Equipment Quotes
Balemaster Auto Tie Baler ID: 264432
- Model : BB3230TQ-8
- Serial # B235-01-6001548
- Automatic auto-tie system AT-1-BB4
- 30HP / 600volt
- 8" Cylinder
- 30'' x 32'' feed opening
- Location: Eastern Canada
View more Recycling Equipment
Schoma 40 Ton Tunnel Locomotive ID: 177408
- Year: 2005.
- Drive system: Diesel-hydrostatic.
- Usage: tunnel & underground.
- Track gauge: 1000 mm (can be changed to 900 mm).
- Deutz 250 HP diesel engines.
- Max. speed: 32 km/h.
- Min. curve radius: 40 m.
- Min. track clearance: 15 mm.
- Structure:
- Continuous main frame in box design.
- Engine compartment with access flaps for maintenance purposes.
- Fuel tank mounted on main frame and protected against collisions.
- Rail guards adjustable in height.
- Electric components inside enclosed cubicle in the drivers cabin.
- Locomotive main frame:
- Main frame in box design with high torsion resistance.
- MAG welded.
- Side plates with cut-outs for inspection of axle gears, brake gears, etc.
- 2 lifting points at both sides.
- Operators cabin:
- 2 door cabin.
- One operators desk with ergonomic arrangement of controls and levers.
- Front window equipped with wipers.
- Fuel system:
- Filler caps at both sids of the locomotive.
- Fuel gauge on operators panel.
- Fuel tank capacity: 600 L approx.
- Quantity: 1.
View more Diesel Operated Locomotives
TIME Advanced Stoper Longhole Drill ID: 1398203
TIME Advanced Stoper Longhole Drill
- Make: TIME
- Model: Advanced Stoper
- Year: 2023
- Type: Longhole Drill
- Condition: New, No Hours
- Drill: S36 IR Drifter Drill
- Aluminum Feed
- Heavy-Duty Centralizer (Used)
- Nominal Diameter: 35 - 89 mm (1.38in-3.5in)
- Nominal Length: Up To 46m (Up To 150ft)
- Reamed Diameter: Up To 127mm (Up To 5in)
- Blows/Minute: 1630 @ 500 kPa (1630 @ 72.52 PSI)
- Air Consumption: 14m³/min @ 500 kPa (494.41 CFM @ 72.52 PSI)
- Traverse: 5ft Traverse
- Side to Side Hole Positioning of 66in (168cm)
- (3) Helac Actuators for Increased Stability and Less Wear Parts
- 135° Dump, 360° Radial and an Optional 180° Pivot Positioning
- 135° Dump, 360° Radial and an Optional 180° Pivot Positioning
- Carrier:
- 30HP Radial Piston Air Motor (@1200 RPM)
- 116 PSI & 890 CFM Air Delivery
- Tandem Gear Hydraulic Pump
- 1.91in³ Per Rev. @3000 PSI
- High Quality Proportional Directional Control Valves
- High Quality Motion Control and Cross-Port Check Valves
- Two Lever Pilot (Low) Pressure Tethered Remote Tramming Valve
- Skid Steering with Independent Port and Starboard Wheel Drives
- Planetary 4-Wheel Hydraulic Drive with Fail-Safe Brakes
- 4 Independent Heavy-Duty Jacks with Load Lock (Cross Port Check) Valves for Leveling
- Tow-Bar and Dis-Engaging Wheel Drives for Towing
- Rotation Barrier – Double Hinged (Opens from the Left or Right Side)
- 30HP Radial Piston Air Motor (@1200 RPM)
- Location: Eastern Canada
View More Jumbo Drills
CAT 1500 kW Generator ID: 218351
- Year: 1987.
- 150 kW
- Dulce valve and Huron actuator.
- CAT 3516 engine.
- 2168 HP.
- 1800 RPM.
- 277/480 volt.
- 3 phase.
- Generator Model: SR-4
- EMCP digital control panel.
- 2000 amp main-line circuit breaker.
- Weather enclosure.
- 200 gallon (approx.) sub-base day tank.
- 284 in. long x 106 in. wide x 123 in. high.
- Weight: 40,000 lbs.
- Location: Europe.
View more Diesel Generators
Manufacturer: | CAT |
Atlas 3 ½ in. x 5 ½ in. Laboratory Jaw Crusher ID: 665465
- Jaw Opening: 3 ½ in. x 5 ½ in
- Mounted on 2 ft. x 3 ft. Common Base
- 2 HP Motor & Drive
- Flywheel Guard
- Drive Guard
- Feed Hopper and Ore Pan
- Location: British Columbia, Canada
View more Lab Jaw Crushers
General Electric Stop/Start ID: 1388746
General Electric Stop/Start
MAX V: 600V
CR2943NAI02CA
- Location: Savona, British Columbia, Canada
Baldor 7.5 HP Motor ID: 191305
- ID No.: F-6670-01-629.
- Volts: 230/460V.
- RPM: 3490.
- Frame: 213T.
- Phase: 3.
- Shaft Length: 3 3/4 In.
- Shaft Diameter: 1 1/4 In.
View more 7.5 HP Motors
Siemens 200 Amp Disconnect ID: 157604
- 240V.
- 2 wire.
- Single phase.
- Suitable for service entrance.
Please contact us for more information.
View more 200 Amp Disconnects
Manufacturer: | SIEMENS |
Allen-Bradley Power Switch ID: 1396344
Allen-Bradley Power Switch
2 Pole Only
3/4HP
115-230V DC MAX
1 or 2 Pole
1HP
120-240V AC MAX
- Location: Savona, British Columbia, Canada
2000 Amp 3 Pole Breaker ID: 516613
2000 Amp
3 Pole
Stainless Steel 10 cu. ft. Conical Hopper ID: 193293
- 40 In. Diameter x 45 In. Overall Height.
- Top has a 24 In. Square Flanged Inlet.
- Three level probes.
- 4 In. Inlet Pneumatic Vent Line.
- Outlet of Hopper is a round 12 In. Diameter Flanged Outlet.
View more Hoppers
Red White 4 in. Gate Valve ID: 730122
- Size: 4 in.
- Class: 125
- Body: C.I
- Body Seat: Bronze
- 8 Bolt Flanged Ends
- Location: British Columbia, Canada
View more Gate Valves
Baldor 5 HP VFD ID: 187829
- Input
- 460 VAC
- 50/60 Hz
- Output
- 460 VAC
- 0 - 400 Hz
- Cat #: ID15405-E
- Quantity 1
View More 5 HP VFDs
Manufacturer: | BALDOR |
Edem 18 in. x 30 ft. Vibrating Conveyor ID: 76388
- 18 in. wide x 30 ft. long.
- 11 in. high sides.
- Mounted on steel beam frame.
- 7.5 hp electric motor.
- 575 volt, 1740 rpm.
- Fibreglass section for metal detector.
- With Rens A10-36 Metal detector.
View more Vibrating Conveyors
Fuse Holder ID: 1256787
Sylvania 1 Pole 15 Amp Breaker ID: 335669
- 1 Pole
- Amp: 15
- Volt: 120/240
- Style: Bolt In
- Type: QB
- Single Phase
- Location: British Columbia, Canada
View more Breakers
Siemens 125 HP Motor ID: 160361
- 460V.
- 3575 rpm.
- 3 phase.
- 60 Hz.
- Frame: 444TS.
- 138 Amps.
Please contact us for more information.
View more 125 Horsepower Motors
Manufacturer: | SIEMENS |
Tyson 25 Ton Outdoor Overhead Crane ID: 58021
- 25 ton imperial ton lifting capacity.
- 25 ft. clearance from ground to sling hooks.
- 18 ft. width clearance.
- 30 imperial tons of cylinder pull.
- 6 imperial tons push/pull buggy cylinder.
- 25 imperial tons capacity structure, shield to concrete.
- 5 hp power system unit.
- 2 speed gear pumps (9 & 3 GPM).
- 15 gallon reserve.
- 2 control valves and full lock-valve system.
Tuthill 3006-21L2 Positive Displacement Blower ID: 467847
- Model: 3006-21L2
- RPM: 3600
- Complete with
- Baldor Motor
- 7.5 HP
- Volts: 208-230/460
- RPM: 1760
- Twin Universal Silencers
- Model: URB-3
- Baldor Motor
- Overall Dimensions: 30 in. Wide x 76 in. Long x 62 in. High
- Location: British Columbia, Canada
View more Positive Displacement Blowers
2005 Lippmann 5165LS Impact Crusher ID: 218064
- Only 300 hours!
- Set up as secondary impact crusher.
- Size: 51 in. x 65 in.
- Production: 230-365 TPH (dependent on material).
- 300 hp motor (includes extra new motor).
- 485 rpm.
- Lots of extra parts included.
- Contact for additional details.
- Location: Eastern, U.S.A.
View more Impact Crushers
RenoCell MX0504D Metal Recovery System ID: 1247004
RenoCell MX0504D Metal Recovery System
- Make: Renovare
- Type: RenoCell
- Model: MX0504D
- DC Amps: 200 Amps
- Water Recirculation Rate: 32 GPM (120 l/m)
- Electrical:
- Frequency: 50/60Hz
- Phase: 3-Phase
- Power Consumption:
- 15 Amps @220 Volt
- 8 Amps @480 Volt
- Cell: 4 Cells
- Model: M500D
- Material: Polypropylene
- Anode: DSA
- Cathode: Carbon
- Metal Loading: 3-5 Kgs
- Flow Rate: 30 to 90 l/m
- Dimension: 645mm Long x 200mm Wide
- Overall Dimensions:
- Length: 54in (1,372mm)
- Width: 24in (610mm)
- Height: 72in (1,778mm)
- Weight: 475 Lbs. 216 Kgs
- Description: A RenoCell metal recovery system consists of the world's most efficient and highest performance electrolytic cell, a DC power supply and auxiliary equipment. Metal bearing rinse water or a process stream is electrolytically stripped of dissolved metal ions as it passes through the RenoCell. The metal ions are deposited as a solid metal onto a specialized high surface area, carbon cathode. When the cathode is fully loaded, it is easily removed from the cell and replaced with a fresh one. The loaded cathode may be sold for its metal value.
- Location: Central USA
View More Ore Processing Plants
Wacker Neuson HI770 XHD Portable Heater ID: 1407804
Wacker Neuson HI770 XHD Portable Heater
Quantity: 2 Units
- Make: Wacker Neuson
- Model: HI770 XHD
- Type: Indirect Fired Heater
- Style: Portable - Trailer Mounted
- Condition: Used Condition
- Hours:
- Unit 1: 7,955.6
- Unit 2: 5,169.6
- Capacity: 770,000 BTU/Hr.
- Capacity Sizing Air Heat: 962,500ft³
- Capacity Drying Size: 342,527ft³
- Air Flow: 4,000 CFM
- Static Pressure: 4in W.C.
- Fuel Type: Diesel
- Tank Capacity Burner Fuel: 235.5 US Gal.
- Runtime Burner (100%): 43 Hours
- Runtime Burner (75%): 57 Hours
- Firing Rate: 5.5 GPH
- Nozzle Type: 4.5/45 B
- Burner Model: Carlin 301CRD
- Electrical Rating: 240 Volt, 3-Phase
- Engine: Kubota
- Type: 4-Cycle, 3-Cylinder - Liquid Cooled
- Power Output: 16.9HP
- Generator: Marathon 282PSL
- kW/kVA: 16kW (20kVA)
- Aux Output: 120 Volts, 15 Amps
- Trailer Hitch: 3in Pintle
- View Spec Sheet Below
- Location: Western Canada
View More Portable Heaters
10 in. Dia. Rotary Valves ID: 711261
- Prater
- Model: PAV10 S C.I
- Carbon Steel Rotor
- Cast Steel Housing
- 10 in. x 10 in. Square Flange Inlet + Discharge
- Chain Driven(#50) by a Nord .75 HP Gearhead Motor
- 230/460 Volt
- 1710 RPM
- 53.84 - 1 Gear Reduction
- 16 Tooth sprocket on drive
- 34 Tooth sprocket on valve
- Final speed: 14.91 rpm
- All Mounted on Common Operating Base
- Location: British Columbia, Canada
View more Rotary Valves
Metso C125 Jaw Crusher ID: 1397508
Metso C125 Jaw Crusher
- Make: Metso Nordberg
- Model: C125
- Type: Jaw Crusher
- Year: 2004
- Condition: Used, Reported in Good Condition, Ready-to-Work
- Mounted on Skid Base
- Feed Opening: 49in Wide x 37in Deep
- Max Feed Size: 30in Approx.
- Min/Max Discharge Size: 4in-10in (100mm-254mm)
- Max Capacity: 245-335 TPH (4in Discharge) To 600-830 TPH (10in Discharge)
- Drive: Alconza S.A. Electric Motor
- Power Output: 110kW (147HP)
- Speed: 1489 RPM
- Voltage: 380 Volts
- Current: 197 Amps
- Frequency: 50Hz
- Overall Dimensions: (Without Skid Base)
- Length: 162in
- Width: 111in
- Height: 118in
- Weight: 83,730 Lbs.
- Location: Spain
View More Jaw Crushers