Henan Shibo 2PG400X250 Double Roll Crusher ID: 1424568

Henan Shibo 2PG400X250 Double Roll Crusher

• Make: Henan Shibo Mechanical Engineering Co.
• Model: 2PG400X250
• Condition: Used, Reported in Good Condition 
• Hours: Less Than 40 Hours Use
• Number of Rolls: 2 Rolls
• Capacity: 5-15 TPH
• Roll Diameter: 400mm (15.7in)
• Roll Length: 250mm (9.8in)
• Teeth Material: ZGMn13
• Max Feed Size: 25mm
• Discharge Size: 2-8mm
• Compression Strength: 180 MPa
• Comes with Channel Steel Stand With Fork Pockets and Stairs
• Drive: (2) Electric Motors
  • Power Output: 5.5kW
  • Roller Speed: 180 RPM 
  • Voltage: 600 Volts
  • Frequency: 60Hz
  • Phase: 3-Phase
    
    
• Overall Dimensions: Crusher Only
  • Length: 1,837.5mm (72.3in)
  • Width: 1,904mm (75in)
  • Height: 1,001mm (39.4in)
  • Weight: 1.5 Tons
    
    
• Location: Eastern Canada

View More Roll Crushers

3 KVA Westinghouse 480 - 120/240 Single phase For Sale ID: 50747

3 KVA Westinghouse Transformer

480 - 120/240 Single phase

Come With built in 8 Circuit breaker Panel

Epoxy Coated

16 in. x 15 ft. Column Cell Assembly ID: 102055

• Column cell assembly.
• 16 in. dia. x 15 ft. high.
• Spray nozzle assembly.
• Top concentrate launder.

View more Floatation Cell 

14,500 Gallon Fiberglass Tank ID: 152329

• 8.5 ft. x 40 ft. Fiberglass Tank.
  • Double walled. 
  • Capacity: 14,500 gallons / 50,000 litres.
  • Steel manway.
  • 5 - 4 in. threaded fittings.
  • External baffles for burial.
  • Tank previously used for fuel.
    • Defumed and aerated.
• Ideal for Fire protection.

Please contact is for more information.

More Equipment Deals

Buss 200 Amp 250 Volt Fuse ID: 522336

Amp: 200

Volt: 250

CAT#: NON-200

One Time Fuse

Honeywell Timer ID: 1263141

Honeywell Timer

Type: 117

P75EAAP5

RPM 1/2 

120V

CY 60 

W 2.7

Tamrock DHA 550 Quarry Drill ID: 109112

• Tamrock Quarry Drill.
  • Model: DHA 550.
  • Year: 1999.
  • Hours: 1,080.
  • Enclosed cab with air conditioning.
  • Deutz 6 cylinder diesel engine.
    
    • Rebuilt in 2014.
    • Hours: 7,483.
  • Reported to be in excellent working condition.
  • Can drill up to 300 meters.

Syntron Vibrating Pan Controller ID: 845418

• Model: CRSC-2C
• Volts: 460
• Amps: 30
• Single Phase
• 60 Hz
• Location: British Columbia, Canada

View more Vibrating Pan Feeders

Wagner HST-1A Scooptram ID: 1424661

Wagner HST-1A Scooptram

• Make: Wagner Mining Equipment
• Model: HST-1A
• Year: Refurbished in 2021
• Hours: 293.4 Hours
• Condition: Used, Reported in Good Condition
• Capacity: 1-Yard
• Engine: Deutz F4L-912W
• MSHA Certified - Approx. 6 Months Ago
• Canopy: Equipped
  
  
• General Model Specifications:
  • Capacity:
    • Breakout Force: 3,157 kg (6,960 Lbs.)
    • Break Out Force, Hydraulic: 3,824 kg (8,430 Lbs.)
    • Tramming Capacity: 1,361 kg (3,000 Lbs.)
  • Bucket:
    • Nominal Heaped: 0.76m³ (1.0yd³)
    • Struck: 0.67m³ (0.875yd³)
    • Boom Raising Time: 4.3 Seconds
    • Boom Lowering Time: 3.6 Seconds
    • Bucket Dump Time: 2.5 Seconds
  • Engine: Deutz Diesel F4L-912W
    • Power Output: 55HP (41kW)
    • Max Torque: 135 ft-lbs. (183Nm)
    • Cooling: Air Cooled
  • Steering: Articulated, Hydraulic Power Steering
    • Turning Angle: 85° (42.5° Each Way)
    • System Pressure: 12.4MPa (1,800 PSI) 
      
      
• Location: West Central USA

View More Scooptrams

Cutler Hammer 400 Amp Distribution Panel ID: 155943

• 1st Section:
  • 120/208V.
    • 3 phase.
  • 4 wire.
  • BA Bolt-in breakers.
  • 72 circuit.
  • 59 single pole 15 amp breakers.
  • 1 double pole 15 amp breaker.
  • 3 single pole 30 amp breakers.
• 2nd Section:
  • 120/208V.
    • 3 phase.
  • 4 wire.
  • BA Bolt-in breakers.
  • 72 circuit.
  • 58 single pole 15 amp breakers.
  • 1 double pole 15 amp breaker.

Please contact us for more information.

View more 400 Amp Panels

View Our Inventory of Breakers

Vibramech H2-48-24 2-Deck Horizontal Screen ID: 1388219

Vibramech H2-48-24 2-Deck Horizontal Screen

• Make: Vibramech
• Model: H2-48-24
• Year: 2010
• Condition: Used, Reported in Good Condition
• Number of Decks: 2-Deck
• Inclination: Horizontal
• Spray Bars: 4
• Vibration Motors: 4 x 11 kW
• Deck Width: 2,440mm (96.1in)
• Deck Length: 4,880mm (192.1in)
  
  
• Overall Dimensions:
  • Width: 3,160mm (124.4in)
  • Length: 5,862mm (230.8in)
  • Height: 3,514mm (138.3in)
  • Weight: 12,000 kg
    
    
• Location: Western Canada

View More Horizontal Screens

Square D 2 Pole 50 Amp Breakers ID: 335435

• 2 Pole
• Amp: 50
• Volt: 120/240
• Style: Bolt On
• Type: QOB
• Single Phase
• 4 Units Available
• Location: British Columbia, Canada

View more Breakers

2012 Caterpillar 416F Backhoe ID: 179064

• Hours: 1920
• Engine Specifications
  • Net Power:  87.0 hp
  • Model:  Cat C4.4 ACERT DIT
  • Displacement 268.0 in3
  • Fuel type Diesel
• Backhoe specifications (standard)
  • Dig depth standard 14.3 ft.
  • Reach from swing pivot 18.42 ft.
  • Bucket rotation 205 degrees
  • Bucket dig force 12973 lb.
  • Loading height 11.9 ft.
  • Loading reach 6.0 ft.
• Loader specifications
  • Bucket capacity: 1.0 yd3
  • Width 7.42 ft
  • Dump height @ max angle 9.25 ft
  • Dump reach @ max angle 2.42 ft
  • Dig depth 3 in
  • Lift capacity 6751 lb
  • Bucket breakout force 107762 lb

• Please contact for more information

• View More Backhoes

Ingersoll-Rand 60NM-4C 2 Drum Electric Slusher ID: 171816

• SIZE: 60NM-4C.
• Rope pull: 6600 lbs.
• Average Rope Speed 300 feet per minute.
• 60 HP motor.
  • 575V.
  • 1725 rpm.
• Mounted on steel skid.

View more Double Drum Electric Slushers Hoists

Hoffman MicroSwitch ID: 1387580

Hoffman MicroSwitch

600V AC

• Location: Savona, British Columbia, Canada

Westinghouse 2 Pole 20 Amp FDB Breaker ID: 191558

• 600 VAC Max
• 250 VDC
• 2 Pole
• Cat #: FDB2020
• Quantity 1

View More 2 Pole 20 Amp Breakers

112.5 KVA 600-208Y/120 Volt - 3 Phase Marcus Transformer For Sale ID: 45042

• 112.5 KVA Marcus Transformer
• 600-208Y/120 Volt
• 3 Phase

Savona Equipment HD 10 x 20 Derocker ID: 185351

• Standard size: 10 ft. x 20 ft. (3 m x 6 m).
• Max Capacity: 200 TPH

Features:

• Made in Canada and available worldwide
• Most effective design for maximum throughput and gold recovery
• All components are extra heavy duty
• Removable hopper for ease of shipping
• Derocker can be transported level and raised to correct pitch once in place.

Specifications:

• Max Capacity: 200 TPH
• Size: 10 ft. x 20 ft. (3 m x 6 m).
• Water requirement: Approx 3,500 GPM (13,300 L/min).
• Diesel Hydraulic drive.
• Electric drive optional.
• Removable feed hopper included
• Discharge chute included
• All skid mounted
• Shipping Dimensions: (L x W): 22 ft. x 10 ft. 8½ in. (6.71 m x 3.26 m)
• Weight: 40,000 lbs / 18,200 kg.

Options Available:

• Custom sluice boxes
• Custom sized derockers
• Custom drive options

Ask Savona Equipment how we can help you with additional new or used equipment to complete your process.

View More Derockers

R.A Warren 4 Ton Battery Locomotive ID: 1013601

• 30 in. Rail Gauge 
• Solid State Control Hydraulic Brakes 
• No Battery Box
• Approx. Dimensions: 45 in. Wide x 145 in. Long x 45 in. High 
• Location: Western Canada

View more Locomotives

Marcus 45 kVA Transformer ID: 147091

• Marcus 45 kVA Transformer.
  • High voltage: 600V.
  • Low voltage: 120/208V.
    • 3 phase.
    • 60 Hz.
  • Indoor dry type.
  • Energy efficient.

• Shipping information:
  • Dimensions (L x W x H):
    • 19 in. x 30 in. x 30 in.
    • 48 cm x 76 cm x 76 cm.

Please contact us for more information.

7/8 in. Hex Drill Steel. Various Lengths. ID: 43511

7/8 in. Hex Drill Steel. Various Lengths.

40-foot generator/parts van ID: 45313

• Tandem axle with 5th wheel pin and landing gear.
• Air intake louvres at both ends.

Deister 72 in. x 14 ft. Vibrating Pan Feeder ID: 209333

• 72 in. wide.
• 14 ft. long.
• Type: VFB-7214
• Never used.

View more Vibrating Pan Feeders

Atlas Copco ROC D7-11 and ROC D7-RRC Drill Package ID: 1418455

Atlas Copco ROC D7-11 and ROC D7-RRC Drill Package

Quantity: 2 Drill Package

• Make: Atlas Copco 
• Models: ROC D7-11 and ROC D7-RRC
• Type:
  • D7-11: Quarry Drill
  • D7-RRC Radio Remote Control Rock Drill
• Years: 
  • D7-11: 2010
  • D7-RRC: 2006
• Hours:
  • D7-11:
    • Frame Hours: 8,050 Hours
    • Impact Hours: 2,874 Hours
  • D7-RRC:
    • Frame Hours:
    • Impact Hours:
• Condition: Used, Reported in Working Condition
• Comes with Spare Atlas Copco COP 1840 Drifter Drill
  
  
• ROC D7-11 General Model Specifications:
  • Rock Drill: Atlas Copco COP 1840
    • Impact Power: 20kW (26.8HP)
    • Hydraulic Pressure: 230 bar (3,335 PSI)
    • Impact Rate: 42-50Hz
    • Torque: 1,180Nm (870lbf/ft)
  • Hole Range:
    • T38, T45, T51 Drill Steel: 64-115mm (2½”- 4½”)
    • Hydraulic Rod Handling System for Max Hole Depth (with 3.6m (12’) Extension Rods)
      • T38, T45: 28m (92’)
      • T51: 21m (69')
  • Engine: CAT C7, Tier III/Stage 3
    • Power: 168kW (225HP) 
  • Feed: Hydraulic Cylinder Feed with Hose Guide and Double Drill Steel Support with Movable Lower Guide/Dust Hood
    • Feed Extension: 1,400mm (4 ’7’')
    • Feed Rate, Max: 0.92 m/s (184 ft/min)
    • Feed Force, Max: 20kN (4,400 lbf)
    • Tractive Pull, Max: 20kN (4,400 lbf)
    • Total Length: 7,140mm (23’ 5’’)
    • Travel Length: 4,240mm (14’)
  • Dust Collector: DCT 110D
    • Filter Area: 11m² (118ft²)
    • Number of filter elements: 11 pcs
    • Suction Capacity at 500mm W.G.: 560 l/s (1,200 CFM)
    • Suction Hose Diameter: 127mm (5’’)
    • Cleaning Air Pressure, Max: 7.5 bar (109 PSI)
    • Cleaning Air Consumption: 2-4 l/pulse (0.06 - 0.12 ft³/pulse)
  • Hydraulic System:
    • Anti-Jamming
    • Automatic Feed Force Control: RPC-F
    • Damper Pressure Control: Impact DPC-I
    • Hydraulic oil cooler - Max Ambient Temperature: 50°C (122°F)
      
      
• ROC D7-RRC Rock Drill General Model Specifications:
  • Recommended hole range for ROC D7
    • T38, T45: 64-115mm (2.5”- 4”)
    • Hole Depth: 28m (approx. 92’)
    • T51: 21m (69’)
  • Engine ROC D7: Caterpillar Water-Cooled Turbocharged Diesel
    • Model: CAT 3126B
    • Power: 149kW (203HP)
  • Hydraulic Rock Drill ROC D7:
    • Model: Atlas Copco COP 1840 Drifter
    • Impact Power, Max: 18kW (24.5HP)
    • Hydraulic Pressure, Max: 230 bar (3,335 PSI)
    • Torque, Max: 980Nm (724 lbf/ft)
    • Weight: Approx. 171kg
  • Boom: Folding Boom
  • Air Compressor ROC D7:
    • Make/Model: Atlas Copco Screw Compressor C106
    • Working Pressure, Max: 10.5 bar (152 PSI)
    • FAD: 105 l/s (215 CFM)
      • Or 127 l/s (270 CFM)
  • Fuel Tank Capacity: 280 liters (73 US Gal.)
  • Feed:
    • Feed Length, Total: 7,140mm (24’)
    • Travel Length: 4,240mm (15’)
    • Feed Extension: 1,400mm (4’ 3”)
    • Feed Rate, Max: 0.92 m/s (180 ft/min)
    • Feed Force, Max: 20kN (4,400 lbf)
  • Tramming:
    • Tramming Speed: 3.1 km/h (2 mph)
    • Traction Force: 110kN (25,000 lbf)
    • Hill Climbing Ability: 20° (30° with Winch)
    • Track Oscillation: ±12°
    • Ground Clearance: 455mm (17.5”)
  • Transport Dimensions:
    • Length: 10,710mm (35’ 2”)
    • Width: 2,370mm (7’ 10”)
    • Height: 3,100mm (10’ 2”)
    • Weight: 13,000 kg (29,300 lbs.)
      
      
• Location: Northwest USA

View More Quarry Drills

CIA Fuse Holder ID: 1394129

CIA Fuse Holder

30A

600V AC

CIA Fuses Only

• Location: Savona, British Columbia, Canada

Franklin Miller RM1010M Roll Crusher ID: 1260420

Franklin Miller RM1010M Roll Crusher

• Make: Franklin Miller
• Model: RM 1010M
• Rolls Diameter: 10in Diameter x 10in Long
• Infeed Hopper Dimensions:
  
  • Length: 25in
  • Width: 18in
  • Height: 23in
• Discharge Hopper Dimensions:
  • Length: 17in
  • Width: 23in
  • Depth: 8in
  • With 8in Diameter Discharge
• Drive Shive: 12in Dia x 1.75in Wide - 3 Groove
• Mounted on 2.5in x 2.5in Tubing Frame
  
  
• Overall Dimensions:
  • Length: 75in
  • Width: 48in
  • Height: 93in
    
    
• Location: Savona, British Columbia, Canada

View More Roll Crushers

U.S. Stoneware 4 ft. x 5 ft. Pebble Mill ID: 211432

• US Stoneware pebble mill.
• Serial No.: ZZ59123.
• Approximately 4 ft. diameter x 5 ft. long.
• Ceramic lined.
• Outboard roller bearings on stands.
• Comes with 10 hp motor drive.

View more Batch Mills 

Delta Industrial 30 in Knife Valve ID: 143922

• Delta Industrial Knife Gate Valve.
  • Model: V-0088.
    • Size: 30 in.
      • Seals: GFLT.
      • Class: 150.
      • Max. temperature: 400°F.
      • Body: CS.
  • Unit is reported in fair condition.

Please contact us for more information.

20,000 Gallon Steel Storage Tank ID: 54711

• Vertical style.
• 12 ft. dia. x 35 ft. tall.
• 3/16 - 1/4 in. steel wall with epoxy lining.
• Reinforced base with metal skirt.
• Last used to store milk.
• Has been cleaned out.
• Tank is in very good condition.

Spitznas SDS Plus Pneumatic Rotary Hammer Drill ID: 1398259

Spitznas SDS Plus Pneumatic Rotary Hammer Drill

Qty: 2 Units

• Make: Spitznas
• Model: 2 2404 0030
• Type: SDS Plus
• Condition: Used, Reported in "Like New" Condition
• Hammer Drill Mode for Drilling Holes in Concrete, Brick and Masonry
• Rotary Drilling Mode for Straight Drilling of Steel and Wood
• Built-in Oiler for Air Motor
  
  
• Specifications:
  • Blows/Minute (BPM): 0-3000 BPM
  • Drill Speed (RPM): 0-625 RPM
  • Power at 90 PSI: 0.7HP
  • Air Consumption at 90 PSI: 21 CFM
  • Tool System: SDS Plus
  • Max Drilling Diameter (Solid Bit Drilling Concrete): 1in
  • Max Drilling Diameter (Core Bit Drilling Concrete): 3in
  • Max Drilling Diameter (Twist Drill Drilling Wood):  3/4in
  • Dimensions: 16in x 8.5in x 4in
  • Weight: 11 Lbs.
    
    
• Location: Central Canada

View More Miscellaneous Drills

CCS Pressure Switch ID: 1367430

CCS Pressure Switch

Model:695GEAJ3

Proof 3000 PSIG

DECR: 320 PSI

• Location: Savona, British Columbia, Canada

Toshiba G7 10 HP VFD ID: 170246

• Input
  • 480 VAC
  • 16.5 Amps
  • 50/60 Hz
• Output
  • 480 VAC
  • 15 Amps
  • 0 - 400 Hz
• Cat #: VT130G7U4110B
• Serial #: A070109882
• Quantity 1

View More 10 HP VFDs

Westinghouse 2 Pole 20 Amp Bolt-On Breaker ID: 191322

• 240 VAC Max
• 2 Pole
• Bolt-on
• Type BA
• Quantity 1

View More 2 Pole 20 Amp Breakers

Falcon SB250 Centrifugal Gold Concentrator ID: 1381013

Falcon SB250 Centrifugal Gold Concentrator

• Make: Sepro Falcon
• Model: SB250
• Year: 2014
• Condition: Used, Reported in Very Good Condition
• Discharge: Automated
• Comes with Variable Speed Control and Electric Motor
• Recommended Solids Capacity: 1 - 10 TPH
• Approximate Max Slurry Capacity: 20m³/hr.
• Concentrating Surface Area: 0.17m²
• G-Force Range:
  • Upper: 200 G's
  • Lower: 50 G's
• Machine Weight: 269 kg
• Motor Power: 2.2kW (3.0HP)
• Process Water Consumption: 1.8-2.7 m³/hr.
• Continuous Water Supply Pressure: 2-3 bar
• Recommended Max Feed Particle Size: 2.0mm
• Absolute Max Feed Particle Size: 2.5mm
• Maximum Feed Percent Solids: 55-70%
• Concentrate Slurry Flush Volume: 50 Liters
• Concentrate Solids Flush Volume: 1,010cm³
• Dimensions:
  • Width: 1.04m
  • Length: 0.66m
  • Height: 1.02m
    
    
• Location: Europe

View More Gold Concentrators

Eriez 72 in. x 72 in. Self Cleaning Cross Belt Magnets ID: 524767

• Model: SE7920A
• Style: SC-2
• Magnet Voltage: 230 DC
  • 64 Amps
  • 14,811 Watts
• Belt Width: 66 in.
• Magnet Dimensions: 72 in. x 72 in.
• Magnet Height: 36 ¾ in. 
• Conveyor Length: 111 ½ in. 
• 2 Units Available
• Location: Eastern Canada

View more Belt Magnets

Martin Engineering 16 in. x 28 in. Vibro Screener ID: 211489

• Model: CD18.910.
• Approximately 16" wide x 28" long screen.
• Stainless steel construction.
• Single deck on stand.
• .35 kw Vibro Motor:
  • 230/460 volt vibro motor.
• Serial No.:974119.

View more Vibrating Pan Feeders

TMG 58 Breaker ID: 174355

• Model: TMG 58.
• Body weight: 155 kg.
• Operating pressure: 55 L/min.
• Impact frequency: 700 BPM.
• Product ID: JYNO.

Please contact us for more information.

View more Excavator Attachments

18in Dia. x 7ft Trommel Wash Plant ID: 1394383

18in Dia. x 7ft Trommel Wash Plant

Includes Trommel and Hopper/Feeder

• Trommel:
  • Size: 18in Dia. x 7ft Long
  • Capacity: 3 YPH
  • Screen Area: 4.5ft Long
    • Screen Spacing: 0.5in
  • Sluice Under Trommel
    • 14in Wide x 6.5ft Long
    • With Carpeting
  • Water Connection Sizes: 2in
  • Drive: Electric Motor
    • Power Output: 1 HP
    • Frequency: 60Hz
    • Phase: Single
  • Overall Dimensions:
    • Length: 11.5ft
    • Width: 5.5ft
    • Height: 6.5ft
      
      
• Hopper/Feeder
  • Hopper Dimensions:
    • Length: 4ft
    • Width: 6.5ft
    • Depth: 4ft
  • Capacity: Approx. 3 Yards
  • Grizzly Spacing: 3.5in
  • Conveyor: 12in Wide x 17ft Long
  • Drive: Electric Motor
    • Power Output: 0.75HP
    • Frequency: 60Hz
    • Phase: Single
  • Overall Dimensions:
    • Length: 18ft
    • Width: 7ft
    • Height: 7ft 4in
      
      
• Location: Northwest USA

View More Trommels

Sala 2 ft Vertical Sump Pump ID: 142453

• Sala Vertical Sump Pump.
  • Model: G-20-284-4.
    • 4 in. discharge.

Please contact us for more information.

GOULD One-Time 2 AMP fuse ID: 360816

2 AMP

600V or less

Cat#: NRS2

Length: 5"

Maintenance/utility car. 16 feet long X 4 feet wide. On 24 in. track guage. Comes with 2 open comparments and 1 multible shelved comparment. All with hinged front doors. ID: 43795

Maintenance/utility car. 16 feet long X 4 feet wide. On 24 in. track guage. Comes with 2 open comparments and 1 multible shelved comparment. All with hinged front doors.

8x6 KSB GIW 150HP Slurry Pump ID: 1369080

8x6 KSB GIW 150HP Slurry Pump

• Make: KSB Georgia Iron Works
• Model: LCC-M150-500.3E AFM1
• DOM: April/May 2021
• Condition: New Surplus
• Style: Centrifugal Pump
• Type: Slurry Pump
• Size: 
  • Suction: 8in
  • Discharge: 6in
• Flow Rate: 150HP Motor: 3,000 Gal/Min @ 160 Ft. (69 PSI)
• With Diverter Valve and Check Valve
  
  View Spec Sheet Below
  
  
• Drive: 150HP Electric Motor
  • Make: Toshiba
  • Model: 1504SDSR41A-PR
  • Power: 150HP (112kW)
  • RPM: 1785
  • Voltage: 230/460 Volt
  • Frequency: 60Hz
  • Phase: 3-Phase
  • VFD Included
    
    
• Location: Northwest Canada

View More Slurry Pumps

Square D 125 Amp Lighting Breaker Panel ID: 374216

• 240/120 Volt
• 24 Circuit
• Model/Series: Q0C24UC
• Push in Breaker Type
• 2 x 20 amp Single Pole Breakers
• 3 x 15 amp Single Pole Breakers
• Location: British Columbia, Canada

View more Breaker Panels

JKS-Boyles Winkie GW-15 Diamond Core Drill ID: 1396000

JKS-Boyles Winkie GW-15 Diamond Core Drill

• Make: JKS-Boyles
• Model: Winkie GW-15
• Type: Diamond Core Drill
• Style: Man Portable
• Condition: Used - Comes with Spare Engine
  
  
• General Model Specifications:
  • Power Unit: Gasoline, 2-Cycle, Air Cooled Engine
    • Output: 10HP @ 8400 RPM
  • Transmission: Oil Bath Gear Shift Transmission
  • Clutch: Centrifugal
  • Unipress Hand Feed 
  • Max Bit Speed:
    • Low Speed: 1200 RPM
    • High Speed: 2800 RPM
  • Weight:
    • Drill: 85 lbs.
    • Feed: 100 lbs.
      
      
• Hole Depth Core Size: E-Core
• Core Barrel: E-Core Thin Kerf IAWS
• Core Diameter 1in (23mm)
• Hole Diameter 1-1.5in (38mm)
• Depth: 425-475ft (130-145m)
  
  
• Hole Depth Core Size: A-Core
  • Core Barrel: A-Core Thin Kerf IAWS
  • Core Diameter 1.39in (35.3mm)
  • Hole Diameter 1.89in (48mm)
  • Depth: 350-400ft (105-120m)
    
    
• View Spec Sheet Below
  
  
• Location: Eastern Canada

View More Diamond Core Drills

Rapid Span 80 ft. Timber Deck Steel Bridge ID: 969537

• Model: 10024
• Capacity: 100 Ton 
• Dimensions
  • 24.38 Meters Long (80 ft.)
  • 14 ft. Wide 
• Timber Deck Steel Temporary Bridge 
• Modular Design for Easier Transport 
• Year: 2015
• Location: Western Canada

View more Bridges

Godwin CD225 Automatic Self-Priming Pump ID: 157450

• Model: CD225.
• Trailer mounted 8 in. pump.
• Max. GPM: 3100 US (704 m³/hr).
• Max. head: 180 ft. (55 m).
• Capable of handling solids up to 3.2 in. (81 mm) diameter. 
• John Deere 4045 engine.
• Hours: 252.
• Year: 2008.

Please contact us for more information.

View more Trash Pumps

Simco TR-4000 Track Drill ID: 1344008

Simco TR-4000 Track Drill

• Make: Simco
• Model: TR-4000
• Type: Rotary Drill
• Style: Track Mounted
• Serial: 8533996
• Condition: Well Maintained and Ready to Work
• Mainline Winch: KPL5-CC-WH05-1
  • Uses 0.5in Wire Rope, 75ft Long
• Mast Height: 18ft
• Stroke: 11ft
• Ground Pressure: 4 PSI
• Drive: Deutz BF4L913 Diesel Engine
  
  
• Overall Dimensions:
  • Length: 10ft
  • Width: 7ft
  • Weight: 15,000 Lbs. Loaded with Rod
    
    
• Location: Northwest USA

View More Rotary Drills

Eagle Iron Works Wash Plant ID: 148993

• 4 x 12 - 2 deck Simplicity Screen Wash Plant.
  • Top deck comes with ½” screen cloth.
  • Bottom deck comes with 3/16” screen.
  • complete with base frame and springs.
• Mounted on operating steel frame
  • 8 ft. wide X 25 ft. long X 20 ft. high.
  • 4 ½ yard fines hopper.
  • 8” X 6” X 23” discharge slurry pump.
  • 2.5 yard middle deck discharge hopper.
  • 4” X 3” X 10” discharge slurry pump.

Savant DT-100 Automatic Guided Vehicle Systems ID: 202270

• 6 – Savant DT-100 Tugs:
  • Only 1,400 hours.
  • 50,000 Pounds Towing Capacity.
  • Wireless or Wire guidance.
  • Automatic or Manual Operation.
  • RF Communication.
• 16 – 5 ft. x 11 ft. trailers.
• 6 – 240 volt chargers and stands.
• Battery racks with rollers.
• Raymond Forklift for loading batteries.
• Rugged steel frame construction for industrial environments.
• All manuals and schematics included.
• Mechanical Specifications:
  • Towing Capacity: 50,000 lbs. (22,727 Kg) rolling load (Towing capacity on level grade with 2% coefficient of friction trailers).
  • Drawbar: 1000 lbs. (4,553 Kg) rolling load (based on dry concrete with brushed surface or equivalent).
  • Ramp: Up to 2% without de-rating towing capacity (ramps exceeding 3% require special evaluation).
  • Drive Configuration: Dual rear wheel drive: integrated motor, transmission, and drive wheel.
  • Drive Motors: 5 HP (x2), 48 VDC, series wound.
  • Transmission: planetary gear hub with right angle adapter.
  • Steer Configuration: Single front wheel steer.
  • Drive Wheels: 18” (457mm) diameter x 6” (152mm) wide rubber.
  • Front Wheel: 10” (254mm) diameter x 3” (76mm) wide urethane.
  • Brakes: Electric, fail-safe.
  • Frame: 1/2” laser cut steel plate, 3” x 4” steel tube.
  • Battery Compartment: 39.0” (978mm) L x 30.0” (762mm) W x 29.0” (737mm) H with roller conveyor access.
  • Vehicle Weight: 2,250 lbs. (1,023 Kg) without battery.
  • Speed in Automatic: 200 fpm (61 mpm, 2.3 mph), 16 speed ranges.
  • Coupler: Jaw, ball, or towing eye.
  • Manual Operation: Operator onboard compartment with joystick control, electric steering and braking.
  • Key switches: Automatic/Manual, On/Off.
  • Turning Radius: 8 feet (2.438m) minimum.
• Control Specifications:
  • Controls: Single board computer, CAN bus.
  • Electrical System: 48-volt power.
  • Navigation System: Virtual wireless navigation (inertial) or wire-based guidance.
  • Communications: Via Radio Frequency (RF).
  • Routing and Traffic: Onboard control logic.
  • Battery System: Heavy-duty industrial grade battery with discharge meter.
  • Position Accuracy: 1” (25.4mm) stopping, 1” (25.4mm) side to side.
  • Battery Information:
    • Battery AH: 1125 AH (maximum) flooded cell, 1,100 AH sealed (maintenance free).
    • Battery Weight: Flooded – 4,400 lbs. (2,000 Kg); Sealed – 4,200 lbs. (1,909 Kg).
    • Battery cycle: 8 hours minimum, based on standard duty cycle of 20% idle, 40% in motion full speed loaded, 40% in motion full speed unloaded.
    • Charging Method: Manual battery exchange standard (or optional automatic charging).

View more Automatic Guided Vehicles

Westinghouse 150 Amp High Voltage Fuse ID: 189395

• 2750 VAC Max
• Type CLE-1
• 50/60 Hz
• Style #: 208D481G08
• Length: 10.875"
• Quantity 3

View More High Voltage Fuses

Aluminum Water Pipe and Fittings Package ID: 944991

Package Includes Following Sizes of Aluminum Pipe:

• 8” dia. X 35’ – 40’ lengths
  • Quantity: 160 lengths = 6400 Feet

• 10” dia x 35’ – 40’ lengths
  • Quantity: 860 Lengths = 34,400 Feet

• 12” dia. X 35’ – 40’ lengths
  • Quantity: 91 lengths = 3640 Feet

• 40 ft. Sea Can complete with Aluminum Fittings & Elbows.
• 8” Aluminum Pipe Clamps – Quantity: 554
• 10” Aluminum Pipe Clamps – Quantity: 480
• 12” Aluminum Pipe Clamps – Quantity: 113
• Condition: Used
• Located: Western Canada

View more Steel Pipe

G.E. 93 kVA Transformer ID: 195894

• Model: 9T23B4008G22.
• Volts:
  • Primary: 460V.
  • Secondary: 460/266V.
• Hz: 60.
• Phase: 3. 
• Weight: 630 lbs.

View more 93 kVA Transformers  

48in Diameter x 20ft Long Fluming ID: 1395515

48in x 20ft Diameter Fluming

• Diameter: 48in Diameter
• Length: 20ft Lengths
• Construction: Galvanized 
• Type: Corrugated Steel Pipe (CSP)
• Style: Fluming (Culvert Halves)
  
  
• Quantity: 25 Pieces
  • 21 Full Lengths (420ft)
  • 4 Cut Lengths (60ft)
    
    
• Location: Savona, British Columbia, Canada

View More Culverts

Federal Pioneer 400 Amp 600 V Fusible Disconnect ID: 180973

• 600 VAC
• Fusbile
• NEMA 1 Enclosure
• Cat #: 1436
• Suitable for Service Entrance (Extra Cost for Neutral Connection)
• Quantity 1

View More 400 Amp Disconnects

CAT D8K Dozer ID: 476872

• Model: D8K
• Turbocharged CAT D342 Engine 
• 3-Speed Transmission
• U-Blade
• See General Specs Below
• Location: Western Canada

View more Dozers

2012 Liebherr A 934 CHD Material Handler ID: 218854

• Hours: 22,317.
• Operating weight: 36,450 – 37,650 kg.
• Model: A 934 C HD Litronic.
• Liebherr D 934 L Engine.
  • 0 L.
  • Tier 3.
  • 4 stroke diesel.
• Transmission: 2 spd powershift + 4 creeper speed.
• Swing drive:
  • Liebherr swash plate motor with integrated brake valves.
  • Torque: 84 nm.
  • Speed: 8.2 RPM stepless.
• Fully enclosed Operator’s Cab.
  • Elevation: 6 ft. riser.
  • Rear view camera.
• Reach/Stick:
  • 24 ft. 11 in. boom.
  • 19 ft. 8 in. stick.
• 4 independent hydraulic outriggers.
• Tires: 20.5-25.
• Located: Eastern U.S.A.

 View more Log Loaders

LittleFuse 90 Amp Class RK5 Fuse ID: 168285

• 600 VAC
• Class RK5
• Type: FLSR90
• Dual Element Time Delay
• Style: Knife Fuse
• Length: 7.88 in.
• Quantity 2

View More 90 Amp Fuses

22in Diameter Manhole Cover ID: 1412615

22in Diameter Manhole Cover

• Cover: 22in Dia.
• Flange: 31.75in Dia.
• Mounting Depth: 6in
• Slotted Manhole Cover
  
  
• Location: Savona, British Columbia, Canada

View More Building Materials

MCG Size 2 Combination Starter ID: 190366

• 120 - 600 VAC
• Single Phase or 3 Phase
• 25 HP @ 600 VAC 3 Phase
• 20 HP @ 480 VAC 3 Phase
• 10 HP @ 230 VAC 3 Phase
• 5 HP @ 240 VAC Single Phase
• 2 HP @ 120 VAC Single Phase
• NEMA 4x Enclosure
• Stop/Start Push Buttons
• Quantity 1

View More Size 2 Combination Starters

Ansul 8.5 lb Fire Extinguisher ID: 118448

• Ansu Fire Extinguisher.
  • 2 available.
    • Size: 8.5 lb. 
    • Class ABC.
    • Comes with: 
      • Wall mount bracket.

Please contact us for more information.

CAT 1250 kW 480 Volt Diesel Generator ID: 947978

• Voltage: 480 Volt
• Hour: 1
• Year: 2005
• Model: 3512B
• Sound Attenuated Enclosure 
• Tier 1/2000 Gallon Fuel Tank 
• Location: Western USA

View more Generator

Square D 30 kVA Transformer ID: 198217

• 30T65H.
• Primary: 600.
• Secondary: 208Y/120.
• Ph: 3.

View more 30 kVA Transformers

John Deere 1025R FILB Utility Tractor ID: 136358

• John Deere 1025R Utility Tractor.
  • Year: 2014.
  • Hours: 67.
    • In nearly new condition.
  • Equipped with:
    • Factory installed loader backhoe,
      • Includes:
        • H120 loader.
          • 955 lb (434 kg) lift capacity.
        • 260 backhoe.
          • Curved boom design for greater utility and strength.
        • Hydraulic stabilizers.
    • 25 hp diesel engine.
    • Twin touch hydrostatic transmission.

Please contact us for more information.

12 in x 8 in Reducer Flange ID: 157060

• 12 in. to 8 in.
• 1 in. bolt holes on 12 in. side - 12 holes.
• ¾ in. bolt holes on 8 in. side - 8 holes.

Please contact us for more information.

View our full inventory of Pipe Fittings

2012 Sandvik DT820 Jumbo Drill ID: 1406728

2012 Sandvik DT820 Jumbo Drill

• Make: Sandvik
• Model: DT820
• Type: 2-Boom Jumbo
• Year: 2012
• Hours:
  • Engine: 6,562 Hours
  • Left Boom: 3,215 Hours
  • Right Boom: 3,435 Hours
  • Electric Motors: 6,338 and 6,050 Hours
• Condition: Used Condition

• View Spec Sheet Below

• General Model Key Features:
  • Coverage Area: 110 m² (14,210mm x 8,420mm)
  • Hydraulic Rock Drill: (2) HLX5 (20 kW)
  • Drill Feed: (2) TF500-16’
  • Boom: (2) SB90
  • Control System: THC560, Hydraulic
  • Hole Length: Up To 6,180mm
  • Turning Width: (T-section) 4,840 mm (with TF500-16’)
  • Transport/Drilling Width: 2,500mm/3,000mm
  • Transport/Drilling Height: 2,750mm/3,600mm
  • Transport Length: 14,930mm (with TF500-16’)
  • Total Weight: 26,500 kg (depending on options)
    
    
• Location: Türkiye

View More Jumbo Drills

Steel 6 in. Channel ID: 78145

• 6 in. depth.
• 2.5 in. width.
• 3/16 web thickness.
• 20 ft. Lengths.

Code Electric 600 Amp Splitter Trough ID: 186701

• 4 Wire
• 600 VAC
• 48" x 10" x 6"
• NEMA 1 Enclosure
• Quantity 1

View More Splitter Troughs

Laron IM13R Primary Impact Crusher ID: 1397543

Laron IM13R Primary Impact Crusher

• Make: Laron
• Model: IM13R
• Series: IM
• Type: Primary Impact Crusher
• Condition: Used, Reported in Good Condition, Ready-to-Work
• Feed Opening: 61.4in x 55.1in (1,560mm x 1,400mm)
• Capacity: 150/300 Tonnes Per Hour
• Stones Admitted: 1,000 kg
• 3 Impact Plates
  
  
• Drive: Helmke Electric Motor
  • Power Output: 200kW (268HP)
  • Speed: 1490 RPM
  • Voltage: 400/690 Volt
  • Current: 332/183 Amps
  • Frequency: 50Hz
    
    
• Overall Dimensions: 
  • Length: 138.7in (3,525mm)
  • Width: 126.7in (3,220mm)
  • Height: 145.5in (3,695mm)
  • Weight: 41,900 kg
• Location: Spain

View More Impact Crushers

150 Yard Wash Plant ID: 211074

• Custom Built
• Capacity: 150 YPH depending on ground
• Three Deck Vibrating Screen Deck.
  • ¼ inch Smallest Screen
• Includes 6ft Wide x 16ft Long Sluice Box With Miner's Moss
• Cat Generator
  • Output: 125kW
  • Approx. 150-200 Gallon Fuel Tank
  • Mounted on I-Beam Skids
• Contact Us for More Information

View More Gold Wash Plants

C-09D Contactor ID: 633688

Cat No: C-09D

AC3: 9A 440V~

UI: 1000V

AC1: 20A

600V~

Siemens FCRS Distribution Panel ID: 1392521

Siemens FCRS Distribution Panel

• Make: Siemens
• Model: AEWVPAK002
• Type: FCRS
• Style: Distribution Panel
• Amperage: 800 Amps
• Voltage: 120/208 Volts (600 Volt Max Rating)
• Poles: 3-Pole
• Wire: 4 Wire
• Breakers Include:
  • (6) 200 Amp, 3-Pole
    • Type: QJ23B200H
  • (3) 100 Amp, 3-Pole
    • Type: BLH
  • (1) 60 Amp, 3-Pole
    • Type: BLH
  • (1) 30 Amp, 3-Pole
    • Type: BLH
  • (1) 100 Amp, 2-Pole
    • Type: BLH
      
      
• Dimensions:
  • Width: 38in
  • Depth: 17in
  • Height: 90in
    
    
• Location: Savona, British Columbia, Canada

View More Breaker Panels

MSI Xtruder 255 Concentrating Table ID: 1424719

MSI Xtruder 255 Concentrating Table

• Make: MSI
• Model: Xtruder 255
• Type: Concentrating Table
• Condition: Used, Reported in Good Condition
• Capacity: Up To 255 Lbs/Hr.
• Recovers Fine Gold Down To 400 Mesh
• Full Variable Speed Control And Simple To Operate
• Voltage: 115 Volt - Single Phase
• Minimal Water Requirement: 6 to 10 Gallons Per Minute
  • Fresh Water Can Be Used or Pumped With Its Own Recirculation Pump
  • Water Is Filtered And Reapplied At The Precise Pressure Needed
• MSI Xtruder Table is Similar To A Gemini Table And Is Considered a Gold Shaking Table Or A Gold Finishing Table
• These Concentrating Tables Are Used In The Final Step Before Smelting
  
  
• Location: Northwest USA

View More Gold Concentrating Tables

Watch YouTube Video Here: https://www.youtube.com/watch?v=pc8oy0f4WLQ 

1 in. Air Hose c/w Fittings. 2 Rolls. ID: 43890

• 1 in. Air Hose c/w Fittings. 2 Rolls.

Caloritech 60 kW Immersion Heater ID: 119409

• Caloritech 60 kW Immersion Heater.
  • Model: CXI960F663R-001.
    • Serial no: W003371.
    • 575V.
    • 3 phase.

Please contact us for more information.

Winkie GW-15 Exploration Diamond Core Drill Package ID: 1410451

Winkie GW-15 Exploration Diamond Core Drill Package

• Make: JKS Winkie
• Model: GW-15
• Condition: Good, Used Condition
• Location: Alaska
• Power Unit: Gasoline, 2-Cycle, Air-Cooled
  • Power Output: 10HP @8,400 RPM
• Gear Shift Transmission: Oil Bath
• Type of Feed: Unipress Hand Feed
• Clutch: Centrifugal
• Max Bit Speed:
  • High Gear: 2,800 RPM
  • Low Gear: 1,200 RPM
• Floor Space: 21in Wide x 21in Long (53cm x 53cm)
• Weight: 
  • Winkie: 75 Lbs.
  • Unipress: 90 Lbs.
• What’s Included:
  • Bronco Pump
  • Gas Tank
  • Various Rods, Bits, Core Barrels, and Additional Tooling, Per Listed Photos
    
    
• Drilling Capacities:
  • Hole Depth Core Size: E-Core
    • Core Barrel: E-Core Thin Kerf IAWS
    • Core Diameter 1in (23mm)
    • Hole Diameter 1-1.5in (38mm)
    • Depth: 425-475ft (130-145m)
      
      
  • Hole Depth Core Size: A-Core
    • Core Barrel: A-Core Thin Kerf IAWS
    • Core Diameter 1.39in (35.3mm)
    • Hole Diameter 1.89in (48mm)
    • Depth: 350-400ft (105-120m)
      
      
• View Spec Sheet Below
  
  
• Location: Alaska

View more Diamond Core Drills

Derocker Finger Feeder ID: 1219572

Derocker Finger Feeder

• 4 Separator Shelves
  • 8 Grizzly Type Bars
  • 2in Dia. x 30in Long
• Hydraulic Drive
  
  
• Overall Dimensions:
  • Length: 13ft
  • Width: 7ft
  • Height: 8ft
    
    
• Location: Savona, British Columbia, Canada

View More Derockers 

Federal Pioneer 200 Amp Fusible Disconnect ID: 1414945

Federal Pioneer 200 Amp Fusible Disconnect

• Make: Federal Pioneer
• Model: Switchmatic
• Type: Disconnect
• Style: Fusible
• Current Rating: 200 Amp
• Voltage Rating: 600 Volt
  
  
• Location: Savona, British Columbia, Canada

View More 200 Amp Disconnects

Netzsch NM038 Stator ID: 1363126

Netzsch NM038 Stator

• Make: Netzsch
• IDENT: 157539
• COMM: L51005441
• Stator NM038 02S
• Diameter: 4in
• Length: 19.5in
• S Geometry 
• For NM 038 02S Progressive Cavity Pump
  
  
• Location: Savona, British Columbia, Canada

View More Pump Parts

Federal Pioneer 3 Pole 15 Amp Bolt-on Breaker ID: 161665

• Cat #: NB315
• 120-240 VAC
• 3 Phase
• Quantity: 3

View More 15 Amp Breakers

2021 Merlo Telehandler ID: 1423135

2021 Merlo P120.10HM Telehandler

• Make: Merlo
• Model: P120.10HM
• Year: 2021
• Hours: 497 Hours
• Condition: Used, Reported in Good Condition
• Fuel: Diesel
• Cab Heated and Cooled

• General Model Specifications:
  • Unladen Weight: 35,715lbs
  • Max Load Capacity: 25,000lbs
  • Lift Height: 32ft
  • Max Reach: 17ft 5in
  • Lift Height at Max Load Capacity: 25ft 5in
  • Reach at Max. Load capacity: 5ft
  • Load Capacity at Max. Lift Height: 10,000lbs
  • Load Capacity at Max Reach: 6,000lbs
  • Boom Side-Shift: +/= 7,3in
  • Frame Levelling %: +/-8%
  • Boom Section: 2
  • Engine: FPT NEF45 - Tier 4
    • Power Output: 125kW (170HP)
    • Number of Cylinders: 4
    • Displacement: 4.5L
    • Fuel Type: Diesel
  • Fuel Capacity: 40gal
  • Max Speed: 25mph
  • Hydrostatic Transmission: CVTronic

• Location: Western Canada

View More Zoom Booms

Bullet 70 Amp Class RK5 Fuse ID: 170422

• 600 VAC
• Class RK5
• Type: ECSR70
• Dual Element Time Delay
• Style: Knife
• Length: 7.88 in.
• Quantity 3

View More 70 Amp Fuses 

4ft. 7in. wide x 5ft. 10in. long Hopper Shaker Deck ID: 314786

• Hopper: 4ft. 7in. wide x 5ft. 10in. long
  • Includes Water Jets
• Skid Mounted
• 5ft. 5in. Overall Height
• Grill Opening 
  • 3ft. x 4ft.
  • Solid Rod Steel
• Comes with:
  • 110 Volt Motor
  • Sluice  Tray
  • Extra Mining Parts
• Location: Western USA

View more Gold Wash Plants

General Electric 3 Pole 125 Amp Breaker ID: 339919

Style= TFJ236125

600 VAC

Adjustable Trip

600-1250A

Westinghouse 400 Amp Breaker Panel ID: 158012

• Circuits: 42.
• 120/208V.
  • 3 phase.
• 4 wire.
• (4) 15 amp breakers - single pole.
• (1) 30 amp breaker - two pole.
• (1) 30 amp breaker - three pole.
• (7) 40 amp breakers - three pole.
• (1) 50 amp breaker - three pole.
• (2) 60 amp breakers - three pole.
• (1) 100 amp breaker - three pole.

Please contact us for more information.

View more 400 Amp Panels

View Our Inventory of Breakers

English Electric 200 Amp 600 Volt Fuse ID: 530686

Amp: 200

Volt: 600 or less

CAT#: CF200

4,500 Liter Steel Buriable Double Wall Fuel Tank ID: 1405859

4,500 Liter Steel Buriable Double Wall Fuel Tank

• Make: Tidy Steel Fab
• Type: Buriable Fuel Tank
• Condition: Used, Reported in Good Condition
• Previous Usage: Underground Diesel Fuel Tank
• Capacity: 4,500 Liters (1,189 US Gallons)
• Size: 
  • Diameter: 50in Dia.
  • Length: 144.5in Long
• Construction: Double Wall, Steel
  • Inner Shell Thickness: 3mm
  • Outer Shell Thickness: 3mm
• Year: 1992
• Riser: 33.5in Tall
• Inlets/Outlets:
  • (1) 4.5in On Tank
  • (1) 3.5in On Tank
  • (1) 4.5in On Riser Side
  • (1) 2.25in On Riser Top
• Max Operating Pressure: 7kPa
• Max Operating Vacuum: 300Pa
  
  
• Location: Savona, British Columbia, Canada

View More Fuel Tanks

Michigan Fluid Power 6000 PSI Hydraulic Pump ID: 202282

• Manufacturer: Michigan.
• Heat exchanger model: RM-24-22.
  • PSI: 300.
• MFPU - 15947.
• Max Temp: 350 F.
• Hydraulic Fluid: AW-46.
• Replacement Pump #: PVP 33303RM-X4556.
• Quantity: 2.

View more Hydraulic Pumps

100 TPD Ore Processing Plant ID: 151399

• Desite SLG - 78 screen.
• 12 ft. x 12 ft. feed hopper under screen.
• 24 in. x 10 ft. feeder belt.
• 36 in. x 30 ft. conveyor.
  • With 10 hp motor.
• (2) 24 in. x 20 ft. conveyor.
  • With 3 hp motor.
• 6 ft. x 7 ft. ball mill.
  • With 100 hp electric motor.
• 60 in. Sweco screen.
• 12 in. x 15 ft. conveyor.
• 12 in. x 12 ft. conveyor.
• 4 ft x 6 ft. screw auger.
• (3) Wilfley K series slurry pump.
• (2) Lightnin 1/3 HP mixers.
• 3 in. x 1.5 in. Goulds pump.
• (3) compressors.
• 32 ft³ flotation cells.
• 24 ft³ Denver flotation cells.
• 240 ft³ Wemco flotation cells.
• 4 ft. x 4 ft. conditioning tanks.
  • With agitators.
• 2 ft. x 2 ft. conditioning tanks.
  • With agitators.
• 4 in. x 12 ft. screw auger (built on site).
• 6 in. x 5 ft. feed auger (bought and modified).
• 14 in. x 12 ft. dryer.
  • With VFD controls.
• 3,000 gallon cistern.
• 6,000 gallon cistern.
• 20 in. x 36 ft. conveyor.
• (3) 3 in. x 2 in. Goulds water pump.
• 7.5 hp Goulds pump.
• 1 in. submersible pump.
• 2 in. submersible pump.
• 3 in. submersible pump.
• 2 in. Piranha floating pump.
  • With floats.
• (2) 4 in. Piranha floating pump.
  • With floats.
• (2) 12 in. x 12 ft. sand screw/classifier.
• (2) 24 in. x 30 ft. conveyor.
  • With 5 hp motor.
• Bench top Wemco lab flotation cell.
• (4) pump tank.
• Lab oven in tent.
• Lab grinder in tent.
• Lab scales.
• Lab Tote mixer/agitator.
• (5) 3 in. hydro cyclones.
• (3) 4 in. hydro cyclones.
• (4) 4 in. hydro cyclones.
• (2) 6 in. hydro cyclones.
• Barrels and totes for reagents.
• Fire safety equipment.
• Safety gear (first aid kits, glasses, gloves, hard hats, etc.)
• Magnetic separator.
• Attrition scrubber.
• Cross flow separators/teeter beds.
• (2) Clow shallow sump pumps.
• (2) 90 gpm, 5 hp well pumps.
• New 3 in. x 2 in. Goulds water pump.
• (8) chemical dosing pumps.
• (8) PH monitors.
• (4) drum/barrel heaters.
• Large, upright fan.
• (2) small fans.
• (2) work lights.
  • With stands.
• (2) 100 gallon plastic water troughs.
• (2) 50 gallon metal water troughs.
• 1,000 gallon steel tank.
• (2) 4 ft. x 4 ft. x 4 ft. reagent mixing tanks.
• Gas powered trash pump.
  • With 2 in. discharge.
• Kerosene ready heater.
• (5) magnetic tank heaters.
• Agitator with geardrive (CT-2).
• Lab hood with under bench chemical storage.

Please contact us for more information.

Warman Weir 6 in. Knife Gate Valve ID: 968032

• Model: O6AKRSXAUSC
• 316SS Teflon Coated Gate 
• Air Cylinder Operator Open-Close 
• Includes 
  • LS Brackets
• Location: Eastern USA

View more Knife Valves

Myers Seth 6 in Vacuum Assisted Trash Pump ID: 166690

• Model: DP-150.
• Dry Prime series.
• Deutz 4 cylinder diesel engine.
  • Model: F4L 2011.
• Hours: 5,800.
• Single axle chassis.
• Built in 65 gallon fuel tank.
• 6 in. inlet & discharge.
  • Camlock fittings.
• Located in Savona, British Columbia. Canada.

View Spec Sheet Below

View more Trash Pumps

EXM 600 Amp Splitter Box ID: 166471

• N.CatN. 1400 B603.
• Max. 600V.
  • 3 phase.
• 3 wire.

• Dimensions (L x W x H):
  • 9 in. x 25 in. x 26 in.
  • 23 cm x 64 cm x 66 cm.

View more Splitter Boxes

Moyno 2 HP Progressive Cavity Pump ID: 193829

• SEW Eurodrive 2 HP Motor:
  • Volts: 380-500V.
  • RPM: 285-1720.
  • Amps: 3.1.
  • Hz: 30-60. 
  • S.F.: 1.15.
  • Duty: Cont.
  • Maximum Ambient: 40 Degrees Cels.
• Dimensions: 58 In. x 16 In. x 30 In. (L x W x H).
• Weight: 228 lbs. 

View more Positive Displacement Pumps 

Soilmec SF-50 Rotary Drill ID: 139617

• Soilmec Rotary Drill.
  • Year: 2011.
  • Model: SF-60.
    • Hours: 4,019.
  • Equipped with:
    • DMS computer mounted.
    • Hydraulic auger cleaner.
      • PT 10586.
    • Short extension.
    • Long extension.
• Location - Europe
  • Please see the specs tab below for more detailed information.
    • Specs

Please contact us for more information.

Peristaltic Pump Dispensing and Filling System ID: 629590

• Comes with 4 Knight Model P-900 Series pumps.
• Each unit driven by a 1.2 amp, 115 volt motor.
• All mounted in a 12” X 12” X 48” hinged steel cabinet.
• Location: British Columbia, Canada

View more Hose Pump

Cutler Hammer 2Pole 200 Amp Breaker ID: 340205

Style=CSR2200

120/240 VAC

Square D 60 Amp Non Fusible Disconnect ID: 1075130

Square D 60 Amp Non Fusible Disconnect

• Make: Square D
• Type: Non-Fusible
• Current: 60 Amp 
• Voltage: 600 Volt 
• NEMA 3R Enclosure 
• Comes with Start/Stop Button in Door
  
  
• Location: Savona, British Columbia, Canada

View more Disconnects

Cooper Bussman 1.25 Amp Class RK5 Fuse ID: 166838

• 600 VAC
• 300 VDC
• Class: RK5
• Type: FRS-R
• Length: 5 in. 
• Quantity 5

View More 1.25 Amp Fuses 

FEDERAL PACIFIC ELECTRIC 30 AMP 2 Pole STAB-LOK BREAKER ID: 366194

2 Pole

AMP: 30

Style: Push On

Type: NA

Single Phase

Cutler-Hammer Magnetic Coil ID: 1387368

Cutler-Hammer Magnetic Coil

480V 60CY

440V 50CY

1887-3

• Location: Savona, British Columbia, Canada

US Electric Shaft Mounted Reducer ID: 287756

• Model: SMR315
• Ratio: 25-1
• Input Shaft: 2 1/8 in. 
• Output Bore: 4 13/16 in.
• Location: Western Canada

View more Shaft Mounted Reducers

Allis Chalmers 25 HP Motor ID: 175134

• 230/460V.
• 1740 rpm.
• Frame: 884T.
• 60/30A.
• TEFC enclosure.
• Continuous duty.

View more 25 HP Motors

Unit Rig + Equip Drawworks Hoist ID: 825016

• Model: U-1220-EB
• Complete with 
  • Control Panel 
  • 56 inch Wide Drum 
    • Inside diameter 34 inches 
    • Outside diameter 60 inches
  • Drum Brake
  • Dynamic Brake
  • Twin - 2500 horsepower GE 752 traction motors
• All Mounted on Common Operating Steel Frame 
• Location: Western Canada

View more Oilfield Equipment 

4000/5 Westinghouse Current Transformer ID: 1274792

4000/5 Westinghouse Current Transformer

Ratio 800:1

Style: 680D441L20

Serial: 76624

CSA Accuracy at 60Hz: 2.5L200, 0.3B2.0

Class 6 KV

Orinnell 6in Pinch Valve ID: 1393719

Orinnell 6in Pinch Valve

• Make: Orinnell
• Size: 6in Inlet/Outlet
• Type: Pinch Valve
  
  
• Overall Dimensions:
  • Length: 16in
  • Width: 11in
  • Height: 24in
    
    
• Location: Savona, British Columbia, Canada

View More Pinch Valves

80kW Cummins Diesel Generator ID: 1420362

80kW Cummins Diesel Generator

• Make: Cummins
• Model: DSFAE-6833706
• Year: 2011
• Hours: 4,398 Hours
• Condition: Used Condition
• Duty: Standby or Prime
• Fuel: Diesel
• Portable/Stationary: Stationary
• Comes With: 
  
  • Enclosure
  • Main Breaker
  • Muffler
• Engine: 4 Cylinder Cummins Diesel Engine

• Generator: 
  • kW/kVA: 80kW (100kVA)
  • Rotation Speed: 1,800RPM
  • Voltage: 277/480 Volts - 12 Wire Reconnectable
  • Current: 120.3 Amps @ 277/480 Volts
  • Frequency: 60Hz
  • Phase: 3-Phase or Single Phase

• Location: Southeast USA

View More 51-100kW Diesel Generators

Cutler Hammer 120 Volt Size 3 Coil ID: 178533

• 120 VAC @ 60 Hz
• 110 VAC @ 50 Hz
• Cat #: 505C633G01
• Quantity 1

View More Size 3 Coils

Merrick Weigh Belt Feeder ID: 233486

• Model: 950
• 25 HP Baldor Motor
• 90 Volts
• 1750 RPM
• TENV
• Frame: 56C
• Sumitomo SM-Cyclo Gear Reducer:
  • 121:1 Ratio
  • Model: H 3075/07
• Belt Feeder Box Dimensions:
  • 52"L x 20"W x 15"H
• Belt Dimensions:
  • 44"L x 16"W
• 10" x 8" Inlet with Slide Gates
• 49" x 11" H Side Viewing Door
• Location: Eastern USA

View more Converyors