Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Cleaver Brooks CB-700-400 Firetube Boiler ID: 163895
- 400 HP.
- Model: CB-700-400.
- Serial no: L90916.
- Generates steam at 150 psi.
- Natural gas fired with full gas train and gas regulator mounted.
- Boiler includes CB Hawk programmer system.
- McDonnel Miller modulating feedwater assembly.
- Bottom blow-down valves.
View more Boilers
Cummins 800 kW Diesel Generator ID: 137916
- Cummins 800 kW Diesel GenSet.
- Model: QST-30.
- 1000 hp @ 1800 rpm.
- 277/480V.
- 3 phase.
- 1000 hp @ 1800 rpm.
- Equipped with:
- Sound attenuated enclosure.
- Power command generator control panel.
- Auto start/stop control.
- Electronic governor control.
- Isochronous certification EPA tier 1.
- Voltage regulator control.
- PMG low coolant level shutdown run relays.
- 3PDT alternator heater.
- 120 VAC control cabinet heater.
- 120 VAC acoustical control insulated encloure.
- Model: QST-30.
Please contact us for more information.
Atlas GA250-10 Compressor ID: 126489
- Atlas GA250 - 10 Compressor.
- 2 available.
- Oil injected screw type.
- Motors: ABB HXR 355 LB-4.
- 250 kW.
- 3300V.
- 50 Hz.
- Main motor and compressor elements flexibly mounted on base frame.
- Integrated suction silencer.
- Weather proof & acoustic enclosures.
- Base frame sandblasted to SA2.5.
- Special coating and painting according to EN ISO 12944-02.
- Air-cooled after cooler.
- Condensate separator and drainage.
- Lubrication system.
- Oil filters.
- Air cooled oiler.
- Three step oil seperating system.
- Electronic control system.
- Compressors are rated for minimum ambient temperature of -20°C (-4°F).
- 2 available.
Please contact us for more information.
20 in. x 20 ft. Flat Channel Conveyor ID: 1063450
20 in. x 20 ft. Flat Channel Conveyor
- Dimensions: 20in Wide x 20ft Long x 18in High
- Head Pulley
- Steel
- 3.5in Diameter x 17in Long
- Tail Pulley
- Steel
- 3.5in Diameter x 17in Long
- Belt
- 16in Wide
- Horseshoe Pattern
- Motor and Gearbox
- Motor: Ironhorse TEFC 3 Phase
- 0.75 HP
- 230/460 Volt
- 1725 RPM
- Frame: 56C
- Ironhorse Worm Gear
- Ratio: 40:1
- Model: WGA-50M-040-H1
- Motor: Ironhorse TEFC 3 Phase
- Location: British Columbia, Canada
View more Channel Conveyors
Goldlands Hybrid 30 Ton Wash Plant ID: 178383
- Capacity: 30 tons/hr depending on material.
- Adjustable vibrating hopper/feeder.
- Grizzly trommel wash section.
- Three interior classifiers.
- Adjustable controls.
- 2 nugget traps.
- Drop down Vibro Pulse concentrators.
- Water mounted.
- Skid mounted.
View more Gold Wash Plants