Quotes

Square D Control Panels ID: 1388327

Square D Control Panels

Class: 900T

Type: SKY-3

Series: D

Location: Savona, British Columbia, Canada

View details Remove

Marod 4 ton Battery locomotive. 24 in. track guage. ID: 42082

Marod 4-Ton Locomotive.
Comes With Drum Controller.
Handle Wheel Brake.
Dual 60-Volt Motors.
Type V-49-6-4.
24-Inch Gauge.
Complete With Battery Box.

View details Remove

ITE (Blueline) 2 Pole 30 Amp Push-in Breaker ID: 164982

120-240 VAC
2 Pole
Push-in
Quantity 9

View More 30 Amp Breakers

View details Remove

Andritz 1000mm Sidebar Filter Press System ID: 1126139

Andritz 1000mm Sidebar Filter Press System

Quantity: 4 Units (2x 1000/95, 70 Chamber Units)

(2 x 1000/40, 24 Chamber Units)

70 Chamber Units
- Make: Andritz
- Model: 1000/95, Mixed Pack Membrane
- Machine Type: 1000/HP/SR/70/32mm Filter Press
- (70) 32mm Chambers
- Type: Closed Filtrate
- Condition: New, Never Used
- No. of Stay Boss: 4
- Serial #'s: 12014, 12015
- Slurry Type: Silicate
- Inlet Consistency: 11-15% TSS
- Cake Density: 75 lb/ft³
- Slurry Temperature: 75°C Max
- pH: 0
- Guaranteed Cake Solids: 52%
- Maximum Cycle Time: 80 Minutes
- Size of Press: 1000 High Pressure
- Cake Thickness (Pre-Squeeze): 32 mm
- No. of Chambers: 70
- Filter Area: 1,217 ft²
- Capacity 1.56 m³ / 55ft³
- Pack Length: 514.73cm
- Weight of Empty Press: 15.88 Tonnes
- Hydraulic Unit: 5 HP
- Power Supply: 575V, 3-Phase, 60 Hz
- Plate Material: Polypropylene
- Slurry Feed Pressure (Max at 75°C.): 65 psi @ 75°C
- Squeeze Pressure (Max at 75°C.): 141 psi @ 75°C
- Flooded Weight of Machine: 20.412 Tonnes
24 Chamber Units
- Make: Andritz
- Model: 1000/40, Mixed Pack Membrane
- Machine Type: 1000/HP/SR/24/32mm Filter Press
- (24) 32mm Chambers
- Type: Closed Filtrate
- Serial #'s: 12016, 12017
- Condition: New, Never Used
- No. of Stay Boss: 4
- Slurry Type: Iron Hydroxide
- Inlet Consistency: 3% TSS
- Cake Density: 83 lb/ft³
- Slurry Temperature: 65°C Max
- pH: 13
- Guaranteed Cake Solids: 52%
- Maximum Cycle Time: 120 minutes
- Size of Press: 1000 High Pressure
- Cake Thickness (Pre-Squeeze): 32mm
- No. of Chambers: 24
- Filter Area: 417 ft²
- Capacity: 0.5352m³ / 19ft³
- Pack Length: 183.92cm
- Weight of Empty Press: 10.89 Tonnes
- Hydraulic Unit: 5 HP
- Power Supply: 575V, 3-Phase, 60 Hz
- Plate Material: Polypropylene
- Slurry Feed Pressure (Max at 75°C): 65psi @ 75°C
- Squeeze Pressure (Max at 75°C.): 141psi @ 75°C
- Flooded Weight of Machine: 11.74 Tonnes
Filter Cloths
- Composition: Polypropylene
- Weight: 318.76 (grams/m²)
- Caliper: 0.46mm
- Porosity: 3-5 CFM
- Thread Count: 107 x 36
- Warp Yarn: Monofilament Black
- Filling Yarn: Multifilament
- Finish: Heat Set & Calendared
- Style: AFP 101
- Attachment: Plastic Tie
Hydraulic Power Pack
- Nominal Motor Rating: 5 HP
- Voltage: 575 Volt
- Piston Diameter: 254mm
- Piston Rod Diameter: 127mm
- Piston Stroke (Maximum): 762mm
- Tank Volume: 113.57 Liters
- Pump Conveying Stream, 4500 psi: 18.93 Liters/Minute
- Pump Conveying Stream, 4500 psi: 8.71 Liters/Minute
- Motor Speed: 1750 RPM
- Enclosure: IP55
Location: Canada

View More Plate Filters

View details Remove

1400 Gallon Steel Vessels ID: 1155873

1400 Gallon Steel Vessels

Quantity: 3

Size: 1400 Gallon Approx.
- Diameter: 72in
- Height: 72in
Steel
Non-Lined
On Stands
Location: TBA

View More Steel Tanks

View details Remove

Eaton 400E Amp Fuse ID: 236939

Model Number: 5BHLE - 400E
5.5 Max KV
400E Amps
50/60 Hz
Max Int 65
Location: Western Canada

View more Fuses

View details Remove

10,000 Gallon Portable Fuel Tank ID: 1014765

Size: 10,000 Gallon
Portable Single Axle
Insulated and Skinned
Side Ladder and Inspection Platform
Rear Mounted Diesel Pump and Fuel Strainer Pump
Location: Western USA

View more Fuel Tanks

View details Remove

2ft x 4ft Dillon 3-Deck Screen ID: 1394030

2ft x 4ft Dillon 3-Deck Screen

Make: Dillon
Model: 35.2.4.1
Serial: 2732.81
Type: Inclined Screen
Condition: Used, Reported in Fair Condition
Decks: 3-Decks
Top Deck Spacing: 1in x 1in
Middle Deck Spacing: 0.5in x 0.5in
Bottom Deck: No Screen Installed
Screen Area: 21in Wide x 48in Long (1,008in² Per Deck)
Small Receiving Hopper: 29in Wide x 18in Long x 10in High
Chutes Off Screen Ends:
- Top: 8in Wide x 86in Long
- Bottom: 8in Wide x 40in Long
- 1in Water Feed
With Discharge Hopper: 7.9ft³ Approx.
- 2in Outlet
- Length: 52.5in
- Width: 32.5in
- Height: 24in
Drive: Electric Motor
- Power Output: 3HP
- Voltage: 220/440 Volt
- Frequency: 60Hz
Overall Dimensions: Not Including Discharge Hopper
- Length: 67in (+18in With Chutes)
- Width: 39in
- Height: 51in
Location: Savona, British Columbia, Canada

View More Inclined Screens

View details Remove

Weima Briquetting System ID: 641237

System Components:

Model: TH514
Description: 2 in. Briquetter
Manufacturer: Weima America Inc
Press Type: Hydraulic
Press Diameter: 2 in.
Hours: 1410 hrs.
Hopper Size: 55.1 x 55.1 x 37 in.
Hopper Volume: 2.4 Cubic Yards
Motor Size: 10 hp (7.5kW)
Power: 460v/60Hz/3 Phase
Weight: 2,094 lbs
Machine Size: 94x74x59 in.
Hopper, hydraulics and press are mounted on a frame with anti-vibration foundation
Complete with:
- Hydraulic Oil Cooler
- Over Heating Protection
- Auto Shutoff when Feed Hopper is Empty
This unit has paddles in feed hopper to eliminate bridging and insure proper feeding of press
Condition: Good Working Order

Model: TH814s
Description: 3 in. Briquetter
Manufacturer: Weima America Inc
Press Type: Hydraulic
Press Diameter: 3.1 in.
Hours: 2710 hrs
Hopper Size: 55.1 x 55.1 x 37 in.
Hopper Volume: 2.4 Cubic Yards
Motor Size: 20 hp (15kW)
Power: 460v/60Hz/3 Phase
Weight: 5,600 lbs
Machine Size: 102"x100x59 in.
Hopper, hydraulics and press are mounted on a frame with anti-vibration foundation
Complete with:
- Hydraulic Oil Cooler
- Over Heating Protection
- Auto Shutoff when Feed Hopper is Empty
This unit has paddles in feed hopper to eliminate bridging and insure proper feeding of press
Condition: Good Working Order

Model: wlk 13
Description: Shredder
Manufacturer: Weima America Inc
Hours: 631 hrs
Hopper Opening: 51.2x47.2 in.
Rotor Type: Dia 14.5 in. x 51.2 in. V-Rotor
Cutters: 70 pcs Indexable concave
Extraction requirement: 3000 cfm, 10: diameter
Motor Size: 100 hp (75kW)
Power: 460v/60hz/ 3 phase
Weight: 10,000 lbs
Machine Size: 102x98x75 in.
Control Panel Size: 40x18x71 in.
Shredder has anti-vibration foundation. Hydraulic ram with auto reverse presses material against the rotor for quicker material processing.
Control panel is a stand-alone unit.

Condition: Good Working Order
System includes
- Pipes to Run from Blower to Cyclone.
Takes output from shredder and blows it into cyclone which is currently mounted on the top of our storage hopper.
Cyclone Size: 45x48x72 in. Bolting flange on bottom
Blower Size: 52x56x45 in. Mounted on plate with motor. Belt drive
Weight: Included in shredder weight
Power: 460v/60hz/ 3 phase
Motor Size: 15 hp (11kW)
Hours: 700 hrs
Manufacturer: Weima America Inc
Description: Blower/Cyclone
Model: Pneumatic Discharge System
Model: DFC-24
Description: Dust Collector
Manufacturer: Cleanair America
CFM: 10,000
Cloth Area: 5760 Sq Feet
Motor Size: 15 hp
Power: 220v/60hz/ 3 phase
Weight: unknown
Size: 70x110x170in.
Media: 24 cartridge filters
Dust collector has an air pulse system clean filters at timed intervals and at shut down.
Condition: Good Working Order
Location: Central Canada