Henan Shibo 2PG400X250 Double Roll Crusher ID: 1424568

Henan Shibo 2PG400X250 Double Roll Crusher

• Make: Henan Shibo Mechanical Engineering Co.
• Model: 2PG400X250
• Condition: Used, Reported in Good Condition 
• Hours: Less Than 40 Hours Use
• Number of Rolls: 2 Rolls
• Capacity: 5-15 TPH
• Roll Diameter: 400mm (15.7in)
• Roll Length: 250mm (9.8in)
• Teeth Material: ZGMn13
• Max Feed Size: 25mm
• Discharge Size: 2-8mm
• Compression Strength: 180 MPa
• Comes with Channel Steel Stand With Fork Pockets and Stairs
• Drive: (2) Electric Motors
  • Power Output: 5.5kW
  • Roller Speed: 180 RPM 
  • Voltage: 600 Volts
  • Frequency: 60Hz
  • Phase: 3-Phase
    
    
• Overall Dimensions: Crusher Only
  • Length: 1,837.5mm (72.3in)
  • Width: 1,904mm (75in)
  • Height: 1,001mm (39.4in)
  • Weight: 1.5 Tons
    
    
• Location: Eastern Canada

View More Roll Crushers

3 KVA Westinghouse 480 - 120/240 Single phase For Sale ID: 50747

3 KVA Westinghouse Transformer

480 - 120/240 Single phase

Come With built in 8 Circuit breaker Panel

Epoxy Coated

16 in. x 15 ft. Column Cell Assembly ID: 102055

• Column cell assembly.
• 16 in. dia. x 15 ft. high.
• Spray nozzle assembly.
• Top concentrate launder.

View more Floatation Cell 

14,500 Gallon Fiberglass Tank ID: 152329

• 8.5 ft. x 40 ft. Fiberglass Tank.
  • Double walled. 
  • Capacity: 14,500 gallons / 50,000 litres.
  • Steel manway.
  • 5 - 4 in. threaded fittings.
  • External baffles for burial.
  • Tank previously used for fuel.
    • Defumed and aerated.
• Ideal for Fire protection.

Please contact is for more information.

More Equipment Deals

Buss 200 Amp 250 Volt Fuse ID: 522336

Amp: 200

Volt: 250

CAT#: NON-200

One Time Fuse

Honeywell Timer ID: 1263141

Honeywell Timer

Type: 117

P75EAAP5

RPM 1/2 

120V

CY 60 

W 2.7

Tamrock DHA 550 Quarry Drill ID: 109112

• Tamrock Quarry Drill.
  • Model: DHA 550.
  • Year: 1999.
  • Hours: 1,080.
  • Enclosed cab with air conditioning.
  • Deutz 6 cylinder diesel engine.
    
    • Rebuilt in 2014.
    • Hours: 7,483.
  • Reported to be in excellent working condition.
  • Can drill up to 300 meters.

Syntron Vibrating Pan Controller ID: 845418

• Model: CRSC-2C
• Volts: 460
• Amps: 30
• Single Phase
• 60 Hz
• Location: British Columbia, Canada

View more Vibrating Pan Feeders

Wagner HST-1A Scooptram ID: 1424661

Wagner HST-1A Scooptram

• Make: Wagner Mining Equipment
• Model: HST-1A
• Year: Refurbished in 2021
• Hours: 293.4 Hours
• Condition: Used, Reported in Good Condition
• Capacity: 1-Yard
• Engine: Deutz F4L-912W
• MSHA Certified - Approx. 6 Months Ago
• Canopy: Equipped
  
  
• General Model Specifications:
  • Capacity:
    • Breakout Force: 3,157 kg (6,960 Lbs.)
    • Break Out Force, Hydraulic: 3,824 kg (8,430 Lbs.)
    • Tramming Capacity: 1,361 kg (3,000 Lbs.)
  • Bucket:
    • Nominal Heaped: 0.76m³ (1.0yd³)
    • Struck: 0.67m³ (0.875yd³)
    • Boom Raising Time: 4.3 Seconds
    • Boom Lowering Time: 3.6 Seconds
    • Bucket Dump Time: 2.5 Seconds
  • Engine: Deutz Diesel F4L-912W
    • Power Output: 55HP (41kW)
    • Max Torque: 135 ft-lbs. (183Nm)
    • Cooling: Air Cooled
  • Steering: Articulated, Hydraulic Power Steering
    • Turning Angle: 85° (42.5° Each Way)
    • System Pressure: 12.4MPa (1,800 PSI) 
      
      
• Location: West Central USA

View More Scooptrams

Cutler Hammer 400 Amp Distribution Panel ID: 155943

• 1st Section:
  • 120/208V.
    • 3 phase.
  • 4 wire.
  • BA Bolt-in breakers.
  • 72 circuit.
  • 59 single pole 15 amp breakers.
  • 1 double pole 15 amp breaker.
  • 3 single pole 30 amp breakers.
• 2nd Section:
  • 120/208V.
    • 3 phase.
  • 4 wire.
  • BA Bolt-in breakers.
  • 72 circuit.
  • 58 single pole 15 amp breakers.
  • 1 double pole 15 amp breaker.

Please contact us for more information.

View more 400 Amp Panels

View Our Inventory of Breakers

Vibramech H2-48-24 2-Deck Horizontal Screen ID: 1388219

Vibramech H2-48-24 2-Deck Horizontal Screen

• Make: Vibramech
• Model: H2-48-24
• Year: 2010
• Condition: Used, Reported in Good Condition
• Number of Decks: 2-Deck
• Inclination: Horizontal
• Spray Bars: 4
• Vibration Motors: 4 x 11 kW
• Deck Width: 2,440mm (96.1in)
• Deck Length: 4,880mm (192.1in)
  
  
• Overall Dimensions:
  • Width: 3,160mm (124.4in)
  • Length: 5,862mm (230.8in)
  • Height: 3,514mm (138.3in)
  • Weight: 12,000 kg
    
    
• Location: Western Canada

View More Horizontal Screens

Square D 2 Pole 50 Amp Breakers ID: 335435

• 2 Pole
• Amp: 50
• Volt: 120/240
• Style: Bolt On
• Type: QOB
• Single Phase
• 4 Units Available
• Location: British Columbia, Canada

View more Breakers

2012 Caterpillar 416F Backhoe ID: 179064

• Hours: 1920
• Engine Specifications
  • Net Power:  87.0 hp
  • Model:  Cat C4.4 ACERT DIT
  • Displacement 268.0 in3
  • Fuel type Diesel
• Backhoe specifications (standard)
  • Dig depth standard 14.3 ft.
  • Reach from swing pivot 18.42 ft.
  • Bucket rotation 205 degrees
  • Bucket dig force 12973 lb.
  • Loading height 11.9 ft.
  • Loading reach 6.0 ft.
• Loader specifications
  • Bucket capacity: 1.0 yd3
  • Width 7.42 ft
  • Dump height @ max angle 9.25 ft
  • Dump reach @ max angle 2.42 ft
  • Dig depth 3 in
  • Lift capacity 6751 lb
  • Bucket breakout force 107762 lb

• Please contact for more information

• View More Backhoes

Ingersoll-Rand 60NM-4C 2 Drum Electric Slusher ID: 171816

• SIZE: 60NM-4C.
• Rope pull: 6600 lbs.
• Average Rope Speed 300 feet per minute.
• 60 HP motor.
  • 575V.
  • 1725 rpm.
• Mounted on steel skid.

View more Double Drum Electric Slushers Hoists

Hoffman MicroSwitch ID: 1387580

Hoffman MicroSwitch

600V AC

• Location: Savona, British Columbia, Canada

Westinghouse 2 Pole 20 Amp FDB Breaker ID: 191558

• 600 VAC Max
• 250 VDC
• 2 Pole
• Cat #: FDB2020
• Quantity 1

View More 2 Pole 20 Amp Breakers

112.5 KVA 600-208Y/120 Volt - 3 Phase Marcus Transformer For Sale ID: 45042

• 112.5 KVA Marcus Transformer
• 600-208Y/120 Volt
• 3 Phase

Savona Equipment HD 10 x 20 Derocker ID: 185351

• Standard size: 10 ft. x 20 ft. (3 m x 6 m).
• Max Capacity: 200 TPH

Features:

• Made in Canada and available worldwide
• Most effective design for maximum throughput and gold recovery
• All components are extra heavy duty
• Removable hopper for ease of shipping
• Derocker can be transported level and raised to correct pitch once in place.

Specifications:

• Max Capacity: 200 TPH
• Size: 10 ft. x 20 ft. (3 m x 6 m).
• Water requirement: Approx 3,500 GPM (13,300 L/min).
• Diesel Hydraulic drive.
• Electric drive optional.
• Removable feed hopper included
• Discharge chute included
• All skid mounted
• Shipping Dimensions: (L x W): 22 ft. x 10 ft. 8½ in. (6.71 m x 3.26 m)
• Weight: 40,000 lbs / 18,200 kg.

Options Available:

• Custom sluice boxes
• Custom sized derockers
• Custom drive options

Ask Savona Equipment how we can help you with additional new or used equipment to complete your process.

View More Derockers

R.A Warren 4 Ton Battery Locomotive ID: 1013601

• 30 in. Rail Gauge 
• Solid State Control Hydraulic Brakes 
• No Battery Box
• Approx. Dimensions: 45 in. Wide x 145 in. Long x 45 in. High 
• Location: Western Canada

View more Locomotives

Marcus 45 kVA Transformer ID: 147091

• Marcus 45 kVA Transformer.
  • High voltage: 600V.
  • Low voltage: 120/208V.
    • 3 phase.
    • 60 Hz.
  • Indoor dry type.
  • Energy efficient.

• Shipping information:
  • Dimensions (L x W x H):
    • 19 in. x 30 in. x 30 in.
    • 48 cm x 76 cm x 76 cm.

Please contact us for more information.

7/8 in. Hex Drill Steel. Various Lengths. ID: 43511

7/8 in. Hex Drill Steel. Various Lengths.

40-foot generator/parts van ID: 45313

• Tandem axle with 5th wheel pin and landing gear.
• Air intake louvres at both ends.

Deister 72 in. x 14 ft. Vibrating Pan Feeder ID: 209333

• 72 in. wide.
• 14 ft. long.
• Type: VFB-7214
• Never used.

View more Vibrating Pan Feeders

Atlas Copco ROC D7-11 and ROC D7-RRC Drill Package ID: 1418455

Atlas Copco ROC D7-11 and ROC D7-RRC Drill Package

Quantity: 2 Drill Package

• Make: Atlas Copco 
• Models: ROC D7-11 and ROC D7-RRC
• Type:
  • D7-11: Quarry Drill
  • D7-RRC Radio Remote Control Rock Drill
• Years: 
  • D7-11: 2010
  • D7-RRC: 2006
• Hours:
  • D7-11:
    • Frame Hours: 8,050 Hours
    • Impact Hours: 2,874 Hours
  • D7-RRC:
    • Frame Hours:
    • Impact Hours:
• Condition: Used, Reported in Working Condition
• Comes with Spare Atlas Copco COP 1840 Drifter Drill
  
  
• ROC D7-11 General Model Specifications:
  • Rock Drill: Atlas Copco COP 1840
    • Impact Power: 20kW (26.8HP)
    • Hydraulic Pressure: 230 bar (3,335 PSI)
    • Impact Rate: 42-50Hz
    • Torque: 1,180Nm (870lbf/ft)
  • Hole Range:
    • T38, T45, T51 Drill Steel: 64-115mm (2½”- 4½”)
    • Hydraulic Rod Handling System for Max Hole Depth (with 3.6m (12’) Extension Rods)
      • T38, T45: 28m (92’)
      • T51: 21m (69')
  • Engine: CAT C7, Tier III/Stage 3
    • Power: 168kW (225HP) 
  • Feed: Hydraulic Cylinder Feed with Hose Guide and Double Drill Steel Support with Movable Lower Guide/Dust Hood
    • Feed Extension: 1,400mm (4 ’7’')
    • Feed Rate, Max: 0.92 m/s (184 ft/min)
    • Feed Force, Max: 20kN (4,400 lbf)
    • Tractive Pull, Max: 20kN (4,400 lbf)
    • Total Length: 7,140mm (23’ 5’’)
    • Travel Length: 4,240mm (14’)
  • Dust Collector: DCT 110D
    • Filter Area: 11m² (118ft²)
    • Number of filter elements: 11 pcs
    • Suction Capacity at 500mm W.G.: 560 l/s (1,200 CFM)
    • Suction Hose Diameter: 127mm (5’’)
    • Cleaning Air Pressure, Max: 7.5 bar (109 PSI)
    • Cleaning Air Consumption: 2-4 l/pulse (0.06 - 0.12 ft³/pulse)
  • Hydraulic System:
    • Anti-Jamming
    • Automatic Feed Force Control: RPC-F
    • Damper Pressure Control: Impact DPC-I
    • Hydraulic oil cooler - Max Ambient Temperature: 50°C (122°F)
      
      
• ROC D7-RRC Rock Drill General Model Specifications:
  • Recommended hole range for ROC D7
    • T38, T45: 64-115mm (2.5”- 4”)
    • Hole Depth: 28m (approx. 92’)
    • T51: 21m (69’)
  • Engine ROC D7: Caterpillar Water-Cooled Turbocharged Diesel
    • Model: CAT 3126B
    • Power: 149kW (203HP)
  • Hydraulic Rock Drill ROC D7:
    • Model: Atlas Copco COP 1840 Drifter
    • Impact Power, Max: 18kW (24.5HP)
    • Hydraulic Pressure, Max: 230 bar (3,335 PSI)
    • Torque, Max: 980Nm (724 lbf/ft)
    • Weight: Approx. 171kg
  • Boom: Folding Boom
  • Air Compressor ROC D7:
    • Make/Model: Atlas Copco Screw Compressor C106
    • Working Pressure, Max: 10.5 bar (152 PSI)
    • FAD: 105 l/s (215 CFM)
      • Or 127 l/s (270 CFM)
  • Fuel Tank Capacity: 280 liters (73 US Gal.)
  • Feed:
    • Feed Length, Total: 7,140mm (24’)
    • Travel Length: 4,240mm (15’)
    • Feed Extension: 1,400mm (4’ 3”)
    • Feed Rate, Max: 0.92 m/s (180 ft/min)
    • Feed Force, Max: 20kN (4,400 lbf)
  • Tramming:
    • Tramming Speed: 3.1 km/h (2 mph)
    • Traction Force: 110kN (25,000 lbf)
    • Hill Climbing Ability: 20° (30° with Winch)
    • Track Oscillation: ±12°
    • Ground Clearance: 455mm (17.5”)
  • Transport Dimensions:
    • Length: 10,710mm (35’ 2”)
    • Width: 2,370mm (7’ 10”)
    • Height: 3,100mm (10’ 2”)
    • Weight: 13,000 kg (29,300 lbs.)
      
      
• Location: Northwest USA

View More Quarry Drills

CIA Fuse Holder ID: 1394129

CIA Fuse Holder

30A

600V AC

CIA Fuses Only

• Location: Savona, British Columbia, Canada

Franklin Miller RM1010M Roll Crusher ID: 1260420

Franklin Miller RM1010M Roll Crusher

• Make: Franklin Miller
• Model: RM 1010M
• Rolls Diameter: 10in Diameter x 10in Long
• Infeed Hopper Dimensions:
  
  • Length: 25in
  • Width: 18in
  • Height: 23in
• Discharge Hopper Dimensions:
  • Length: 17in
  • Width: 23in
  • Depth: 8in
  • With 8in Diameter Discharge
• Drive Shive: 12in Dia x 1.75in Wide - 3 Groove
• Mounted on 2.5in x 2.5in Tubing Frame
  
  
• Overall Dimensions:
  • Length: 75in
  • Width: 48in
  • Height: 93in
    
    
• Location: Savona, British Columbia, Canada

View More Roll Crushers

U.S. Stoneware 4 ft. x 5 ft. Pebble Mill ID: 211432

• US Stoneware pebble mill.
• Serial No.: ZZ59123.
• Approximately 4 ft. diameter x 5 ft. long.
• Ceramic lined.
• Outboard roller bearings on stands.
• Comes with 10 hp motor drive.

View more Batch Mills 

Delta Industrial 30 in Knife Valve ID: 143922

• Delta Industrial Knife Gate Valve.
  • Model: V-0088.
    • Size: 30 in.
      • Seals: GFLT.
      • Class: 150.
      • Max. temperature: 400°F.
      • Body: CS.
  • Unit is reported in fair condition.

Please contact us for more information.

20,000 Gallon Steel Storage Tank ID: 54711

• Vertical style.
• 12 ft. dia. x 35 ft. tall.
• 3/16 - 1/4 in. steel wall with epoxy lining.
• Reinforced base with metal skirt.
• Last used to store milk.
• Has been cleaned out.
• Tank is in very good condition.

Spitznas SDS Plus Pneumatic Rotary Hammer Drill ID: 1398259

Spitznas SDS Plus Pneumatic Rotary Hammer Drill

Qty: 2 Units

• Make: Spitznas
• Model: 2 2404 0030
• Type: SDS Plus
• Condition: Used, Reported in "Like New" Condition
• Hammer Drill Mode for Drilling Holes in Concrete, Brick and Masonry
• Rotary Drilling Mode for Straight Drilling of Steel and Wood
• Built-in Oiler for Air Motor
  
  
• Specifications:
  • Blows/Minute (BPM): 0-3000 BPM
  • Drill Speed (RPM): 0-625 RPM
  • Power at 90 PSI: 0.7HP
  • Air Consumption at 90 PSI: 21 CFM
  • Tool System: SDS Plus
  • Max Drilling Diameter (Solid Bit Drilling Concrete): 1in
  • Max Drilling Diameter (Core Bit Drilling Concrete): 3in
  • Max Drilling Diameter (Twist Drill Drilling Wood):  3/4in
  • Dimensions: 16in x 8.5in x 4in
  • Weight: 11 Lbs.
    
    
• Location: Central Canada

View More Miscellaneous Drills

CCS Pressure Switch ID: 1367430

CCS Pressure Switch

Model:695GEAJ3

Proof 3000 PSIG

DECR: 320 PSI

• Location: Savona, British Columbia, Canada

Toshiba G7 10 HP VFD ID: 170246

• Input
  • 480 VAC
  • 16.5 Amps
  • 50/60 Hz
• Output
  • 480 VAC
  • 15 Amps
  • 0 - 400 Hz
• Cat #: VT130G7U4110B
• Serial #: A070109882
• Quantity 1

View More 10 HP VFDs

Westinghouse 2 Pole 20 Amp Bolt-On Breaker ID: 191322

• 240 VAC Max
• 2 Pole
• Bolt-on
• Type BA
• Quantity 1

View More 2 Pole 20 Amp Breakers

Falcon SB250 Centrifugal Gold Concentrator ID: 1381013

Falcon SB250 Centrifugal Gold Concentrator

• Make: Sepro Falcon
• Model: SB250
• Year: 2014
• Condition: Used, Reported in Very Good Condition
• Discharge: Automated
• Comes with Variable Speed Control and Electric Motor
• Recommended Solids Capacity: 1 - 10 TPH
• Approximate Max Slurry Capacity: 20m³/hr.
• Concentrating Surface Area: 0.17m²
• G-Force Range:
  • Upper: 200 G's
  • Lower: 50 G's
• Machine Weight: 269 kg
• Motor Power: 2.2kW (3.0HP)
• Process Water Consumption: 1.8-2.7 m³/hr.
• Continuous Water Supply Pressure: 2-3 bar
• Recommended Max Feed Particle Size: 2.0mm
• Absolute Max Feed Particle Size: 2.5mm
• Maximum Feed Percent Solids: 55-70%
• Concentrate Slurry Flush Volume: 50 Liters
• Concentrate Solids Flush Volume: 1,010cm³
• Dimensions:
  • Width: 1.04m
  • Length: 0.66m
  • Height: 1.02m
    
    
• Location: Europe

View More Gold Concentrators

Eriez 72 in. x 72 in. Self Cleaning Cross Belt Magnets ID: 524767

• Model: SE7920A
• Style: SC-2
• Magnet Voltage: 230 DC
  • 64 Amps
  • 14,811 Watts
• Belt Width: 66 in.
• Magnet Dimensions: 72 in. x 72 in.
• Magnet Height: 36 ¾ in. 
• Conveyor Length: 111 ½ in. 
• 2 Units Available
• Location: Eastern Canada

View more Belt Magnets

Martin Engineering 16 in. x 28 in. Vibro Screener ID: 211489

• Model: CD18.910.
• Approximately 16" wide x 28" long screen.
• Stainless steel construction.
• Single deck on stand.
• .35 kw Vibro Motor:
  • 230/460 volt vibro motor.
• Serial No.:974119.

View more Vibrating Pan Feeders

TMG 58 Breaker ID: 174355

• Model: TMG 58.
• Body weight: 155 kg.
• Operating pressure: 55 L/min.
• Impact frequency: 700 BPM.
• Product ID: JYNO.

Please contact us for more information.

View more Excavator Attachments

18in Dia. x 7ft Trommel Wash Plant ID: 1394383

18in Dia. x 7ft Trommel Wash Plant

Includes Trommel and Hopper/Feeder

• Trommel:
  • Size: 18in Dia. x 7ft Long
  • Capacity: 3 YPH
  • Screen Area: 4.5ft Long
    • Screen Spacing: 0.5in
  • Sluice Under Trommel
    • 14in Wide x 6.5ft Long
    • With Carpeting
  • Water Connection Sizes: 2in
  • Drive: Electric Motor
    • Power Output: 1 HP
    • Frequency: 60Hz
    • Phase: Single
  • Overall Dimensions:
    • Length: 11.5ft
    • Width: 5.5ft
    • Height: 6.5ft
      
      
• Hopper/Feeder
  • Hopper Dimensions:
    • Length: 4ft
    • Width: 6.5ft
    • Depth: 4ft
  • Capacity: Approx. 3 Yards
  • Grizzly Spacing: 3.5in
  • Conveyor: 12in Wide x 17ft Long
  • Drive: Electric Motor
    • Power Output: 0.75HP
    • Frequency: 60Hz
    • Phase: Single
  • Overall Dimensions:
    • Length: 18ft
    • Width: 7ft
    • Height: 7ft 4in
      
      
• Location: Northwest USA

View More Trommels

Sala 2 ft Vertical Sump Pump ID: 142453

• Sala Vertical Sump Pump.
  • Model: G-20-284-4.
    • 4 in. discharge.

Please contact us for more information.

GOULD One-Time 2 AMP fuse ID: 360816

2 AMP

600V or less

Cat#: NRS2

Length: 5"

Maintenance/utility car. 16 feet long X 4 feet wide. On 24 in. track guage. Comes with 2 open comparments and 1 multible shelved comparment. All with hinged front doors. ID: 43795

Maintenance/utility car. 16 feet long X 4 feet wide. On 24 in. track guage. Comes with 2 open comparments and 1 multible shelved comparment. All with hinged front doors.