Quotes

Allen Bradley PowerFlex700 5 HP VFD ID: 172464

Input
- 475 - 632 VAC
- 5.3 Amps
- 47-63 Hz
Output
- 0 - 600 VAC
- 6.1 Amps
- 0 - 400 Hz
Cat #: 20BE6P1A0AYNANDO
Series B
Line Reactor
Mounted in Allen Bradley 2100 Series MCC Bucket
Control Transformer
- 0.080 KVA
- 600/120 VAC
10 Amp Class J Fuses
Cooling Fan
Controller on Door
Will Sell VFD Seperately

View More 5 HP VFDs

Manufacturer:

ALLEN BRADLEY

View details Remove

490kW CAT 3508 Natural Gas Generator ID: 1222590

490kW CAT 3508 Natural Gas Generator

Make: Caterpillar
Model: 3508
Duty: Continuous
Year: 1998
Condition: Used, Reported in Very Good Condition
Portable/Stationary: Portable, Skid Mounted
Engine: Caterpillar Engine Model 3508 STD Gas
- Hours: 4.5 Hours Since New
- Oil: Capacity - 227 L (60 U.S. Gal)
- Radiator: Air to Air, Charge Air Cooled, Capacity - 309 L (81.6 U.S. Gal)
Generator: CAT SR4B
- kVA/kW: 490kW (612 kVA)
- RPM: 1500 RPM
- Voltage: 415/240 Volts
- Amperage: 883 Amps
- Frequency: 50Hz
- Phase: 3-Phase
- Control Panel: Caterpillar Control Panel
Additional Information:
- Skid Mounted
- Gas Train
Overall Dimensions: Approx.
- Length: 144in
- Width: 85in
- Height: 84in
- Weight: 16,800 Lbs (7627 Kgs.)

Location: Europe

View More 501-1000kW Diesel Generators

View details Remove

Puritan Magnetics 16 in. Wide Cross Belt Magnet ID: 516929

Model: CSBLB24POWR
Belt: 16 in. Wide x 54 in. Long
Magnet Dimensions: 16 in. Wide x 22 in. Long x 8 in. Deep
Magnet strength 1500 Gauss.
Head and Tail Pulley: 8: Dia. x 18 in. Long
Overall Dimensions: 36 in. Wide x 54 in. Long x 18 in. Deep
Right Angle Gear Head Motor
- Ratio: 15:1
- Tigear²
- Part/Model: 20Q15H56
Baldor Motor
- 1 HP
- 230/460 Volt
- 1760 RPM
  Frame: 56C
Location: British Columbia, Canada

View more Belt Magnets

View details Remove

1979 Grove TM 875 80 Ton Crane ID: 1242367

1979 Grove TM 875 80 Ton Crane

Make: Grove
Model: TM 875
Capacity: 80 Tons
Type: Hydraulic
Year: 1979
Hours: 3,953 Original Hours
Miles: 14,100 Original Miles
Condition: Used, Reported in Good Condition, Job Ready
Dual Engines
- Carrier Engine: CAT 3206
- Super Structure Engine: CAT 3208
Latest Load Electronics
See Spec Sheets For More Info
Location: Southwest USA

View More Mobile Cranes

View details Remove

Cefco 400 Amp 250 Volt Fuse ID: 526253

Amp: 400

Volt: 250 or less

One Time Fuse

View details Remove

Gorman Rupp 6 in Diesel Trash Pump ID: 180644

Inlet: 6 in. (150 mm).
Outlet: 6 in. (150 mm).
Max. capacity: 1810-2700 GPM.
Max. head: 150-195 ft.
Max. solids: 3 in. (75 mm).

Please contact us for more information.

View more Trash Pumps

View details Remove

Littelfuse INDICATOR Time-Delay 20 amp fuse ID: 360843

20 AMP

600VAC or less

Class: RK5

Length: 5"

Time Delay

View details Remove

Cummins 80kW Diesel Generator ID: 1403559

Cummins 80kW Diesel Generator

Make: Cummins
Model: C80D6R-1401512
Year: 2014
Hours: 4,554.4 Hours
Condition: Used Condition
Duty: Standby/Prime
Portable/Stationary: Portable - Trailer Mounted
- 3in Pintle Hitch
Engine Model: QSB5-G2 Tier III
Fuel Type: Diesel
kVA/kW:
- Prime: 72kW (90kVA)
- Standby: 80kW (100kVA)
Rotating Speed: 1800 RPM
Voltage: 277/480 Volts - 12 Wire Reconnectable
Current:
- Prime:
  - 120/208 Volts: 249.8 Amps
  - 120/240 Volts: 200.8 Amps
  - 139/240 Volts: 216.5 Amps
  - 277/480 Volts: 108.3 Amps
- Standby:
  - 120/208 Volts: 277.6 Amps
  - 120/240 Volts: 223.3 Amps
  - 139/240 Volts: 240.6 Amps
  - 277/480 Volts: 120.3 Amps
Frequency: 60Hz
Phase: Single or 3-Phase
Multiple Voltage Selector Switch
Enclosure: Sound Attenuated
27 Hour, 606 Liter Base Fuel Tank
Overall Dimensions: With Trailer
- Length: 4,495mm (177in)
- Width: 1,905mm (77in)
- Height: 2,083mm (85in)
- Weight: 2,414 kg (5,322 lbs.)
Location: Western Canada

View More 51-100kW Diesel Generators

View details Remove

Spendrup 42 in. Mine Ventilation Fan ID: 85043

Model: EM 1120-70-6.
100 hp electric motor.
- 460 volt.
- 1765 rpm.
- 405T frame.
Curve available.
Please inquire for additional details.

Manufacturer:

SPENDRUP

View details Remove

Montabert CPA X-TEND Boom ID: 1121082

Montabert CPA X-TEND Boom

Make: Montabert
Model: 24/20
Condition: Good, Used
Hours: 1200 Percussion Hours
Feed Rail Looks to be in Very Good Condition
Feed will take 24' Lead Steel and One 20' in Single Rod Holder
T-51 Rods - Most Un-Used (x5)
Comes With HC150 RP Montabert Drifter
Includes Compressor (2,400 Hours)

CPA X-Tend Drilling Attachment

Works with HC150 RP or HC160 RP Montabert Drifters (based on model type)
76-140mm Hole Diameter
45-51mm Rod Diameter
3.6-28 Meter Maximum Hole Length (based on model type)
2170-2530 Blows/min
Wired Control Panel
Dimensions: 32' 8" Long x 4' 5" Wide x 6' Tall
Weight: 2820Kg
Carrier Characteristics
- 22 to 35 Metric Tons
- 88kW (119HP) Minimum Power Required
- 195 l/min (51gpm) Required Oil Flow
- 195 bar (2800 PSI) Required Oil Pressure