 1-P86.
  • 1-1/8 in. Chuck.

Telsmith 2540 Jaw Crusher ID: 1200492


Telsmith 2540 Jaw Crusher

  • Make: Telsmith
  • Model: 2540 Pegson
  • Year: 2009
  • Condition: Operational, Repowered
  • Toggle: Single
  • Frame Style: Single Piece
  • Max Feed Size: 22in
  • Min/Max Discharge:
    • Min: 2.5in
    • Max: 7in
  • Max Capacity: Up To 217 Discharge (Up To 444 TPH@7in Discharge, Short Toggle)

  • Drive: 150HP Motor Included

  • Overall Dimensions:
    • Length: 107in
    • Width: 90.75in
    • Height: 89in
    • Weight: 35,515 Lbs.

  • Additional Information:
    • Jaw has been Repowered

  • Location: South America

View More Jaw Crushers

Perrin 30 in. x 30 in. Plate Filter ID: 70332


  • 11 - Lenser plate elements.
  • 10 - Lenser frame elements.
    • 2" Thick.
  • Approx. 6.6 cubic feet of cake volume.
  • Quincy series TH3 - 6 X 20 Hydraulic closing cylinder.
  • Air over hydraulic manual controls.

General Electric 600 Amp Breakers ID: 160008


  • 600 Amp frame.
  • Adjustable trip.
  • Quantity: 3.

 

Please contact us for more information.

View more 600 Amp Breakers

Manufacturer:GENERAL ELECTRIC

2008 Stamford 300 kW Gen Ends ID: 223799


  • Frame/Core: HCI434E1L-0080E.
  • KVA Base Rate: 375.
  • kW Base Rate: 300.
  • Hz: 60.
  • RPM: 1800.
  • Volts: 480.
  • Ph: 3.
  • Amps Base Rate: 451.
  • PF: 0.8.
  • Rating: Continuous.
  • Volts: 40.
  • Ex Amps: 2.00.
  • Ambient Temp C: 40.
  • Enclosure: IP22.
  • Insulation Class: H:UL1446.
  • Quantity: 4.
  • Location: Central U.S.A.

 View more 300 kW Generators

Manufacturer:Stamford

Caterpillar 14M Motor Grader ID: 196879


  • Engine:
    • Make Caterpillar.
    • Model C11 ACERT VHP.
    • Net Power Gear 1-2 259 hp/193 kw.
    • Net Power Gear 3-4 274 hp/204 kw.
    • Power Measured @: 1800 rpm.
    • Net Power Gear 5-6: 274 hp/204 kw.
    • Number of Cylinders: 6.
    • Net Power Gears 7-8: 274 hp/204.3 kw.
    • Max Power: 274 hp/204.3 kw.
    • Displacement: 677 cu in/11.1 L.
  • Operational:
    • Front Axle Std Operation Weight: 12611 lb/5720 kg.
    • Rear Axle Std Operation Weight: 34522 lb/15659 kg.
    • Total Std Operation Weight: 47133 lb/21379 kg.
    • Front Axle Max Operation Weight: 21912 lb/9939 kg.
    • Rear Axle Max Operation Weight: 44086 lb/19997 kg.
    • Total Max Operation Weight: 65998 lb 29936 kg.
    • Fuel Capacity: 130 gal/492 L.
    • Cooling System Fluid Capacity: 12.3 gal/46.5 L.
    • Hydrauilc System Fluid Capacity: 15.9 gal/60 L.
    • Transmission Fluid Capacity: 23.5 gal/89 L.
    • Circle Gearbox Fluid Capacity: 1.6 gal/6 L.
    • Tandem Case Fluid Capacity (each): 25.5 gal/96.5 L.
  • Transmission:
    • Type: direct drive, power shift, countershaft.
    • Number of Forward Gears: 8.
    • Number of Reverse Gears: 6.
    • Max Forward Speed: 31 mph/49.8 km/h.
    • Max Reverse Speed: 24.5 mph/39.4 km/h.
  • Steering:
    • Articulation L/R: 20 degrees.
    • Turning Radius: 25.9 ft in/7.9 m.
  • Front Axle:
    • Wheel Lean: 17.1 degrees.
    • Oscillation: Total 32 degrees.
  • Hydraulic System:
    • Pump Type: variable displacement.
    • Pump Flow: 74 gal/min;280 L/min.
    • Relief Valve Pressure: 3500 psi/24150 kPa.
  • Moldboard:
    • Moldboard Width: 14 ft in/4267 mm.
    • Moldboard Height: 27 in/688 mm.
    • Moldboard Thickness: 1 in/25 mm.
    • Max Depth of Cut: 17.3 in/438 mm.
    • Left Side Shift: 29.1 in/740 mm.
    • Right Side Shift: 31.1 in/790 mm.
    • Blade Pull at Max Weight: 39678 lb/17997 kg.
    • Blade Down Pressure: 38666.9 lb/17539 kg.
  • Circle:
    • Diameter: 71.8 in/1822 mm.
    • Shift Left: 25.5 in/650 mm.
    • Shift Right: 20.5 in/520 mm.
    • Max Reach Outside Tires: Left 85.4 in/2169 mm.
    • Max Reach Outside Tires: Right 89.7 in/2279 mm.
    • Max Lift Above Ground: 16.5 in/419 mm.
    • Front Blade Tip Angle: 40 degrees.
    • Reart Blade Tip Angle: 5 degrees.
  • Dimensions:
    • Height to Top of Cab: 11.6 ft in/3535 mm.
    • Overall Length: 30.9 ft in/9412 mm.
    • Width Over Tires: 9.2 ft in/2791 mm.
    • Wheelbase: 21.5 ft in/6559 mm.
    • Blade Base: 9.3 ft in/2842 mm.
    • Tandem Axle Wheelbase: 5.4 ft in/1656 mm.
    • Rear Ground Clearance: 1.3 ft in/383 mm.
  • 7 shank ripper blade.
  • 4 shanks fitted.
  • Full ROPS cab.
  • Hours: 9700.

View more Graders

Manufacturer:CATERPILLAR

Hayward Gordon HRFX-30-612 Mixers ID: 1045963


  • Model: HRFX-30-612
  • Shaft Length: 72 in. Long 
  • High-Shear Radial Flow Impeller: 24 in. Dia.  
  • Teco Westinghouse 3 HP Motor 
    • Voltage: 460 
    • RPM: 755
    • Frame: 182T
    • 3 Phase 
    • 60 Hz
  • Sew-Eurodrive Gearbox 
    • Type: RF67 AM182
    • 1750/152 RPM 
    • 11.54:1 Ratio 
  • Complete with Vibraswitch Malfunction Detector Switch 
    • Model: 366

  • Location: British Columbia, Canada

View more Mixers

CG Thermal SCI Ceramic Heat Exchanger ID: 969617


  • Rack of 6 Heat Exchangers 
  • Max Working Pressure (PSI): Process 75 Service 75
  • Max Working Temp (F°): Process 300 Service 300
  • Hydro Test Pressure (PSI): Process 98 Service 98
  • Cylinder Length: 43 in. 
  • Top Leach Out has 2 in. Butterfly Vales on each Heat Exchanger 
  • 2 in. Butterfly Vales
    • Qty: 6
    • Model: 200DJLE
    • Flange: ASME 150
    • Disc: D1
    • Seat: EPDME
  • Water Out has 4 in. Butterfly Valve
  • 4 in. Butterfly Valves
    • Qty: 1
    • Brand: KITZ
    • Model: 200DJL
    • Flange: ASME 150
    • Disc: D1
    • Seat: BUNA
  • Water Out Port has 2 in. Butterfly Valves on each Heat Exchanger 
  • 2 in. Butterfly Valves
    • Qty: 6
    • Model: 200DJLE
    • Flange: ASME 150
    • Disc: DI
    • Seat: EPDME
  • Leach in Bottom has 4 in. Butterfly Valve
  • 4 in. Butterfly Vales 
    • Qty: 1
    • Brand: KITZ
    • Model: 200DJ 
    • Flange: ASME 150
    • Disc: S1
    • Seat:  BUNA
  • Location: British Columbia, Canada

View more Heat Exchangers

Yale Midget King 1000 lb Chain Hoist ID: 63742


  • Roller type.
  • 1000 lb capacity.
  • Hook mount.
  • Model: 1/2K17FMG3.
  • 440 volt, 3 phase electric motor.

Allen-Bradley 700-F310A1 Industrial Contactor ID: 622818


Cat No: 700-F310A1

Series: B

600 Amp

   Volts AC     |    Make    |    Break   

120-600           7200VA      720VA

72-120                 60A       720VA

24-72                   60A           10A

   Volts DC   |    Make/Break

    46-300            138VA    

      5-46                3.0A

RMS Ross Derocker ID: 98432


  • Model 10 x 20.
  • Electric hydraulic drive.
  • 15 hp, 230/460V electric motor.
  • Spray bars.

 

 

Revo Actuator ID: 468597


  • 24 DC Festo Actuator 
    • Model: RD70060050R0000
  • Center Line 2 in. Butterfly Valve
    • Model: AHBD5BDF
  • Qty: 3
  • Location: British Columbia, Canada

View more Actuators

Soilmec R518 Drill ID: 184383


  • Carrier: Crawler type undercarriage with expandable tracks.
  • Undercarriage:
    • Length: 18 ft. (5350 mm).
    • Width: 14 ft. (4600 mm) (extended).
  • Operating weight: 120,000-130,000 lbs (60-65 ton class).
  • Torque: 126,000 lb/ft. (172 kNm).
  • Depth: 118 ft. (36 m).
  • Max. diameter: 6 ft. (1800 mm).
  • Optimal diameter: 36 in. - 60 in. (914 mm - 1524 mm).
  • Crowd pressure: 43,800 lb/ft. (195 kN).
  • Tower height: 70 ft. (21.2 m).
  • Year: 1998. 

View more Quarry Drills

 

Klockner Moeller 22 DIL M Contactor ID: 1061809


Cat No: DIL 0A M

600v AC Max

35 Amps Max

 

Used Wilden M-8 Diaphragm Pumps ID: 42909


Used Wilden M-8 Diaphragm Pumps

View Spec Sheet Below

ADM 3 Silo Package ID: 239153


  • ADM 820 Ton Asphalt Storage System
  • Two ADM 280 Ton Silos
  • One ADM 260 Ton Silos with:
    • Weigh Batcher
    • Insulated
    • Oil Heated
  • Steel Cover Top Platforms
  • Checker Plated for Anti-Skid
  • Top Mounted 6 Ton Anti Segregation Batchers
  • Oil Heated Cones with:
    • Electrical Heated Double Gate
  • High Low Bindicators for Material Level
  • Each Silo Equipped with:
    • Bottom Safety Gates
  • Cone Bottoms Recently Rebuilt with:
    • Ni-Hard Steel Wear Plates
  • Cones Recently Rebuilt with:
    • AR Plate up to Silo Sides
  • 96' x 42" Main Drag Slat Conveyor with:
    • 125HP Motor
    • Gear Reducer
    • Not heated
  • Drag Conveyor Rated at 600 TPH
  • Material Reject Chute oil Heated on Sub-Floors
  • Twin 4" Pitch Roller Chains
  • Stairs with:
    • Handrails on Both Sides of Drag Conveyor
  • Top Platform for Maintenance
  • Main Slat Conveyor had Recent Comlete Rebuild Including:
    • Floor
    • Idlers
    • Head and Tail Sprockets along with Chains and Slats
  • Twin Transfer Drag Conveyors with:
    • 34" Wide Slats for Charging
  • Overall condition, Excellent
  • Package has been Disassembled
  • Location: Western USA

View more Silos

Edward Spiral Concentrator ID: 1398365


Edward Spiral Concentrator

  • Make: Edward 
  • Type: Spiral Concentrator
  • Construction: Fiberglass
  • Liner: Rubber Lined
  • Turns: 10 Turns
    • Turn Depth: 4in
  • Inlets: 2 Inlets - 2in
  • Outlets: 3 Outlets
    • 1 @ 3.25in
    • 2 @ 1.5in

  • Overall Dimensions:
    • Diameter: 24in
    • Height: 130in

  • Location: Savona, British Columbia, Canada

View More Spiral Concentrators

Leeson 1/4 hp Electric Motor ID: 143351


  • 208-230/460V.
  • 1725/1425 rpm.
    • 3 phase.
    • 50/60 Hz.

 

Please contact us for more information.

Manufacturer:LEESON

1999 Travco 8 Man Sleep Unit ID: 174230


 

  • 12 ft. wide
  • 65 ft. long
  • New Beds
  • New Bathroom
  • New kitchen
  • Air conditioner

Rosemount Exia Pressure Transmitter ID: 1071067


Type: C115-1DP33J12M1B1C6

Cal: 0-20 IN H20

Output: 4-20MA

Supply: 45VDC Max

Max W.P.: 2000PSIG

Canadian General Electric 1000 HP Motor ID: 305917


  • Model: EN-138933
  • Type: K
  • Frame: 1332
  • Volts: 4000
  • Amp: 130
  • RPM: 3570
  • 60 Hz
  • 3 Phase
  • Location: Western Canada

View more Electric Motors

Caterpillar 740 Articulated Rock Truck ID: 148937


  • CAT Articulated Rock Truck.
    • Year: 2008.
      • Model: 740.
        • Hours: 10,800.
    • Equipped with:
      • Caterpillar C15 ACERT technology engine.
        • 464 hp.
        • 1,700 rpm.
        • 6 cylinder.
        • Turbocharged.
      • 9 speed transmission.
        • Forward gears: 7.
        • Reverse gears: 2.
        • Maximum speed: 34 mph (54.7 km/h).
      • Dump & operational specs.
        • Rated payload: 83,775 lbs / 38,000 kg.
        • Capacity:
          • Struck: 22.8 yd³.
          • Heaped: 30 yd³.
      • Tire size: 29.6R25.
    • Please see the specs tab below for more detailed information.

 

  • Shipping information:
    • Dimenisions (L x W x H):
      • 35.7 ft x 11.3 ft. x 12.3 ft.
      • 10.88 m x 3.44 m x 3.75 m.
    • Weight: 
      • 72,400 lbs / 32,840 kg.

 

Please contact us for more information.

ITE (BlueLine) 2 Pole 40 Amp Push-in Breaker ID: 166308


  • 120-240 VAC
  • 2 Pole
  • Push-in
  • Quantity 4

 

View More 40 Amp Breakers

Ore Kinetics CoronaStat Electrostatic Separator ID: 1408121


Ore Kinetics CoronaStat Electrostatic Separator 

  • Make: Ore Kinetics
  • Type: Electrostatic Separator
  • Model: CS-LAB-1
  • Condition: Used
  • Voltage: 30kV
  • Feed Hopper: 
    • Length: 3in
    • Width: 4.5in
    • Depth: 7in
  • Drum: 
    • Diameter: 12in Dia.
    • Width: 8in
  • Drive: 0.37kW Gearhead Motor
  • Commander SE Vari-speed Controller
  • Adjustable Separation
  • 5 Collection Drawers/Trays
  • Ore Kinetics Electrical Control Panel
  • Overall Dimensions: 
    • Length: 2.5ft
    • Width: 2ft
    • Height: 4ft
  • Location: Savona, British Columbia, Canada

View More Laboratory Equipment

Allen Bradley 550 Volt Size 1 Coil ID: 176671


  • 550 VAC @ 60 Hz
  • Cat #: 71A16
  • Quantity 1

 

View More Size 1 Coils

Manufacturer:ALLEN BRADLEY

3000 Gallon Stainless Steel Tanks ID: 393132


  • Capacity: 3000 Gallon
  • Length: 120 in.
  • Internal Diameter: 87 in.
  • Height: 10 ft.
  • Heat Insulated
  • 1 Unit Available
  • Location: Eastern Canada

View more Steel Tanks

Caloritech 30kW Forced Air Heater ID: 119915


  • Caloritech 30 kW Forced Air Heater.
    • 10 available.
      • Model: GE30A5CM.
        • 102360 BTU/hr.
        • 1500 cfm.
        • 43 m³/minute.
      • 600V, 3 phase.
  • Shipping information:
    • Dimensions (L x W x H):
      • 22 in. x 24 in. x 20 in.
      • 56 cm x 61 cm x 51 cm.
    • Weight:
      • 100 lbs / 45 kg.

Please contact us for more information

View More Industrial Heaters

General Electric 600 Volt 8000 Line MCC Section ID: 156964


  • 600A vertical.
  • 600A horizontal.
  • Bucket 1:
    • GE size 3 starter - 120 coil.
    • Overload: 123F467B.
    • GE 100A breaker - adjustable trip.
  • Bucket 2 & 4:
    • GE size 2 starter - 120 coil.
    • Overload = C21.4B.
    • 100VA control transformer - 600/120V.
    • GE 50A breaker - adjustable trip.
  • Buckets 3: 
    • GE size 1 starter - 120 coil.
    • Overload: C6.30A.
    • 100VA control transformer - 600/120V.
    • GE 7A breaker - adjustable trip.
  • Bucket 5:
    • GE size 1 starter - 120 coil.
    • Overload: C1.96A.
    • 100VA control transformer - 600/120V.
    • GE 7 amp breaker - adjustable trip.
  • Dimensions (Single section) L x W x H:
    • 20 in. x 20 in. x 94 in.
    • 51 cm x 51 cm x 239 cm.

Please contact us for more information

View our full inventory of MCC Sections.

 

Manufacturer:GENERAL ELECTRIC

Electrical MCC Panels - please inquire with your needs. ID: 45958


  • Electrical MCC Panels -
  • Please inquire with your needs
  • Custom built MCC panels to meet your project requirements

2000 Monaco Executive Coach. ID: 44480


  • 2000 Monaco Executive Coach.
  • 42 ft. Long.
  • 78,000 KM.
  • 500 HP Cummins Turbo Diesel.
  • Allison 6 Speed Electric Shift Transmission.
  • 10,000 Watt Generator.
  • New Batteries.
  • New Front Tires.
  • New Front Air Conditioning.
  • Complete with Blue Ox Tow Package and 2008 Chevy HHR Wagon.

General Electric 3 Pole 125 Amp Breaker ID: 162947


  • 600 VAC
  • 3 Phase
  • Quantity 1

 

View More 125 Amp Breakers

Manufacturer:GENERAL ELECTRIC

Caterpillar 1600 kW 600 Volt Diesel Generator ID: 892445


  • Model: 3516-DITA
  • 1600 kW Primer Power
    • 2000 kVA
  • 600 Volt 
    • 60 Hz
  • +/- 3000 hrs
  • Complete with Muffler 
  • Location: Eastern Canada

View more Diesel Generators

Durcometer Chemical Pump ID: 144235


  • Durcometer Chemical Pump.
    • Feed: A.
    • Material Code: PAC11CA1.
    • 1 - 1.4 in. plunger. 
      • Max. 25 GPH.
      • 260 PSIG.
    • Equipped with:
      • Electric motor.
        • 208-230V.
        • 1,750/1,425 rpm.
          • 3 phase.

 

Please contact us for more information.

Westinghouse 3 Pole 125 Amp Panel Main Breaker ID: 191859


  • 240 VAC Max
  • 3 Pole
  • Cat #: CA3125X
  • Quantity 1

View More 3 Pole 125 Amp Breakers

Manufacturer:WESTINGHOUSE

2008 Zinex A5 Truck-Mounted Diamond Drill ID: 1338990


2008 Zinex A5 Truck-Mounted Diamond Drill

  • Make: Zinex
  • Model: A5
  • Type: Diamond Core Drill
  • Year: 2008
  • Hours: Approx. 6,000 Hours on Rig Since New
  • Condition: Used, Reported in Good Condition. Recently Drilled 3,300 Meters NQ
  • Mounted on Freight Liner Diesel Truck
    • Fright-Liner has 237,000 Miles
    • Engine: 5.9 Liter Cummins Diesel
  • Drill Engine: CAT 6.6 ACERT Tier 4 Engine:
    • Rated 174 HP Computer Controlled, Variable HP
  • Includes:
  • 12HH Chuck
    • H and H Chuck Jaws
  • Drill Comes with a Pratazolli Model KF40 High Pressure Injection Pump
    • 40GPM/1,100PSI
  • Rig is Equipped with a Slide Angle Mast to Drill from Vertical to Horizontal
  • Comes with Tripping Auxiliary Winch to Handle Drill Head, High Speed Wireline Winch
  • Drill Rod Tripping Done with Hydraulic Pullback Drill Head
  • Compact Water Swivel
  • Two Spare New Hydraulic Motors
    • (One Each for Wireline Hoist and Pratazoli Water Pump)
  • Skid Mount for Zinex A5 Available
  • Spares & Parts:
    • Guide Bushings for N and H Rod
    • Added Safety Railing
    • Hydraulic Filters
    • Engine Oil Filters
    • Rebuilt Kits for Chucks and Rod Holders
    • Mast Roller
    • Spare Chain and Sprockets for Wire Line
    • Miscellaneous Parts

  • Location: Savona, British Columbia, Canada

View More Diamond Core Drills

Paul O. Abbe 3 ft. x 8 ft. Ball Mill ID: 226939


  • Carbon steel construction.
  • 36 in. diameter.
  • 96 in. long jacketed chamber.
  • Internal lifter bars.
  • Jacket rate 14 psi with rotary union.
  • Outboard roller bearings.
  • 20 hp motor.
    • Volts: 230/460.
    • RPM: 1755.
  • Belt driven through Falk gear reducer.
    • Ratio: 25.4:1
  • Location: Eastern, U.S.A.
  • Contact for more information.

 

View more Batch Mills

Manufacturer:PAUL O. ABBE

HBR 609 Drilling Rig ID: 207643


  • Engine Power: 190 kW.
  • Width of crawler: 2480 mm. / 8.14 ft.
  • Mast
    • Stroke of rotary head: 4950 mm / 16.24 ft.
    • Extraction force: 100 kN.
    • Crowd force: 100 kN. 
  • Clamps:
    • Diameters: 68 ÷ 254 mm / 2.7 in. ÷ 10 in. 
  • Rotary Head:       
    • Torque: 6,3 kNm / 4646.6 lbf.ft.
    • Speed range: 80 rpm.
    • Weight: 22000 kg / 48502 lbs. 

View more Air Track Drills

Manufacturer:HÜTTE BOHRTECHNIK

2014 Caterpillar 242D Skid Steer ID: 236706


  • OROPS
  • Single Speed
  • Proportional Standard Flow Hydraulics
  • Hours: 1957
  • Location: Southern USA

View more Skid Steers

24 in. Wide x 8 ft. Long Stainless Steel Dewatering Conveyor ID: 572551


  • Dimensions: 24 in. Wide x 8 ft. Long 
  • Gearhead Motor Drive
  • Comes with 
    • Seperate Powered Discharge Belt 
    • Control Panel
  • Location: British Columbia, Canada

View more Stainless Steel Conveyors

Siemens 2 Pole 100 Amp Push-in Breaker ID: 164707


  • 120-240 VAC
  • 2 Pole 
  • Type: Q
  • Push-in
  • Quantity 3

 

View More 100 Amp Breakers

Manufacturer:SIEMENS
Browse Equipment Remove AllSubmit Quote
First Name
Last Name
Email Address
Phone
Questions, Information and Comments
Project Location

Additional Information

Additional information is helpful to make sure we provide you with the best service possible. However it is not required

Company
Address
City
Country
State / Province
ZIP Code
Website
Ore / Material
Tons Per Hour