Humphreys 24A Spirals ID: 47125

• Bank of 3.
• Cast steel.
• Unit is in very good condition.

General Electric 30 HP Motor ID: 175124

• 480V.
• 885 rpm.
• Frame: 364T.
• 45 A.
• TEFC enclosure.

View More 30 HP Electric Motors

SALA 1.5in. Vertical Tank Pump ID: 295490

• Type: SPV 180-1 1/2
• 1.5 in. Discharge
• Rubber Lined Bowl
• Vertical motor base
• Belt guard
• Location: Western Canada

View more Vertical Tank Pumps

Skyway Electric 45 kVA Transformer ID: 88866

• High voltage: 480.
• Low voltage: 440y/254 volt.
• Three phase.
• 500 lbs.

Gardner Denver RB83 Stoper Drills ID: 45159

Gardner Denver Stoper Drills

• Model: RB83 
• Complete with Steel Retainer
• 7/8" Chuck
• Standard Feed Leg
• Air Consumption: Approx. 180 CFM @ 90 PSI

Qty. 20

Located in Savona BC, Canada.

View More Stoper Drills

2014 Komatsu WA470-7 Wheel Loader ID: 218668

• • Net Horsepower: 272 HP @ 2000 rpm.
  • Operating weight: 52,889-53,308 lbs.
  • Bucket Capacity:
    • 5.0-5.75 yd3
    • 3.8-4.4 m3.
  • Large capacity torque converter:
    • 8% lower fuel consumption.
    • Lock-up in 2^nd, 3^rd, and 4^th
  • Komatsu SAA6D125E-6 engine.
    • EPA Tier 4 Interim certified.
  • Fully enclosed cab.
    • Operator seat with EPC (electronic pilot control) levers.
  • Rearview monitoring system.
  • Remote boom and bucket positioners.
    • Can set kick-outs from inside the cab.
  • Variable displacement piston pumps with CLSS.
  • Komatsu auto idle shutdown.
  • Located: Eastern U.S.A.
  • Contact for additional details.

 View more Wheel Loaders

Garlock 72 ft. x 18 in. Portable Conveyor ID: 447183

• Corrugated Belt
• Wear Strips Installed to Protect the Belt
• Units well Maintained
• Complete with 
  • Onan Engine
  • Drums
  • Rollers
  • Lights
  • Switches
  • Hoses
  • Cylinders
  • Brakes
• Location: Eastern USA

View more Portable Conveyors

MBMM 12 in. x 12 ft. Screw Classifier ID: 635285

• Condition: New Surplus – Unused
• Screw Diameter: 12 in.
• Length: 12 ft.
• Includes TEFC Electric Motor
• Robust Construction
• All Bearings out of the slurry
• Dual purpose as a dewatering screw
• Inclined to elevate heavier material to an elevated discharge point.
• Located: Western USA

View more Classifiers and Sandscrews

Eriez SE-7930 Suspended Electromagnet ID: 1228445

Eriez SE-7930 Suspended Electromagnet

• Make: Eriez
• Model: MC-2, SE-7930
• Style: 9944745
• Type: Suspended
• Voltage: 230 Volts
• Amperage: 53.3 Amps
• Watts: 14,811W
• Frequency: DC
• Includes Controller
• Manual Cleaning
  
  
• Box Dimensions:
  • Length: 72in
  • Width: 72in
  • Height: 37in
    
    
• Location: Western Canada

View More Magnets

New York 2610 High Pressure Blower ID: 1097723

New York 2610 High Pressure Blower

• Wheel Size & Type
  • 2610 Open
  • Dimensions: 26" Diameter x 4" Wide
    
    
• Inlet
  • 8" Diameter
  • 8 Bolt Flange
    
    
• Outlet
  • 10" Diameter
  • 8 Bolt Flange
    
    
• Motor
  • WEG TEFC 3 Phase
  • 20 HP
  • 480 Volts
  • 2935 RPM
    
    
• Location: British Columbia, Canada

View More High Pressure Blowers

3000kVA Eaton Distribution Transformer ID: 1424540

3000kVA Eaton Distribution Transformer

• Make: Eaton Cooper Power Series
• Category: 0000CA70F8YS
• Year: 2020
• Condition: Unused - Placed on Pad, Never Connected
• Type: Distribution Transformer
• Style: Liquid Filled
  • Fluid:  Envirotemp™ FR3™
  • Gallons: 660 Gal
• High Voltage: 24,940 Volts
  • High Voltage Current: 69.4 Amps
• Low Voltage: 600Y/347 Volts
  • Low Voltage Current: 2,890 Amps 
• Frequency: 60Hz
• Phase: 3-Phase
• Weight: 17,910 Lbs.
  
  
• Location: Western Canada

View More Distribution Transformers

Proline 6 in. Dredge Package ID: 385930

• Engines: 2 x 9 HP Honda
• Pumps: 2 x 500 HPs
• Sluice Box: 22 in. x 72 in. 
• Dredge Hose: 6 in. x 20 ft.
• Pressure Hose: Two 2 in. x 90 in. 
• Intake Hose: Two 3 in. x 48 in. 
• Flotation: 4 Polyethylene Floats 
  • 16 in. x 62 in. x 100 in. 
• Capacity: Up to 20 Cubic Yards Per Hour
• Location: Western Canada

View more Dredges

6ft Dia. x 16ft Storage Silos ID: 1353322

6ft Dia. x 16ft Storage Silos

Quantity: 3 Units

• Capacity: 493ft³ (Approx.)
• Condition: Unused Condition - Never Held Material
• Year: 2015 Approx.
• Diameter: 6ft
• Height: 16ft
• Cone: 4ft Cone Section
• Discharge: 6in Discharge
• Construction: 0.25in Plate (¼ inch) Carbon Steel
• Painted Inside and Outside
  
  
• Location: Western Canada

View More Silos

Edem 18 in. x 30 ft. Vibrating Conveyor ID: 728340

• 18 in. wide x 30 ft. long.
• 11 in. high sides.
• Mounted on steel beam frame.
• 7.5 hp electric motor.
  • 575 volt, 1740 rpm.
• Fibreglass section for metal detector.
  • With Rens A10-36 Metal detector.

View more Vibrating Conveyors 

Sylvania 1 Pole 15 Amp Breaker ID: 335595

• 1 Pole
• Amp: 15
• Volt: 120/240
• Style: Bolt On
• Type: CB
• Single Phase
• Location: British Columbia, Canada

View more Breakers

Horizontal 3000 hp Synchronous Electric Motor ID: 144363

• 4,000V.
• 360 rpm.
  • 3 phase.
  • 60 Hz.
• Frame: 20U7220.
• Class I GR B&D Div. II.
• Stored indoors. 

Please contact us for more information.

Taylor Dynamometer Pump Control Panel ID: 1404274

Taylor Dynamometer Pump Control Panel

• Make: Taylor Dynamometer
• Model: 0710-F11030
• Serial: 1021-0097WR
• Year: 5/24/2010
• Condition: Used Condition
• Voltage: 480 Volts
• Current: 225 Amps
• Frequency: 60Hz
• Phase: 3-Phase
• HP/kW: 115HP (85.7kW)
• Enclosure Type: 12
• Siemens Size 2 and 3 Magnetic Contactors 
• Siemens FD63F250 3-Pole Breaker with 225 Amp Adjustable Trip
• NEMA 3R Enclosure with Breaker Disconnect Handle
  
  
• Overall Dimensions:
  • Length: 40in
  • Width: 24in
  • Depth: 12in
    
    
• Location: Savona, British Columbia, Canada

View More Control Panels

Delta 112.5 kVA 4160 - 600V Transformer ID: 110885

• Delta 112.5 kVA Transformer.
  • 4160V.
  • 600Y/347.
  • 60 Hz.
  • 3 Phase.

• Please contact us for more information.

GPM SBLH4S15-6T5 Submersible Slurry Pump ID: 1422380

GPM SBLH4S15-6T5 Submersible Slurry Pump

• Make: GPM
• Model: SBLH4S15-6T5
• Condition: Used Condition
• Flow Rate: 300GPM
• Head: 40ft
• Discharge: 4in Diameter
• Suction: 6in Diameter
• Impeller Style: Semi-Open

• Power Output: 15HP (11kW)
• Rotation Speed: 1,200RPM
• Voltage: 575 Volts
• Current: 17 Amps
• Frequency: 60Hz
• Phase: 3-Phase
• Pole: 6
• Location: Western Canada

View More Submersible Pumps

7.5 HP Dry Rotary Vacuum Pump ID: 971335

• Model: M 1124
• HP: 7.5
• CFM: 50
• 1800 RPM 
• Voltage: 480 Volt 
• 3 Phase
• Location: Western, Canada

View more Vacuum Pumps

78in Wide x 240in Long Vibrating Pan Feeder ID: 1401026

78in Wide x 240in Long Vibrating Pan Feeder

• Size: 78in Wide x 24in Long
• Condition: Used, Reported in Good Condition
• Mounted to I-Beam Frame
  
  
• Drive: Electric Motor
  • Make: Toshiba
  • Power Output: 20HP
  • Voltage: 575 Volt
  • Frequency: 60Hz
    
    
• Location: Central Canada

View More Vibrating Pan Feeders

Beaver 15 kVA Isolation Transformer ID: 147007

• Beaver 15 kVA Isolation Transformer.
  • High voltage: 480 Delta.
  • Low voltage: 208Y/120V.
    • 3 phase.
    • 60 Hz.
  • Type 2 enclosure.

• Shipping information.
  • Dimensions (L x W x H):
    • 14 in. x 20 in. x 18 in.
    • 36 cm x 51 cm x 46 cm.
  • Weight:
    • 200 lbs / 91 kg.

Please contact us for more information.

13 ft. Bucket Elevator ID: 563295

• Length Distance Between Inlet & Discharge: 13 ft.
• Enclosure Width: 14 in.
• Type: Chain
• Inlet Dimensions: 15 in. x 26 in.
• Discharge Dimensions: 12 in. x 15 in.
• Base to Center of Inlet: 4 ft. 3 in.
• Base of Center of Discharge: 16 ft. 8 in.
• Bucket Size and Makeup: 8 in. x 6 in. Steel
• Bucket Spacing: 11 in.
• Drive: Leeson Wattsaver
  • 5 hp
  • 208-230/460 Volt
  • 1755 RPM
• Reduction: Dodge 
  • Size: TXT2A
• Overall Dimensions:
  • 7 ft. x 34 in. Wide 
• Location: British Columbia, Canada

View more Bucket Elevators

Caterpillar 95 kW 277-480 Volt Diesel Generator ID: 935048

• Voltage: 277/480
• Condition: New Surplus 
• Engine Model: C4.4 DITA 
• Engine: C4.4
• Panel 
  • Auto Start 
  • Safety Shutdowns 
• 60 Hz
• 3 Phase
• Location: USA

View more Generators

Baldor H4 10 HP VFD ID: 187839

• Input
  • 460 VAC
  • 50/60 Hz
• Output
  • 460 VAC
  • 0 - 400 Hz
• Cat #: ID15H410-E
• Quantity 1

View More 10 HP VFDs

Siemens 400 Amp HD Fusible Disconnect ID: 195665

• Catalog Number: F-355.
• Series: B.
• Type: 1.
• Vacu-Break Switch with Clampmatic Contacts.
• 600 VAC. 
• Fusible and comes with fuses.

View more 400 Amp Disconnects 

Kolberg Sand Plant ID: 1179472

Kolberg Sand Plant

• Make: Kolberg
• Type: Complete Sand Plant
• Year: 2009
• Condition: Used
  
  
• Included:
  • One JCI 3-Deck Inclined Screen
    • Configured For Urethane Panels
    • Complete with Support Structure, Dredge Feed Box, Discharge Chutes, Walkways Around Screen and Stairway From Tanks to Screen Structure
      
      
  • Two KPI 12ft x 48ft Classifying Tanks
    • Complete with RC Pump, Control System, Structure with Stairway From Ground to Tank Level
      
      
  • Three KPI 54in Twin Fine Material Washer
    • Model: 5054-34T
    • Spiral Diameter: 54in
    • Max Raking Capacity: 500 TPH
    • Max Overflow Capacity: 3,200 US GPM
      
      
  • One KPI 54in Single Fine Material Washer
    • Model: 5054-34S
    • Spiral Diameter: 54in
    • Max Raking Capacity: 250 TPH
    • Max Overflow Capacity: 1,800 US GPM 
      
      
  • Two KPI 30in x 120ft Conveyors
    
    • Power Travel and Walkways Up One Side
      
      
  • Two KPI 36in x 120ft Conveyors
    • Power Travel and Walkways Up One Side
      
      
  • Electrical Control House
    • Complete With Office With Entry Door
    • Windows On Three Sides To Observe Plant Operation
    • Control Panel With Controls For Both Classifying Tanks 
    • Switch Gear Room With MCC Controls For All Plant Electrical Operations
      
      
• Location: Central USA

View More Wash Plants

Crushing and Concentrating Package ID: 1356750

Crushing and Concentrating Package

• Consisting of:
  • 20in x 10in Gibson Mill
  • 4.5in Denver Jaw Crusher
  • Wilfley Lab Concentrating Table
  • All Motors and Control
    
    
• W.W. Gibson Combination Elliptic Roll and Ball Mill
  • Size: 24in Dia. X 18in Long
  • Feed: Spout Feed
  • Capacity: 12 Ton 
  • Drive: 5HP Electric Motor
  • Mounted on Stand with Overhead Motor Mount
  • Will Take the Mine Run of Ore, Crush Grind and Classify in a Single Pass
  • Horsepower Consumption Over 1/3 Less than Ordinary Ball Mills
    
    
• 4.5in Denver Fire Clay Jaw Crusher
  • With 3 or 5 HP Motor
    
    
• Wilfley 13-B Oversize Lab Table
  • Size: 24in x 50in Deck
  • Stroke: 0.25-0.5in (6-13mm)
  • Stroke RPM: 250-350
  • Max Capacity: 250 Lbs. Per Hour
  • With Table Support and Head Motion
  • In Good Condition
    
    
• General Electric 5HP Induction Motor with Controls
  • Voltage: 230/460 Volt
  • Current: 13.4/6.7 Amps
  • Speed: 3500 RPM
  • Frequency: 60Hz
  • Start/Stop Button
  • Circuit Breakers - 30 Amp, 3-Pole
    
    
• Location: Southwest USA

View More Crushing Plants

DSI 8 in. Gate Valves ID: 992644

• Size: 8 in. 
• Body: WCB
• Stem: CR13
• ASME: 150
• Disc: CR13
• Seat: HF
• 8 Bolt Flange 
• Qty: 2
• Location: British Columbia, Canada

View more Gate Valves

Siemens 3 Pole 20 Amp Bolt-on Breaker ID: 164741

• 240 VAC
• 3 Pole
• Cat #: BQ3B020
• Type: BQ HACR
• Bolt-on
• Quantity 1

View More 20 Amp Breakers

Hoist Type cement bucket. 5.5 yard. Air activated clam shell discharge ID: 42206

Hoist Type cement bucket. 5.5 yard. Air activated clam shell discharge

8 ft. x 16 ft. Site Washroom Container ID: 866030

• Length: 16 ft. 
• Width: 8 ft. 
• Complete with 
  • 4 x Sinks
  • 2 x Urinals 
  • 1 x Toilet 
  • Storage Compartment 
• Location: Western Canada

View more Buildings

Keene 3in Dredge and Accessories Package ID: 1392473

Keene 3in Dredge and Accessories Package

• Make: Keene
• Size: 3in
• Type: Dredge
• Keene 3in x 4in Centrifugal Pump Connected to Motor
• Honda 9.0HP GX270 Gas Engine
• Thomas 80AX33-875B Oil-Less Compressor
• Venturie with:
  • 4in Inlet
  • 4in Outlet
  • 2in Water In Line
• 3in x 18ft Product Suction Hose
• 3in x 20ft Water Suction Hose
• Sluice Box
  • Dimensions: 18in Wide x 48in Long
  • Equipped with Miner's Moss
• Floats:
  • Quantity: 4 Floats
  • Dimensions: 43in L x 16in W x 14in H
• Briggs & Stratton 319cc Engine
  • Fuel: Gas
  • Pump: Keene 3in x 4in Centrifugal Pump
  • Compressor: Thomas 80AX33-875B Oil-Less Compressor
• 3in Continental Red Lay-Flat Hose
  • Quantity: 2 Units
  • Equipped with Male/Female Quick Connect Ends
• 3in Challenger Lay-Flat Hose
  • Quantity: 2 Units
  • 1 Has Male/Female Quick Connect Ends
    • Length: 25ft
  • 1 Has No Ends
    • Length: 27ft
• 1in Garden Style Hose
  • Length: 50ft
• Spare Inlet with Strainer
• Keene Air Floats
  • Quantity: 2 Units
  • Dimensions: 8in Dia. x 20in Long
• Vac-Pack 5 Gallon Bucket with 25cc Weedwacker Engine
  • Inlet Hose: 1.5in Dia. x 5ft Long
  • Outlet Hose: 2.5in Dia. x 5ft Long
• Wetsuit
  • Includes: Suit, Hood, Gloves, Socks, Boots
• Weight Belts:
  • (12) Go Walking Belt Weights
  • (2) Lead Belt Weight
• Tool Box with Misc. Tools
  
  
• Location: Savona, British Columbia, Canada

View More Dredges