Wanted EquipmentFinancing - Apply now

Equipment Quotes

General Electric 600 HP Electric Motor ID: 877580


  • Voltage: 2300 Volt 
  • Horse Power: 600
  • RPM: 1800
  • Frame: 588US
  • Location: Eastern Canada

View more Electric Motors

Siemens 200 Amp Disconnect ID: 1414909


Siemens 200 Amp Disconnect

  • Make: Siemens
  • Model: ID364NF
  • Type: Disconnect
  • Style: Non-Fusible
  • Current Rating: 200 Amp
  • Voltage Rating: 600 Volt
  • Poles: 3-Pole
  • Enclosure: NEMA 1

  • Location: Savona, British Columbia, Canaday esta 

View More 200 Amp Disconnects

Bonfiglioli Speed Reducer Package ID: 147271


  • Speed Reducer Package.
    • Consists of:
      • Bonfiglioli Speed Reducer.
        • Model: VF185.
        • Ratio: 200:1.
      • Marathon 1 hp electric motor.
        • 230/460V.
        • 1,200 rpm.
          • 3 phase. 
          • 60 Hz.
        • Inverter duty.
    • Gearbox and motor never used since purchased NEW in 2009.

 

Please contact us for more information.

Aurora 411 BF Horizontal Split Case Pump ID: 145765


  • Type: 411 BF.
  • 5" X 6" X 17" Impeller.
    • 1200 GPM.
    • 192 ft/head.
    • Equipped with:
      • 100 hp electric motor.
        • 230/460V.
        • 1,800 rpm.
          • Frame: 404T.
        • Continuous duty.
  • 4 units available.

 

Please contact us for more information.

Square D 60 Amp Non-Fusible Disconnect ID: 1075144


Square D 60 Amp Non-Fusible Disconnect

  • Make: Square D
  • Type: Non-Fusible
  • Current: 60 Amp 
  • Voltage: 600 Volt 
  • NEMA 3R Enclosure 
  • Comes with Start/Stop Button in Door

  • Location: Savona, British Columbia, Canada

View more Disconnects

AMP-TRAP AJT40 ID: 992301


Amp-trap

ajt

40amp

time delay

General Electric 40 HP Motor ID: 155381


  • 460V.
  • 3,565 rpm.
    • 3 phase.
  • Frame: 324TS.

 

Please contact us for more information.

View more 40 HP Motors

. Ingersoll-Rand 1-P86 Pavement Breaker ID: 41839


  • Ingersoll-Rand Pavement Breaker.
  • Model 1-P86.
  • 1-1/8 in. Chuck.

Telsmith 2540 Jaw Crusher ID: 1200492


Telsmith 2540 Jaw Crusher

  • Make: Telsmith
  • Model: 2540 Pegson
  • Year: 2009
  • Condition: Operational, Repowered
  • Toggle: Single
  • Frame Style: Single Piece
  • Max Feed Size: 22in
  • Min/Max Discharge:
    • Min: 2.5in
    • Max: 7in
  • Max Capacity: Up To 217 Discharge (Up To 444 TPH@7in Discharge, Short Toggle)

  • Drive: 150HP Motor Included

  • Overall Dimensions:
    • Length: 107in
    • Width: 90.75in
    • Height: 89in
    • Weight: 35,515 Lbs.

  • Additional Information:
    • Jaw has been Repowered

  • Location: South America

View More Jaw Crushers

Perrin 30 in. x 30 in. Plate Filter ID: 70332


  • 11 - Lenser plate elements.
  • 10 - Lenser frame elements.
    • 2" Thick.
  • Approx. 6.6 cubic feet of cake volume.
  • Quincy series TH3 - 6 X 20 Hydraulic closing cylinder.
  • Air over hydraulic manual controls.

General Electric 600 Amp Breakers ID: 160008


  • 600 Amp frame.
  • Adjustable trip.
  • Quantity: 3.

 

Please contact us for more information.

View more 600 Amp Breakers

Manufacturer:GENERAL ELECTRIC

2008 Stamford 300 kW Gen Ends ID: 223799


  • Frame/Core: HCI434E1L-0080E.
  • KVA Base Rate: 375.
  • kW Base Rate: 300.
  • Hz: 60.
  • RPM: 1800.
  • Volts: 480.
  • Ph: 3.
  • Amps Base Rate: 451.
  • PF: 0.8.
  • Rating: Continuous.
  • Volts: 40.
  • Ex Amps: 2.00.
  • Ambient Temp C: 40.
  • Enclosure: IP22.
  • Insulation Class: H:UL1446.
  • Quantity: 4.
  • Location: Central U.S.A.

 View more 300 kW Generators

Manufacturer:Stamford

Caterpillar 14M Motor Grader ID: 196879


  • Engine:
    • Make Caterpillar.
    • Model C11 ACERT VHP.
    • Net Power Gear 1-2 259 hp/193 kw.
    • Net Power Gear 3-4 274 hp/204 kw.
    • Power Measured @: 1800 rpm.
    • Net Power Gear 5-6: 274 hp/204 kw.
    • Number of Cylinders: 6.
    • Net Power Gears 7-8: 274 hp/204.3 kw.
    • Max Power: 274 hp/204.3 kw.
    • Displacement: 677 cu in/11.1 L.
  • Operational:
    • Front Axle Std Operation Weight: 12611 lb/5720 kg.
    • Rear Axle Std Operation Weight: 34522 lb/15659 kg.
    • Total Std Operation Weight: 47133 lb/21379 kg.
    • Front Axle Max Operation Weight: 21912 lb/9939 kg.
    • Rear Axle Max Operation Weight: 44086 lb/19997 kg.
    • Total Max Operation Weight: 65998 lb 29936 kg.
    • Fuel Capacity: 130 gal/492 L.
    • Cooling System Fluid Capacity: 12.3 gal/46.5 L.
    • Hydrauilc System Fluid Capacity: 15.9 gal/60 L.
    • Transmission Fluid Capacity: 23.5 gal/89 L.
    • Circle Gearbox Fluid Capacity: 1.6 gal/6 L.
    • Tandem Case Fluid Capacity (each): 25.5 gal/96.5 L.
  • Transmission:
    • Type: direct drive, power shift, countershaft.
    • Number of Forward Gears: 8.
    • Number of Reverse Gears: 6.
    • Max Forward Speed: 31 mph/49.8 km/h.
    • Max Reverse Speed: 24.5 mph/39.4 km/h.
  • Steering:
    • Articulation L/R: 20 degrees.
    • Turning Radius: 25.9 ft in/7.9 m.
  • Front Axle:
    • Wheel Lean: 17.1 degrees.
    • Oscillation: Total 32 degrees.
  • Hydraulic System:
    • Pump Type: variable displacement.
    • Pump Flow: 74 gal/min;280 L/min.
    • Relief Valve Pressure: 3500 psi/24150 kPa.
  • Moldboard:
    • Moldboard Width: 14 ft in/4267 mm.
    • Moldboard Height: 27 in/688 mm.
    • Moldboard Thickness: 1 in/25 mm.
    • Max Depth of Cut: 17.3 in/438 mm.
    • Left Side Shift: 29.1 in/740 mm.
    • Right Side Shift: 31.1 in/790 mm.
    • Blade Pull at Max Weight: 39678 lb/17997 kg.
    • Blade Down Pressure: 38666.9 lb/17539 kg.
  • Circle:
    • Diameter: 71.8 in/1822 mm.
    • Shift Left: 25.5 in/650 mm.
    • Shift Right: 20.5 in/520 mm.
    • Max Reach Outside Tires: Left 85.4 in/2169 mm.
    • Max Reach Outside Tires: Right 89.7 in/2279 mm.
    • Max Lift Above Ground: 16.5 in/419 mm.
    • Front Blade Tip Angle: 40 degrees.
    • Reart Blade Tip Angle: 5 degrees.
  • Dimensions:
    • Height to Top of Cab: 11.6 ft in/3535 mm.
    • Overall Length: 30.9 ft in/9412 mm.
    • Width Over Tires: 9.2 ft in/2791 mm.
    • Wheelbase: 21.5 ft in/6559 mm.
    • Blade Base: 9.3 ft in/2842 mm.
    • Tandem Axle Wheelbase: 5.4 ft in/1656 mm.
    • Rear Ground Clearance: 1.3 ft in/383 mm.
  • 7 shank ripper blade.
  • 4 shanks fitted.
  • Full ROPS cab.
  • Hours: 9700.

View more Graders

Manufacturer:CATERPILLAR

Hayward Gordon HRFX-30-612 Mixers ID: 1045963


  • Model: HRFX-30-612
  • Shaft Length: 72 in. Long 
  • High-Shear Radial Flow Impeller: 24 in. Dia.  
  • Teco Westinghouse 3 HP Motor 
    • Voltage: 460 
    • RPM: 755
    • Frame: 182T
    • 3 Phase 
    • 60 Hz
  • Sew-Eurodrive Gearbox 
    • Type: RF67 AM182
    • 1750/152 RPM 
    • 11.54:1 Ratio 
  • Complete with Vibraswitch Malfunction Detector Switch 
    • Model: 366

  • Location: British Columbia, Canada

View more Mixers

Browse Equipment Remove AllSubmit Quote
First Name
Last Name
Email Address
Phone
Questions, Information and Comments
Project Location

Additional Information

Additional information is helpful to make sure we provide you with the best service possible. However it is not required

Company
Address
City
Country
State / Province
ZIP Code
Website
Ore / Material
Tons Per Hour