Equipment Quotes
Cedarapids 24 inch X 16 inch roll crusher. ID: 47943
- Cedarapids 24 inch X 16 inch roll crusher.
- On stand with electric drive motor.
Westinghouse 3 Pole 150 Amp FDB Breaker ID: 191841
- 600 VAC
- 250 VDC
- 3 Pole
- Cat #: FDB3150
- Quantity 1
View More 3 Pole 150 Amp Breakers
WEG 5HP Electric Motor and Reducer ID: 1392830
WEG 5HP Electric Motor and Reducer
- Make: WEG Motors Ltd.
- Model: 184T 1269
- Condition: Used
- Power Output: 5HP
- Speed: 1740 RPM
- Voltage: 575 Volt
- Current: 4.8 Amps
- Frequency: 60Hz
- Frame: 184T
- Reducer: David Brown Radicon
- Series: AU500-8
- Ratio: 30-1
- Output: 58 RPM
- Location: Savona, British Columbia, Canada
View More 5HP AC Motors
Gould 2 Amp Fuse ID: 188492
- 600 VAC
- Class C
- Cat #: FES2
- Style: Bolt-On, or Ferrule
- Length: 2.25" Ferrule, 3.375" Bolt-On
- Quantity 46
View More 2 Amp Fuses
Manufacturer: | GOULDS |
2010 JLG 600AJ Articulating Boom Lift ID: 195445
- Platform Height: 60 ft 7 in. / 18.47 m.
- Platform Capacity- Unrestricted: 500 lb / 226.80 kg.
- Horizontal Reach: 39 ft 9 in. / 12.12 m.
- Basket: 8 ft. wide with side entry.
- Auxiliary Power: 12 Volts DC.
- Capacity- Fuel Tank: 30 gal. / 113.56 L.
- Enginer Type- Diesel: DEUTZ TD 2.9L Tier 4 Final 67 hp.
- Axle Oscillation: 8 in. / 0.2 m.
- Drive speed - 4WD: 4.25 mph / 6.84 km/h.
- Gradeability - 4WD: 45%.
- Swing: 360 Degrees.
- Swing Type: Continuous.
- Turning Radius- Outside (4WS): 11 ft 8 in. / 3.56 m.
- Jib- Range of articulation: 130 Degrees.
View more Boom Lifts
English Electric Class H 400 Amp Fuse ID: 170550
- 600 VAC
- Class H
- Type: C400HR
- Style: Knife
- Length: 11.63 in.
- Quantity 4
View More 400 Amp Fuses
Manufacturer: | ENGLISH ELECTRIC |
Square D 3 Pole 60 Amp Type FA I-Line Breaker ID: 162634
- 240-480 VAC
- 250 VDC
- 3 Phase
- Cat #: FA34060
- Type: FA Series 2
- Quantity 1
View More 60 Amp Breakers
(2) Westpro Machinery FLO.2-6 Flotation Cells ID: 1400758
(2) Westpro Machinery FLO.2-6 Flotation Cells
Quantity: 2 Units
- Make: Westpro Machinery
- Model: FLO.2-6
- Condition: New Surplus
- Banks: Banks of 6 Cells
- Style: DR Style
- Cell Dimensions:
- Length: 6.75in
- Width: 6.75in
- Depth: 10.625in
- Overflow Discharge with Stainless Launder
- Each Flotation Mech. comes with Deublin Rotary Air Feed
- Belt Driven by a 1HP Motor
- Voltage: 575 Volt
- RPM: 3480
- With Manual On/Off Switch
- Cells are Made of Stainless Steel
- Setup on a Hinged/Pivoting Manual Dump/Cleaning System
- Setup on a Hinged/Pivoting Manual Dump/Cleaning System
- Mounted on Steel Frame with Built-In Clean Out Trough
- Center 1in Pipe Discharge
- Also Comes with Internal Cell to Cell Removable Flow Control Plated
- Overall Dimensions:
- Length: 78in
- Width: 30in
- Height: 55in
- Location: Savona, British Columbia, Canada
View More Flotation Cells
Illinois 302 CB Blower ID: 189599
- Blower 1:
- No.: 3728.
- Size: 302 CB.
- Inlet: 6 In.
- Outlet: 4 In. x 4 In.
- Blower 2:
- Serial: 3726.
- Size: 302 CB.
- Motor:
- Baldor 25 HP Industrial Motor.
- Volts: 230/460V.
- RPM: 3530.
- AMPS: 58/29.
- Phase: 3.
- Hz: 60.
- Frame: 284TS.
- Cat No.: M41071.
- Spec.: 10R080X188HI.
View more Centrifugal Blowers
Crane 4in Gate Valve ID: 1404513
Crane 4in Gate Valve
- Make: Crane
- Series: 465 1/2
- Size: 4in
- Construction: Bronze Trim
- Condition: Used Condition
- Class: 125S
- Pressure Rating: 200-WOG
- Overall Dimensions:
- Width: 11in
- Height: 21in
- Location: Savona, British Columbia, Canada
View More Gate Valves
4500 Gallon Mixing Tank with 10HP Agitator ID: 1155235
4500 Gallon Mixing Tank with 10HP Agitator
Quantity: 2
- Size: 4,544 US Gallons
- Diameter: 118"
- Height: 96"
- Motor:
- HP: 10 HP
- Voltage: 230/460V
- RPM: 1735 RPM
- Frequency: 60Hz
- Rubber Lined
- Location: TBA
View More Agitators and Mixers
Sandvik HLX5 Hydraulic Drifter Drill ID: 705227
- Model: HLX5
- Hours: 150
- Hole Diameter Drilling: 43 - 64 mm
- Hole Diameter: Reaming: 76 - 127 mm
- Power Class: 20 kW
- Percussion Rate: 67 Hz
- Operating Pressure Percussion: 120 - 220 Bar
- Max Rotation: 175 Bar
- Drill Steels: R32, R39 or Hex 35 mm Drifter Rods
- Shanks: 45 mm/T3B/R32/T35/R38/T45
- Weight: 210 kg
- Location: Middle East
View more Drifter Drills
P&H Outdoor 10 Tonne Capacity Crane ID: 1361705
P&H Outdoor 10 Tonne Capacity Crane
- Make: P&H
- Capacity: 10 Tonnes
- S/N: E110420
- Single Girder Overhead Bridge Crane
- Approx. 48ft Span
- 20ft Max Height Under Hook
- Wireless Radio Pendant Control
- 2-Speed - All Directions
- Location: Central Canada
View More Overhead Cranes
Make: | P&H |
Model: | Outdoor 10 Tonne Capacity Crane |
Gutor Uninterruptible Power Supply ID: 144324
- Gutor Electroninc Ltd. Uninterruptible Power Supply.
- For the oil and gas industry.
- Equipment no: 614-PS-6401.
- Gutor no: 1070345028-01.
- Manufactured in 2008.
- Equipment no: 614-PS-6401.
- Equipped with:
- Siemens Breakers:
- (1) 700A - HMG.
- (3) 600A - HLGA.
- (1) 500A - HLGA.
- (1) 125A - HDGA.
- (2) 100A - HDGA.
- ABB Switches:
- (2) 600A.
- 600V.
- S6H-D.
- (2) 600A.
- Siemens Breakers:
- For the oil and gas industry.
Please contact us for more information.
Lightnin Mixer ID: 451562
- 34 in. Shaft Length
- 4 in. 3 Blade Impeller
- Stainless Steel Impeller
- FHP ½ HP Motor
- 115 Volt
- 1725 RPM
- Frame: 56
- Single Phase
- Location: British Columbia, Canada
View more Agitators and Mixers
Dual Derrick FLC-503 Screen ID: 1387556
Dual Derrick FLC-503 Screen
- Make: Derrick
- Model: Dual FLC-503
- Condition: Used, Reported in Good Condition
- (2) Single Deck
- Single Side Tensioning
- Weir Feeders
- 2 Derrick SGX-34-18-460/480-6-001 Vibrators per Screen
- Horsepower: 2.5HP
- Voltage: 460/480 Volts
- Current: 4.1 FLA
- Frequency: 60Hz
- Mounted On Common Skid
- General Model Specifications:
- Screen Area:
- PMD: 49.8ft²
- PMD+: 69.0ft²
- Overall Dimensions:
- Length: 145.625in
- Width: 115.3125in
- Height: 68.625in
- Weir Height: 35.875in
- Weight: 8,600 Lbs.
- Screen Area:
- Location: Western USA
View More Horizontal Screens
LittleFuse Startco SE-302 Ground Fault Relay ID: 173754
- Input.
- 120 VAC.
- 2 Amp.
- 60 Hz.
- Model SE-302.
- Manual Available Upon Request.
- Quantity 1.
View More Ground Fault Relays
Manufacturer: | LITTLEFUSE |
Morbark Hurricane 18 Brush Chipper ID: 164075
- Use for chipping all types of wood and green waste.
- Chipping capacity: 18 in. diameter @ 120 ft/min.
- 65 in. x 38 in. high folding infeed chute opening.
- 3/8 in. thick floor.
- Reversible feed control with quick shut off.
- Infeed throat opening of 31 in. x 20 in.
- Caterpillar 3054EATTAC diesel engine.
- 140 HP.
- 2400 rpm.
- Dual plate clutch.
- Centrifugal pre-cleaner.
- 48 gallon fuel tank.
- Never used/installed.
- Reported in excellent condition.
- Ready to go into service.
View more Sawmill Equipment
Caterpillar 3516 1400 kW Diesel Generators ID: 563735
CAT 3516, 1400 kW Diesel Gen Sets
3 Units Available.
600 Original Hours
2130 HP
Comes with Radiators & Mufflers.
- CAT Diesel Engine
- Model: 3516
- HP: 2130
- Marathon Electric Generator
- Model: 684FDR8445GG W
- kW: 1400 Prime
- KVA: 1750
- Volt: 2400/4160
- Phase: 3 HZ: 60
- RPM: 1800
- Packages Includes:
- Switch Gear & Transfer Switches
- Switch Gear & Transfer Switches
- Location: Western USA
View more Diesel Generators
200 AMP PIERCE NON-RENEWABLE FUSE ID: 358397
200 AMPS
VAC= 250V
CLASS:
TYPE:
LENGTH: 7"
Cutler Hammer 225 Amp Distribution Panel ID: 155968
- 120/208V.
- 3 phase.
- 60 Hz.
- 4 wire.
- BA bolt-in breakers.
- 42 circuit.
Please contact us for more information.
View more 225 Amp Panels
View Our Inventory of Breakers
Manufacturer: | CUTLER HAMMER |
Westinghouse 3 Pole 20 Amp Bolt-On Breaker ID: 191343
- 240 VAC Max
- 3 Pole
- Bolt-on
- Type BA
- Cat #: BAB3020H
- Quantity 2
View More 3 Pole 20 Amp Breakers
Manufacturer: | WESTINGHOUSE |
True Line 4 in. Ball Valves ID: 730222
- Size: 4 in.
- Stainless Steel Ball
- Body: CI
- Qty: 2
- 8 Bolt Flanges on Ends
- Location: British Columbia, Canada
View more Ball Valves
G.E. 7.5 HP Induction Motor ID: 194752
- Model: SKE213BC104.
- Volts: 575V.
- RPM: 3515.
- Frame: 213T.
- Phase: 3.
- Shaft Length: 3 3/8 In.
- Shaft Diameter: 1 1/4 In.
View more 7.5 HP Motors
Baldor-Reliance Super-E 15 HP Motor ID: 181420
- 230/460V.
- 3 phase.
- 60 Hz.
- 1765 rpm.
- Frame: 254T.
- TEFC enclosure.
View more 15 HP Motors
Korfmann 16 in. Ventilation Fan ID: 209161
- Manufacturer: Korfmann.
- Model: 32852.
- Type: DV4.
- Inlet: 16 in.
- Outlet: 11 in.
- Height: 38 in.
- Air operated.
View Spec Sheet Below
View more Air Driven Ventilation Fans
# 8 - 3 Conductor Cabtire ID: 228671
- Feet: 45
- Volts: 600 Rated
- Location: British Colombia Canada
Veiw More Cabtires
500 AMP ECON DUAL ELEMENT FPE FUSE ID: 357596
500 AMPS
VAC=600V OR LESS
CLASS:F
TYPE:FPE
LENGTH: 14"
Casagrande B 135 Piling Rig ID: 179079
- Year: 2011.
- Operating hours: 7700 (approx.)
- Max. depth in CFA; FDA: 19 m.
- Max. diameter in CFA system: 800 mm.
- Working weight: 42 tons.
- Chassis with hydraulic extending tracks.
- Width of crawler: 2500 - 3700 mm.
- Track width: 600 mm.
- Engine power: 164 kW.
- Main winch.
- Line pull: 135 kN.
- Aux. winch.
- Line pull: 70 kN.
- Pull down system: 240 kN.
- Rotary head H12.
- Nominal torque: 112 kN.
- Max. drilling speed: 33 rpm.
- Piling rig includes:
- Camera system.
- Full CFA monitoring system.
- Jean Lutz (brand new).
View more Quarry Drills
Manufacturer: | Sandvik |
14,500 Gallon Fiberglass Tank ID: 85589
- 8.5 ft. x 40 ft. Fiberglass Tank.
- Double walled.
- Capacity: 14,500 gallons / 50,000 litres.
- Steel manway.
- 5 - 4 in. threaded fittings.
- External baffles for burial.
- Tank previously used for fuel.
- Defumed and aerated.
- Ideal for Fire protection.
Please contact is for more information.
2014 Gehl Skid Steer ID: 237570
- Model Name: 4640
- Type: Skid Steer Loader
- Manufacturer: Gehl
- Fuel Type: Diesel
- Hours: 558
- Cab: Head
- Location: Eastern USA
View more Skid Steers
Limitron KTK-30 Amp Fuse ID: 1066757
Type: KTK-30
Fast-Acting
Midget Fuse
600VAC
Interrupt Rating: 100KA
Gardner Denver Piston Air Motor ID: 254633
- 1- Gardner Denver 5 Cylinder Piston Air Motor
- Approx. 9 - 10 HP
- Bi-Directional Controls
- Comes Complete with Gear Reduction Adapter with a 22 Tooth #60 Sprocket
- Location: Western Canada
View more Air Motors
Sylvania 51 kVA Power Transformer ID: 187962
- Cat. No: 512-LP3-3N.
- Primary Voltage: 460.
- Secondary Voltage: 460Y/266.
- Ph: 3.
- Hz: 60.
- Weight: 480 lbs.
View more Dry Type Transformers
Westinghouse 1 Pole 30 Amp Breaker ID: 335601
- 1 Pole
- Amp: 30
- Volt: 120/240
- Style: Bolt On
- Type: BA
- Single Phase
- Location: British Columbia, Canada
View more Breakers
General Electric 150 HP Motor ID: 181155
- 575V.
- 3 phase.
- 60 Hz.
- 1180 rpm.
- Frame: 447T.
- TEFC enclosure.
- New Surplus
View more 150 HP Motors
Electromec 5 HP Motor ID: 234863
- HP: 5
- Volts: 575
- RPM: 1800
- Frame: EAD184T
- 60 Hz
- Location: Western Canada
View more Motors
Ametek 3 ft x 6 ft Drum Filter ID: 83756
- Vacuum type.
- 3 ft. wide x 6 ft. long.
- Stainless steel drum.
- Stanless steel tank.
- Please inquire for additional details.
2012 John Deere 60D Compact Excavator ID: 225329
- Yanmar diesel engine.
- 4 cylinder.
- Hydrostatic.
- Hours: 2754.
- 6 ft. 7 in. dozer blade.
- Brand 43 in. cleanup bucket.
- Brand 24 in. digging bucket.
- Air conditioned cab.
- 16 in. rubber tracks.
- Excellent interior.
- Undercarriage: 90% remaining approx.
- Location: Western, Canada
- Contact for more information.
View more Mini Excavators
Omron Sysdrive 30 hp Variable Frequency Drive ID: 147066
- Omron Sysdrive VFD.
- 2 units available.
- 30 hp.
- Model: 3G3IV-B4220-EV2.
- Input: 380-460V.
- Output: 0-460V.
- DC: 510-660V.
- 3 phase.
- 50/60Hz.
- 59A.
- Model: 3G3IV-B4220-EV2.
Please contact us for more information.
2011 MTU 2.5 MW Diesel Generators ID: 213737
- MTU Engine Details:
- Engine Model: 20V4000G43
- Engine Type: 4 Stroke, Water Cooled
- Aspiration Type: Turbo Charger, Inter-cooler
- Power: 2740kWh
- RPM: 1800
- Number of Cylinders: 20
- Cylinder Configuration: 90° V
- Bore: 170mm
- Stroke: 210mm
- Displacement: 95.4 Liter
- Compression Ratio: 16.4:1
- Combustion System: Direct Injection
- Mean Effective Pressure:19.2 bar
- Mean Piston Speed: 12.6m/s
- Governor Type: ADEC
- Cooling System: Radiator
- Hyundai Alternator:
- Year: 2011
- Type: HFC7638-4P
- Rated Capacity: 2500KW
- Factor: 0.8
- Rated Voltage: 440 Volts
- Rated Current: 4100.5 Amps
- RPM: 1800
- HZ: 60
- Brushless Self-Exciting Type
- Poles: 4
- 3 Phases
- Bearing: Anti-Friction Bearing
- Insulation Class: F
- Voltage Adjustment Range: Plus Minus 10%
- Cooling Type: Air Cooled
- Fuel System:
- Fuel Specification: EN590, Grade Nr.
- 1/2-D(ASTM D975)
- Class A2(BS 2869)
- Fuel Consumption:
- 100% Load:197g/kWh.
- 75% Load: 210g/kWh.
- 50% Load: 225g/kWh.
- 25% Load: 259g/kWh.
- No Load: 57.kg/hr.
- Fuel Specification: EN590, Grade Nr.
- Coolant System (High Temperature):
- Coolant Water Capacity: 205 Liter.
- Coolant temperature (Engine Outlet): 100°
- Coolant Flow Rate: 94m³/h
- Coolant System (Low Temperature):
- Coolant Water Capacity (Intercooler): 55 Liter
- Coolant Temperature (Intercooler Inlet): 55
- Coolant Flow Rate: 94m³/h
- Noise:
- Engine Surface Noise: 115dB(A)
- Undamped Exhaust Gas Noise: 128dB(A)
- Engine Protection (Alarm/Shutdown):
- Cooling Water Over Temperature: 102°/104°
- Intercooler Over Temperature: 75°
- Lubrication Oil Low Pressure: 3.9bar/3.6bar.
- Lubrication Over Temperature: 99°/101°
- Fuel Over Temperature: 100°
- Engine Over Speed: 1950 RPM
- Location: Asia
View More 2001-6000kW Diesel Generators
Masaba 30in x 130ft Radial Stacking Conveyor ID: 1388099
Masaba 30in x 130ft Radial Stacking Conveyor
- Make: Masaba
- Size: 30in Wide x 130ft Long
- Type: Radial Stacking Conveyor
- Year: 2010
- Condition: Used
- Style: Truss Framed
- Discharge Height: 42ft 2in
- Belt: Good, "Like New" 2-Ply Belt
- Full Catwalks with Handrails
- Tires: Good, "Like New" Tires
- Power Radial
- Power: 2.5HP Electric Motor
- Voltage: 240/480 Volt
- Frequency: 60Hz
- Phase: 3-Phase
- Drive Motor: 40HP Electric Motor
- Belt Drive
- Voltage: 240/480 Volt
- Frequency: 60Hz
- Phase: 3-Phase
- Location: Eastern USA
View More Radial Stacking Conveyors