Equipment Quotes
Positive Displacement Pump. Model: C6DB-137. ID: 44183
- IMO Three Screw Pump
- Series 6
- Model: C6DB-137.
- Output Pressure:
- 1500 PSI
- 103 BAR
- Capacity Range:
- 7 - 28 GPM
- Speed Range:
- 1150 - 3500 RPM
- 2 Units Available
- Location: BC Canada.
Wemco 190 Flotation Mechanisms ID: 83479
- 1500 Cu Ft Cells.
- Guarding included.
- Spare shaft & bridge assembly.
- 2 units available.
Midwest 4CT18 ID: 1075444
Type: 4CT18
800:5
Current Transformer
2VA
Cycles: 25-400
11.5 Cubic meter Membrane Filter Press for Sale ID: 51213
- 11.5 cubic meter membrane filter press.
- New and unused.
- 110 plates made with 100 percent virgin polypropylene.
- Dual feed and dual cylinder.
- Max feed pressure of 300 PSI.
- Unit can cycle up to four times per hour.
- Mine duty construction.
- Auto plate shifting and core blow.
- 4 corner filtrate collection and side tapped with stainless filtrate collection troughs.
Universal 16ft. Chain Bucket Elevator ID: 402853
- Model: U1
- Dodge Shaft Mounted Reducer
- Class I Operation
- 3 Phase
- 60 Hz
- 230/460 Volt
- TEFC
- Premium Efficiency
- Spout Hopper
- Narrow Inlet
- 6in. x 4in. 18 Gauge Steel Buckets
- Location: Eastern USA
View more Bucket Elevators
15ft³ Pug Mixer ID: 1234161
15 Cubic Foot Pug Mixer
- Make: Crossman Machinery Company
- Type: Pug Mill
- Size: 2ft x 2ft x 5ft Wide Open Top Mixer
- Heavy Duty Mixer Shaft and Paddles
- Chain Driven through a Right Angle Reducer and Electric Motor
- Mounted 3.5ft High Legs
- With Manual Slide Discharge Gate
- Location: Savona, British Columbia, Canada
View More Various Cement Equipment
Montabert H-70 Hydraulic Drifter Drill ID: 705339
- Shank: 7/8 in. x 108 mm
- Weight: 40 kg
- Length: 585 mm
- Profile Height from Rod Center: 56 mm
- Rotation Rate: 0- 350 RPM Independent, Reversible Rotation
- Impact Rate: 80 Hz @ 150 Bar
- Rotation Torque: 90 Nm @ 120 Bar
- Hydraulic Requirements
- Percussion Pressure: 120 - 150 Bar
- Oil Flow: 60 - 70 L/Min @ 120 - 150 Bar
- Viscosity: Range: 60 - 30 CST
- Air Flushing:
- Air Consumption: 600 - 950 L/Min @3/5 Bar
- Relief Valve Set: 7 Bar
- Shank Lubrication: Standard
- Water Flushing:
- Water Consumption: 5 - 10 L/min
- Water Pressure: 2 - 6 Bar
- Air Consumption: 200 - 300 L/Min @ 3-5 Bar
- Flushing Pipe Diameter: 5 mm
- Location: British Columbia, Canada
View more Drifter Drills
JLG 1255 Zoom Boom ID: 1005749
- Model: 1255
- Hours: 3662
- Year: 2015
- Fuel Type: Diesel
- Cab: Heat & AC
- Carriage Width: 72 in.
- Forks: 72 in. Pallet
- Tires: Foam Filled
- Location: Eastern USA
View more Zoom Booms
Caterpillar 416C Loader Backhoe ID: 123315
- Caterpillar 416C Loader Backhoe.
- Year: 1997.
- Hours: 11693.
- Comes with:
- Extendahoe.
- 24 in. digging bucket.
- Clean up bucket.
- Also available.
- Ditching bucket.
- Frost bucket.
Please contact us for more information.
Manufacturer: | CATERPILLAR |
2016 Sandvik LH204 Scooptram ID: 1424352
2016 Sandvik LH204 Scooptram
- Make: Sandvik
- Model: LH204
- Year: 2016
- Hours: 3,644 Hours
- Condition: Used, Reported in Good Condition
- Canopy: ROPS/FOPS
- General Model Specifications:
- Capacities:
- Tramming Capacity: 4,000kg (8,820lbs)
- Tipping Load: 10,350kg (22,800lbs)
- Standard Bucket: 2.0m³ (2.6yd³)
- Engine: Deutz BF4M2012C Diesel Engine
- Power Output: 95kW (125HP) @2,500RPM
- Torque: 445Nm @1,500RPM
- Cylinders: 4, Inline
- Displacement: 4.04L (247in³)
- Bucket Motion Times:
- Raising Time: 4.8 Seconds
- Lowering Time: 3.4 Seconds
- Dumping Time: 3.9 Seconds
- Turning Radius:
- Turning Angle: 42°
- Inner: 2,886mm (114in)
- Outer: 5,153mm (203in)
- Overall Dimensions:
- Length: 7,766mm (306in)
- Width: 1,600mm (63in)
- Height with Canopy: 2,127mm (84in)
- Weight: 13,950kg
- Capacities:
- Can have Ejector Bucket Installed for Additional Cost
- Location: Western Canada
View More Scooptrams
Volvo 417 kW 400 Volt Diesel Generator ID: 1053308
- Voltage: 400 Volt
- Hours: 614
- Volvo Engine
- Model: TAD1631GE
- Marelli Alternator
- 1500 RPM
- 50 Hz
- Skid Mounted
- Radiator Cooled
- Electronic Governor
- Base Fuel Tank
- Water Jacket Heater
- Free Standing Auto Start Control Panel
- Location: Europe
View more Generators
Asian Test Equipment TRS-DN Hardness Tester ID: 1416152
Asian Test Equipment TRS-DN Hardness Tester
- Make: Asian Test Equipment
- Model: TRS-DN
- Type: Rockwell Hardness Tester
- Year: 2021
- Condition: Used, Reported in Good Condition
- Test Loads (kgf): 60, 100, 150 (Rockwell)
- Initial Loads (kgf): 10
- Max Test Height: 290mm
- Depth of Throat: 133mm
- Load Control: Automatic (Loading, Dwell, Unloading)
- Dwell Time: 1-99 (Selectable)
- Overall Dimensions: (Approx.)
- Length: 610mm
- Width: 173mm
- Height: 705mm
- Weight: 100kg
- Location: Western Canada
View More Laboratory Equipment
Baldor 60 HP Super-E Motor ID: 158069
- 230/460V.
- 3 phase.
- 60 Hz.
- 1780 rpm.
- 138/69A.
- Frame: 364T.
- Enclosure: TEFC.
Please contact us for more information.
View more 60 HP Motors
Manufacturer: | BALDOR |
Allen Bradley 2100 Series 24" Fused Bucket ID: 187037
- 480/600 VAC
- 3 Phase
- 24" Height
- Fusible
- Door Included
- Will Install Electrical Components Into Bucket According to Customer's Needs
- Quantity 12
View More MCC Buckets
Manufacturer: | ALLIED |
Tadano 25 Ton Rough Terrain Crane ID: 921755
- Model: TR250M-6
- Capacity: 25 Ton
- Year: 1997
- KM: 48,429 KM
- Hours: 8,410
- Location: Japan
View more Cranes
Labconco Biosafety HEPA Fume Hood 3450000 ID: 222640
- 5 ft. purifier logic class II.
- Type A2 Biological safety cabinet with 10 in. sash opening.
- Protection type: Product and personnel.
- Conformance: ADA, ETL, NSF 49, UL.
- Exhaust volume : 420-462 CFM.
- Lighting : Fluorescent.
- Electrical : 115 volts, 60 Hz, 12 amps
- Weight : 715 lbs. (324 kg)
- Dimensions : 66.3 in. Wide, 31.2 in. Deep, 61.4 in. high
- Location: Western Canada
- Contact us for more information.
View more Fume Hoods
Hydraulic Rams ID: 1279453
Hydraulic Rams
Quantity: 2 Units
- Ram #1
- Main Housing: 12in Diameter x 88in Long
- Main Chrome Shaft: 6in Diameter
- Approx. 80in Stroke
- Main Bushing Hole: 4 3/8in Diameter (4.375in)
- Ram #2
- Main Housing: 9in Diameter x 79in Long
- Main Chrome Shaft: 4.5in Diameter
- Top Bushing Hole: 4in Diameter
- Bottom Bushing Hole: 4in Diameter
- Approx. 71in Stroke
- Location: Savona, British Columbia, Canada
View More Hydraulic Cylinders
250kW Cummins Diesel Generator ID: 1414113
250kW Cummins Diesel Generator
- Make: Cummins
- Model: 250DFAC
- Condition: Good Used Condition
- Hours: 942.2 Hours
- Duty: Standby
- Fuel: Diesel
- Stationary/Portable: Stationary - Skid Mounted
- Engine: Cummins Diesel Engine
- Model LTA10-G1 (380HP@1800RPM)
- Year: 1992
- Oil: Capacity - 36 Liters (38 Qts.)
- Radiator: Air to Air, Coolant Capacity- 49.2 Liter (13 US Gal)
- Generator:
- kVA/kW: 250kW (312.5kVA)
- RPM: 1800 RPM
- Voltage: 480 Volt - Reconfigurable
- Available 3-Phase Voltages - Amperages
- 120/208 Volt - 868 Amps
- 127/220 Volt - 820 Amps
- 139/240 Volt - 752 Amps
- 120/240 Volt - 753 Amps
- 240/416 Volt - 434 Amps
- 254/440 Volt - 410 Amps
- 277/480 Volt - 376 Amps
- 220/380 Volt - 476 Amps
- Available 3-Phase Voltages - Amperages
- Frequency: 60Hz
- Phase: 3-Phase
- Power Factor: 0.8
- Output Panel: Analog Control Panel
- Additional Information:
- Transfer Switch
- Enclosed
- Prior Municipal Unit
- Needs Replacement Fuel Tank
- Location: Eastern USA
View More 201-300kW Diesel Generators
Arktite AR1042 100Amp 3W 4P Wall Mount Plug Housing ID: 990413
Arktite AR1042
100Amp
3w 4p
wall mount housing (no guts)
Steel 3 inch Channel ID: 78146
- 3 inches deep.
- 3/16 inch web.
- 20 ft. lengths.
- Please inquire for additional information.
Schneider Electric Multi Distribution Switchboard ID: 222823
- Model: MDS 19382 + 19383.
- S/N: 34111201-001.
- Condition: New .
- PANEL 1.
- 600 amps.
- 600 volts, 3-phase.
- Incoming via cable.
- PANEL 2.
- 1 x 600 amp MGF3660 PowerPact breaker.
- 1 x 200 amp JDA36200 PowerPact breaker.
- 1 x 250 amp JLA36250 PowerPact breaker.
- 2 x 150 amp HJA36150 PowerPact breakers.
- 2 x 100 amp FH36100 I-Line breakers.
- 1 x 60 amp FH36060 I-Line breaker.
- 1 x 40 amp FH36040 I-Line breaker.
- Location: Western Canada.
- Contact for more information.
View more 600 Amp Breaker Panels.
Manufacturer: | SCHNEIDER |
General Electric 250 VA Control Transformer ID: 618251
250 VA
Cat No: 61G19
EN: 66351
CYC: 60
460V
115V
All-Fill Sanitary 6 in x 8 ft Screw Feeder ID: 212035
- Inclined portable style.
- Stainless steel construction.
- Food grade.
- All welds continuous and ground smooth.
- Includes bridge breaker.
- Clean-out port on bottom.
- Manual hydraulic jack for variable height adjustment.
- Removable cover and bearing end plate on trough.
- Leeson 1/2 HP electric motor.
- 208-230/460V.
- 1,725 rpm.
- 3 phase.
- Continuous duty.
Please contact us for more information.
View more Screw Feeders
1 in Minus Grinding Balls ID: 175418
- 1 bin available.
- 46 in. deep.
- 49 in. wide.
- 18 in. high.
- Approx. 6500 lbs.
View more Grinding Media
New Tricone Drill Bits ID: 451055
- Size: 4 1/8 in.
- IADC: 231
- Quantity: 14
- Location: Southern USA
View more Drill Parts & Accessories