Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Cedarapids 24 inch X 16 inch roll crusher. ID: 47943
- Cedarapids 24 inch X 16 inch roll crusher.
- On stand with electric drive motor.
Westinghouse 3 Pole 150 Amp FDB Breaker ID: 191841
- 600 VAC
- 250 VDC
- 3 Pole
- Cat #: FDB3150
- Quantity 1
View More 3 Pole 150 Amp Breakers
WEG 5HP Electric Motor and Reducer ID: 1392830
WEG 5HP Electric Motor and Reducer
- Make: WEG Motors Ltd.
- Model: 184T 1269
- Condition: Used
- Power Output: 5HP
- Speed: 1740 RPM
- Voltage: 575 Volt
- Current: 4.8 Amps
- Frequency: 60Hz
- Frame: 184T
- Reducer: David Brown Radicon
- Series: AU500-8
- Ratio: 30-1
- Output: 58 RPM
- Location: Savona, British Columbia, Canada
View More 5HP AC Motors
Gould 2 Amp Fuse ID: 188492
- 600 VAC
- Class C
- Cat #: FES2
- Style: Bolt-On, or Ferrule
- Length: 2.25" Ferrule, 3.375" Bolt-On
- Quantity 46
View More 2 Amp Fuses
Manufacturer: | GOULDS |
2010 JLG 600AJ Articulating Boom Lift ID: 195445
- Platform Height: 60 ft 7 in. / 18.47 m.
- Platform Capacity- Unrestricted: 500 lb / 226.80 kg.
- Horizontal Reach: 39 ft 9 in. / 12.12 m.
- Basket: 8 ft. wide with side entry.
- Auxiliary Power: 12 Volts DC.
- Capacity- Fuel Tank: 30 gal. / 113.56 L.
- Enginer Type- Diesel: DEUTZ TD 2.9L Tier 4 Final 67 hp.
- Axle Oscillation: 8 in. / 0.2 m.
- Drive speed - 4WD: 4.25 mph / 6.84 km/h.
- Gradeability - 4WD: 45%.
- Swing: 360 Degrees.
- Swing Type: Continuous.
- Turning Radius- Outside (4WS): 11 ft 8 in. / 3.56 m.
- Jib- Range of articulation: 130 Degrees.
View more Boom Lifts
English Electric Class H 400 Amp Fuse ID: 170550
- 600 VAC
- Class H
- Type: C400HR
- Style: Knife
- Length: 11.63 in.
- Quantity 4
View More 400 Amp Fuses
Manufacturer: | ENGLISH ELECTRIC |
Square D 3 Pole 60 Amp Type FA I-Line Breaker ID: 162634
- 240-480 VAC
- 250 VDC
- 3 Phase
- Cat #: FA34060
- Type: FA Series 2
- Quantity 1
View More 60 Amp Breakers
(2) Westpro Machinery FLO.2-6 Flotation Cells ID: 1400758
(2) Westpro Machinery FLO.2-6 Flotation Cells
Quantity: 2 Units
- Make: Westpro Machinery
- Model: FLO.2-6
- Condition: New Surplus
- Banks: Banks of 6 Cells
- Style: DR Style
- Cell Dimensions:
- Length: 6.75in
- Width: 6.75in
- Depth: 10.625in
- Overflow Discharge with Stainless Launder
- Each Flotation Mech. comes with Deublin Rotary Air Feed
- Belt Driven by a 1HP Motor
- Voltage: 575 Volt
- RPM: 3480
- With Manual On/Off Switch
- Cells are Made of Stainless Steel
- Setup on a Hinged/Pivoting Manual Dump/Cleaning System
- Setup on a Hinged/Pivoting Manual Dump/Cleaning System
- Mounted on Steel Frame with Built-In Clean Out Trough
- Center 1in Pipe Discharge
- Also Comes with Internal Cell to Cell Removable Flow Control Plated
- Overall Dimensions:
- Length: 78in
- Width: 30in
- Height: 55in
- Location: Savona, British Columbia, Canada
View More Flotation Cells
Illinois 302 CB Blower ID: 189599
- Blower 1:
- No.: 3728.
- Size: 302 CB.
- Inlet: 6 In.
- Outlet: 4 In. x 4 In.
- Blower 2:
- Serial: 3726.
- Size: 302 CB.
- Motor:
- Baldor 25 HP Industrial Motor.
- Volts: 230/460V.
- RPM: 3530.
- AMPS: 58/29.
- Phase: 3.
- Hz: 60.
- Frame: 284TS.
- Cat No.: M41071.
- Spec.: 10R080X188HI.
View more Centrifugal Blowers
Crane 4in Gate Valve ID: 1404513
Crane 4in Gate Valve
- Make: Crane
- Series: 465 1/2
- Size: 4in
- Construction: Bronze Trim
- Condition: Used Condition
- Class: 125S
- Pressure Rating: 200-WOG
- Overall Dimensions:
- Width: 11in
- Height: 21in
- Location: Savona, British Columbia, Canada
View More Gate Valves
4500 Gallon Mixing Tank with 10HP Agitator ID: 1155235
4500 Gallon Mixing Tank with 10HP Agitator
Quantity: 2
- Size: 4,544 US Gallons
- Diameter: 118"
- Height: 96"
- Motor:
- HP: 10 HP
- Voltage: 230/460V
- RPM: 1735 RPM
- Frequency: 60Hz
- Rubber Lined
- Location: TBA
View More Agitators and Mixers
Sandvik HLX5 Hydraulic Drifter Drill ID: 705227
- Model: HLX5
- Hours: 150
- Hole Diameter Drilling: 43 - 64 mm
- Hole Diameter: Reaming: 76 - 127 mm
- Power Class: 20 kW
- Percussion Rate: 67 Hz
- Operating Pressure Percussion: 120 - 220 Bar
- Max Rotation: 175 Bar
- Drill Steels: R32, R39 or Hex 35 mm Drifter Rods
- Shanks: 45 mm/T3B/R32/T35/R38/T45
- Weight: 210 kg
- Location: Middle East
View more Drifter Drills
P&H Outdoor 10 Tonne Capacity Crane ID: 1361705
P&H Outdoor 10 Tonne Capacity Crane
- Make: P&H
- Capacity: 10 Tonnes
- S/N: E110420
- Single Girder Overhead Bridge Crane
- Approx. 48ft Span
- 20ft Max Height Under Hook
- Wireless Radio Pendant Control
- 2-Speed - All Directions
- Location: Central Canada
View More Overhead Cranes
Make: | P&H |
Model: | Outdoor 10 Tonne Capacity Crane |
Gutor Uninterruptible Power Supply ID: 144324
- Gutor Electroninc Ltd. Uninterruptible Power Supply.
- For the oil and gas industry.
- Equipment no: 614-PS-6401.
- Gutor no: 1070345028-01.
- Manufactured in 2008.
- Equipment no: 614-PS-6401.
- Equipped with:
- Siemens Breakers:
- (1) 700A - HMG.
- (3) 600A - HLGA.
- (1) 500A - HLGA.
- (1) 125A - HDGA.
- (2) 100A - HDGA.
- ABB Switches:
- (2) 600A.
- 600V.
- S6H-D.
- (2) 600A.
- Siemens Breakers:
- For the oil and gas industry.
Please contact us for more information.
Lightnin Mixer ID: 451562
- 34 in. Shaft Length
- 4 in. 3 Blade Impeller
- Stainless Steel Impeller
- FHP ½ HP Motor
- 115 Volt
- 1725 RPM
- Frame: 56
- Single Phase
- Location: British Columbia, Canada
View more Agitators and Mixers
Dual Derrick FLC-503 Screen ID: 1387556
Dual Derrick FLC-503 Screen
- Make: Derrick
- Model: Dual FLC-503
- Condition: Used, Reported in Good Condition
- (2) Single Deck
- Single Side Tensioning
- Weir Feeders
- 2 Derrick SGX-34-18-460/480-6-001 Vibrators per Screen
- Horsepower: 2.5HP
- Voltage: 460/480 Volts
- Current: 4.1 FLA
- Frequency: 60Hz
- Mounted On Common Skid
- General Model Specifications:
- Screen Area:
- PMD: 49.8ft²
- PMD+: 69.0ft²
- Overall Dimensions:
- Length: 145.625in
- Width: 115.3125in
- Height: 68.625in
- Weir Height: 35.875in
- Weight: 8,600 Lbs.
- Screen Area:
- Location: Western USA
View More Horizontal Screens
LittleFuse Startco SE-302 Ground Fault Relay ID: 173754
- Input.
- 120 VAC.
- 2 Amp.
- 60 Hz.
- Model SE-302.
- Manual Available Upon Request.
- Quantity 1.
View More Ground Fault Relays
Manufacturer: | LITTLEFUSE |
Morbark Hurricane 18 Brush Chipper ID: 164075
- Use for chipping all types of wood and green waste.
- Chipping capacity: 18 in. diameter @ 120 ft/min.
- 65 in. x 38 in. high folding infeed chute opening.
- 3/8 in. thick floor.
- Reversible feed control with quick shut off.
- Infeed throat opening of 31 in. x 20 in.
- Caterpillar 3054EATTAC diesel engine.
- 140 HP.
- 2400 rpm.
- Dual plate clutch.
- Centrifugal pre-cleaner.
- 48 gallon fuel tank.
- Never used/installed.
- Reported in excellent condition.
- Ready to go into service.
View more Sawmill Equipment