Positive Displacement Pump. Model: C6DB-137. ID: 44183

• IMO Three Screw Pump
• Series 6
• Model: C6DB-137.
• Output Pressure:
  • 1500 PSI
  • 103 BAR
• Capacity Range:
  • 7 - 28 GPM
•  Speed Range:
  • 1150 - 3500 RPM
• 2 Units Available
• Location: BC Canada.

Wemco 190 Flotation Mechanisms ID: 83479

• 1500 Cu Ft Cells.
• Guarding included.
• Spare shaft & bridge assembly.
• 2 units available.

Midwest 4CT18 ID: 1075444

Type: 4CT18

800:5

Current Transformer

2VA

Cycles: 25-400

11.5 Cubic meter Membrane Filter Press for Sale ID: 51213

• 11.5 cubic meter membrane filter press.
• New and unused. 
• 110 plates made with 100 percent virgin polypropylene.
• Dual feed and dual cylinder.
• Max feed pressure of 300 PSI.
• Unit can cycle up to four times per hour.
• Mine duty construction.
• Auto plate shifting and core blow.
• 4 corner filtrate collection and side tapped with stainless filtrate collection troughs.

Universal 16ft. Chain Bucket Elevator ID: 402853

• Model: U1
• Dodge Shaft Mounted Reducer
  • Class I Operation
• 3 Phase
• 60 Hz
• 230/460 Volt
• TEFC
• Premium Efficiency
• Spout Hopper
  • Narrow Inlet
• 6in. x 4in. 18 Gauge Steel Buckets
• Location: Eastern USA

View more Bucket Elevators

15ft³ Pug Mixer ID: 1234161

15 Cubic Foot Pug Mixer

• Make: Crossman Machinery Company
• Type: Pug Mill
• Size: 2ft x 2ft x 5ft Wide Open Top Mixer
• Heavy Duty Mixer Shaft and Paddles
• Chain Driven through a Right Angle Reducer and Electric Motor
• Mounted 3.5ft High Legs
• With Manual Slide Discharge Gate
  
  
• Location: Savona, British Columbia, Canada

View More Various Cement Equipment

Montabert H-70 Hydraulic Drifter Drill ID: 705339

• Shank: 7/8 in. x 108 mm
• Weight: 40 kg 
• Length: 585 mm 
• Profile Height from Rod Center: 56 mm 
• Rotation Rate: 0- 350 RPM Independent, Reversible Rotation 
• Impact Rate: 80 Hz @ 150 Bar 
• Rotation Torque: 90 Nm @ 120 Bar 
• Hydraulic Requirements 
  • Percussion Pressure: 120 - 150 Bar
  • Oil Flow: 60 - 70 L/Min @ 120 - 150 Bar
  •  Viscosity: Range: 60 - 30 CST 
  • Air Flushing:
    • Air Consumption: 600 - 950 L/Min @3/5 Bar
    • Relief Valve Set: 7 Bar
    • Shank Lubrication: Standard 
  • Water Flushing:
    • Water Consumption: 5 - 10 L/min 
    • Water Pressure: 2 - 6 Bar 
    • Air Consumption: 200 - 300 L/Min @ 3-5 Bar 
  • Flushing Pipe Diameter: 5 mm
• Location: British Columbia, Canada

View more Drifter Drills

JLG 1255 Zoom Boom ID: 1005749

• Model: 1255
• Hours: 3662
• Year: 2015
• Fuel Type: Diesel 
• Cab: Heat & AC
• Carriage Width: 72 in.
• Forks: 72 in. Pallet
• Tires: Foam Filled 
• Location: Eastern USA

View more Zoom Booms

Caterpillar 416C Loader Backhoe ID: 123315

• Caterpillar 416C Loader Backhoe.
  • Year: 1997.
  • Hours: 11693.
  • Comes with:
    • Extendahoe.
    • 24 in. digging bucket.
    • Clean up bucket.
  • Also available.
    • Ditching bucket.
    • Frost bucket.

Please contact us for more information.

2016 Sandvik LH204 Scooptram ID: 1424352

2016 Sandvik LH204 Scooptram

• Make: Sandvik
• Model: LH204
• Year: 2016
• Hours: 3,644 Hours
• Condition: Used, Reported in Good Condition
• Canopy: ROPS/FOPS

• General Model Specifications: 
  • Capacities:
    • Tramming Capacity: 4,000kg (8,820lbs)
    • Tipping Load: 10,350kg (22,800lbs)
    • Standard Bucket: 2.0m³ (2.6yd³)
  • Engine: Deutz BF4M2012C Diesel Engine
    • Power Output: 95kW (125HP) @2,500RPM
    • Torque: 445Nm @1,500RPM
    • Cylinders: 4, Inline
    • Displacement: 4.04L (247in³)
  • Bucket Motion Times: 
    • Raising Time: 4.8 Seconds
    • Lowering Time: 3.4 Seconds
    • Dumping Time: 3.9 Seconds
  • Turning Radius: 
    • Turning Angle: 42°
    • Inner: 2,886mm (114in)
    • Outer: 5,153mm (203in)
  • Overall Dimensions: 
    • Length: 7,766mm (306in)
    • Width: 1,600mm (63in)
    • Height with Canopy: 2,127mm (84in)
    • Weight: 13,950kg

• Can have Ejector Bucket Installed for Additional Cost

• Location: Western Canada

View More Scooptrams

Volvo 417 kW 400 Volt Diesel Generator ID: 1053308

• Voltage: 400 Volt 
• Hours: 614
• Volvo Engine 
  • Model: TAD1631GE 
• Marelli Alternator 
• 1500 RPM 
• 50 Hz 
• Skid Mounted 
• Radiator Cooled 
• Electronic Governor 
• Base Fuel Tank 
• Water Jacket Heater 
• Free Standing Auto Start Control Panel 
• Location: Europe 

View more Generators

Asian Test Equipment TRS-DN Hardness Tester ID: 1416152

Asian Test Equipment TRS-DN Hardness Tester

• Make: Asian Test Equipment
• Model: TRS-DN
• Type: Rockwell Hardness Tester
• Year: 2021
• Condition: Used, Reported in Good Condition
• Test Loads (kgf): 60, 100, 150 (Rockwell)
• Initial Loads (kgf): 10
• Max Test Height: 290mm
• Depth of Throat: 133mm
• Load Control: Automatic (Loading, Dwell, Unloading)
• Dwell Time: 1-99 (Selectable)
  
  
• Overall Dimensions: (Approx.)
  • Length: 610mm 
  • Width: 173mm
  • Height: 705mm
  • Weight: 100kg
    
    
• Location: Western Canada

View More Laboratory Equipment

Baldor 60 HP Super-E Motor ID: 158069

• 230/460V.
  • 3 phase.
  • 60 Hz.
• 1780 rpm.
• 138/69A.
• Frame: 364T.
• Enclosure: TEFC.

Please contact us for more information.

View more 60 HP Motors

Allen Bradley 2100 Series 24" Fused Bucket ID: 187037

• 480/600 VAC
• 3 Phase
• 24" Height
• Fusible
• Door Included
• Will Install Electrical Components Into Bucket According to Customer's Needs
• Quantity 12

View More MCC Buckets

Tadano 25 Ton Rough Terrain Crane ID: 921755

• Model: TR250M-6
• Capacity: 25 Ton 
• Year: 1997
• KM: 48,429 KM 
• Hours: 8,410
• Location: Japan

View more Cranes

Labconco Biosafety HEPA Fume Hood 3450000 ID: 222640

• 5 ft. purifier logic class II.
• Type A2 Biological safety cabinet with 10 in. sash opening.
• Protection type: Product and personnel.
• Conformance: ADA, ETL, NSF 49, UL.
• Exhaust volume : 420-462 CFM.
• Lighting : Fluorescent.
• Electrical : 115 volts, 60 Hz, 12 amps
• Weight : 715 lbs. (324 kg)
• Dimensions : 66.3 in. Wide, 31.2 in. Deep, 61.4 in. high
• Location: Western Canada
• Contact us for more information.

 View more Fume Hoods  

Hydraulic Rams ID: 1279453

Hydraulic Rams

Quantity: 2 Units

• Ram #1
  • Main Housing: 12in Diameter x 88in Long
  • Main Chrome Shaft: 6in Diameter
  • Approx. 80in Stroke
  • Main Bushing Hole: 4 3/8in Diameter (4.375in)
    
    
• Ram #2
  • Main Housing: 9in Diameter x 79in Long
  • Main Chrome Shaft: 4.5in Diameter
  • Top Bushing Hole: 4in Diameter
  • Bottom Bushing Hole: 4in Diameter
  • Approx. 71in Stroke
    
    
• Location: Savona, British Columbia, Canada

View More Hydraulic Cylinders

250kW Cummins Diesel Generator ID: 1414113

250kW Cummins Diesel Generator

• Make: Cummins
• Model: 250DFAC
• Condition: Good Used Condition
• Hours: 942.2 Hours
• Duty: Standby
• Fuel: Diesel
• Stationary/Portable: Stationary - Skid Mounted
  
  
• Engine: Cummins Diesel Engine
  • Model LTA10-G1 (380HP@1800RPM)
  • Year: 1992
  • Oil: Capacity - 36 Liters (38 Qts.)
  • Radiator: Air to Air, Coolant Capacity- 49.2 Liter (13 US Gal)
    
    
• Generator: 
  • kVA/kW: 250kW (312.5kVA)
  • RPM: 1800 RPM
  • Voltage: 480 Volt - Reconfigurable
    • Available 3-Phase Voltages - Amperages
      • 120/208 Volt - 868 Amps
      • 127/220 Volt - 820 Amps
      • 139/240 Volt - 752 Amps
      • 120/240 Volt - 753 Amps
      • 240/416 Volt - 434 Amps
      • 254/440 Volt - 410 Amps
      • 277/480 Volt - 376 Amps
      • 220/380 Volt - 476 Amps   
  • Frequency: 60Hz
  • Phase: 3-Phase
  • Power Factor: 0.8
  • Output Panel: Analog Control Panel
    
    
• Additional Information:
  
  • Transfer Switch
  • Enclosed
  • Prior Municipal Unit
  • Needs Replacement Fuel Tank
    
    
• Location: Eastern USA

View More 201-300kW Diesel Generators

Arktite AR1042 100Amp 3W 4P Wall Mount Plug Housing ID: 990413

Arktite AR1042

100Amp

3w 4p

wall mount housing (no guts)

Steel 3 inch Channel ID: 78146

• 3 inches deep.
• 3/16 inch web.
• 20 ft. lengths.
• Please inquire for additional information.

Schneider Electric Multi Distribution Switchboard ID: 222823

• Model: MDS 19382 + 19383.
• S/N: 34111201-001.
• Condition: New .
• PANEL 1.
• 600 amps.
• 600 volts, 3-phase.
• Incoming via cable.
• PANEL 2.
• 1 x 600 amp MGF3660 PowerPact breaker.
• 1 x 200 amp JDA36200 PowerPact breaker.
• 1 x 250 amp JLA36250 PowerPact breaker.
• 2 x 150 amp HJA36150 PowerPact breakers.
• 2 x 100 amp FH36100 I-Line breakers.
• 1 x 60 amp FH36060 I-Line breaker.
• 1 x 40 amp FH36040 I-Line breaker. 
• Location: Western Canada.
• Contact for more information.

View more 600 Amp Breaker Panels.

General Electric 250 VA Control Transformer ID: 618251

250 VA

Cat No: 61G19

EN: 66351

CYC: 60

460V

115V

All-Fill Sanitary 6 in x 8 ft Screw Feeder ID: 212035

• Inclined portable style.
• Stainless steel construction.
  • Food grade.
  • All welds continuous and ground smooth.
• Includes bridge breaker.
• Clean-out port on bottom.
• Manual hydraulic jack for variable height adjustment.
• Removable cover and bearing end plate on trough.
• Leeson 1/2 HP electric motor.
  • 208-230/460V.
  • 1,725 rpm.
    • 3 phase.
  • Continuous duty.

Please contact us for more information.

View more Screw Feeders

1 in Minus Grinding Balls ID: 175418

• 1 bin available.
  
  • 46 in. deep.
  • 49 in. wide.
  • 18 in. high.
• Approx. 6500 lbs.

View more Grinding Media

168in x 84in x 84in Explosive Storage Mag ID: 1424157

168in x 84in x 84in Explosive Storage Mag

• Make: Protexplo
• Year: 2009
• Condition: Used Condition
• Dimensions: 
  • Length: 168in
  • Width: 84in
  • Height: 84in

• Location: Eastern Canada

View More Powder Mags

12in. Dia Korfmann Air Ventilation Fan ID: 294599

• 12 in. Diameter
• Model: DV 3
• Approx. 45 cfm Air Consumption
• Approx. 3500 cfm Unrestricted Discharge Volume
• Location: Western Canada

View more Air Driven Ventilation Fans

2011 CAT D10T Dozer ID: 1235836

2011 CAT D10T Dozer

• Make: Caterpillar
• Model: D10T
• Year: 2011
• Condition: Used, Running and Ready to Work
• Hours: 7,534
• Very Good Undercarriage
• Single Shank Ripper
  
  
• General Specifications For CAT D10T:
  
  
  • Engine
    • Number Of Cylinders: 12
    • Engine Make: Caterpillar
    • Engine Model: C27 ACERT
    • Gross Power: 646HP @1800rpm
    • Displacement: 1647.5in³
    • Aspiration: Turbocharged
      
      
  • Transmission
    • Transmission Type: Powershift
    • Number Of Forward Gears: 3
    • Number Of Reverse Gears: 3
    • Max Speed - Forward: 7.9mph
    • Max Speed - Reverse: 9.8mph
      
      
  • Standard Blade Specifications: 
    • Type 10U
    • Capacity: 22m³ (28.8yd³)
    • Width (Over End Bits): 5,260mm (17ft 3in)
    • Height: 2,120mm (6ft 11in)
    • Digging Depth: 674mm (26.5in)
    • Ground Clearance: 1,497mm (58.9in)
    • Maximum Tilt: 1,074mm (42.3in)
      
      
  • Hydraulic System
    • Pump Type: Gear Driven
    • Relief Valve Pressure: 2725 PSI
    • Pump Flow Capacity: 107 Gal/min
      
      
  • Undercarriage
    • Shoe Type: ExtremeService
    • Track Gauge: 8.37ft
    • Standard Shoe Size: 24in
    • Number Of Track Rollers Per Side: 8
    • Number Of Shoes Per Side: 44
    • Ground Contact Area: 7,326in²
    • Track Pitch: 10.2in
      
      
  • Operational
    • Operating Weight: 146,500 lbs.
    • Fuel Capacity: 318 Gal
    • Cooling System Fluid Capacity: 34.9 Gal
    • Engine Oil Capacity: 18 Gal
    • Hydraulic Fluid Capacity: 38 Gal
    • Powertrain Fluid Capacity: 51 Gal
    • Final Drives Fluid Capacity: 6 Gal
    • Operating Voltage: 24V
    • Alternator Supplied Amperage: 95 Amps
      
      
  • Overall Dimensions:
    • Length: 17.5ft
    • Width: 10.4ft
    • Height: 13.4ft
    • Weight: 146,500 Lbs.
      
      
• Location: South America

View More Dozers

2250 KW Cummins Generator ID: 229878

• HZ: 50
• RPM: 1500
• Low Hours
• Stamford Alternator Model: P1734G1
• Mounted Radiator Cooler
• Skid Mounted 
• Mounted Control Panel
• Free Standing Circuit Breaker
• Location: Europe

View More Generators

Leeson 10 HP Motor ID: 195664

• 575 VAC
• 1740 RPM
• H215T Frame
• FLA 10.8
• 60 Hz
• S.F. 1.15
• Open Drip Proof
• Quantity 1

View More 10 HP Motors

Hammond 45 kVA Transformer ID: 157849

• High voltage: 600V.
• Low voltage: 208Y/120V.
• Type: K.
• Enclosure type: NEMA-3R.
• Weight: 400 lbs / 181 kg.
• Quantity: 2.

Please contact us for more information.

View more 45 kVA Transformers

Nissan Optimum 50 Forklift ID: 147557

• Nissan Forklift.
  • Model: Optimum 50.
    • Capacity: 5,000 lbs.
  • Equipped with:
    • 3 cylinder propane engine.
    • 3 ft. forks.
    • 2 stage mast.
    • 10 ft. mast height.
    • Side shift.
    • Solid tires.
      • Front: 21x7x15.
      • Rear: 16x6x11.
  • Please see the specs tab below for more detailed information.
    • Specs

Please contact us for more information.

ABB 125 HP Motor ID: 191773

• Type: TFS.
• Model: 2D 444THEN6543AA.
• Volts: 460V.
• RPM: 1787.
• Phase: 3.
• Poles: 4.
• Frame: 444T.
• Shaft Size:
  • 8 In. Length.
  • 3 1/4 In. Diameter.

View more 125 HP Motors 

Caterpillar Manual Telescoping Jib ID: 143689

• Caterpillar Manual Telescoping Jib.
  • Quick connect lugging.
    • For CAT IT28G Integrated Tool Carrier.

Please contact us for more information.

Westinghouse 3 Pole 400 Amp Breaker ID: 162930

• 600 VAC
• 250 VDC
• 3 Phase
• Cat #: LB3400SNW
• Style #: 626B884G12
• Quantity 2

View More 400 Amp Breakers

Industrial Filters 66-5-27 Pressure Filters ID: 163352

• Type: 122.902.
• Series: 66-5-26.
• Model: D.
• 800 ft² filtering area.
• MAWP 100 psi @ 310°F.
• MDMT 42°F @ 100 psi.
• Set up for 26 leaves at 5 in. centers.
• 2300 gallon capacity.
• Manufactured 1988.

View more Pressure Filters

Alfa Laval MAPX 207 Centrifugal Separator ID: 1377212

Alfa Laval MAPX 207 Centrifugal Separator

• Make: Alfa Laval
• Model: MAPX 207S-24
• Year: 1987
• Condition: Used
• Capacity: 5,750 Liters Per Hour
  
  
• Location: Europe

View More Centrifuges

16 in. Gate Valves ID: 224446

• Clow Valve Company.
• For fire service (997G).
• 16-hole bolt pattern.
• Purchased new in 2009/2010.
• Quantity: 4.
• Location: Central Canada.
• Contact for additional information.

View more Gate Valves

15HP Electric Power Pack ID: 1392975

15HP Electric Power Pack

• Capacity: 62 Gallons Approx.
  • Hydraulic Tank Dimensions: 40in L x 21in W x 17in H
• Hydraulic Pump: Metaris MHV20
• Drive: Westinghouse Electric Motor
  • Model: LR47823
  • Power Output: 15HP
  • Speed: 1765 RPM
  • Voltage: 575 Volt
  • Current: 13.8 Amps
  • Frequency: 60Hz
    
    
• Overall Dimensions:
  • Length: 40in
  • Width: 22in
  • Height: 30in
    
    
• Location: Savona, British Columbia, Canada

View More Electric Power Packs

2017 Trio Portable Wash Plant ID: 1126000

2017 Trio Portable Wash Plant

• Make: Trio
• Capacity: Rated at 100 Tons Per Hour
• Material: Sand
• Trio 36” Single Fine Material Washer
• Trio 5’ x 16’ 3-Deck Inclined Screen
• Fine Material Washer & Inclined Screen Mounted on Tandem Axle Trailer
• (2) 30” x 120’ Portable Stacking Conveyors
• (1) 24” x 40’ Channel Frame Conveyor
• (1) Feed Hopper with Grizzly Bar Top & Belt Feeder
• (1) Water Pump on Float
• (1) Baldor 350kW Skid Mounted Generator
• All Plant Electrical Control Boxes & Accessories
  
  
• Plant Is In Excellent Condition With Very Little Material Processed Through the Screen/Sand Screw
• Plant Has Worked Less Than 1 Year
  
  
• Location: USA

View More Wash Plants

Westinghouse 125 HP 460 Volt Electric Motor ID: 685444

• Voltage: 460
• 125 HP
• 1200 RPM 
• Frame: 445T
• Location: Western Canada

View more Electric Motors

Godwin CD150M Pump ID: 255279

• 6 inch Diesel Driven Pump
• Max Solids Handling of 3"
• Max Flow of 2290 GPM @ 40 ft of Head
• Capable of Heads over 120 ft
• 3,100 hours.
• Complete Rebuilt Wet End
• Location: Eastern Canada

View more Portable Pumps