Quotes

32in 2100 Allen-Bradley MCC Bucket/15HP Power Flex 40 VFD ID: 1366668

32" 2100 Allen-Bradley MCC Bucket

PowerFlex 40 VFD:

Input: 3 Phase, 460-600V, 48-63Hz, AC Voltage range:414-660, 24.1A

Output: 3 Phase, 0-400Hz, AC Voltage range: 0-575, Continuous Amps 19.0, 60 Sec Ovld Amps: 28.5

X2 Allen-Bradley Line Reactors: 18A/1.5mH/ITH=27A

CAT. 21OOU-TKNKQ22/2

600V/3PH/60Hz

15.0HP/19.0A

Location: Savona, British Columbia, Canada

View details Remove

ROSS Solenoid Coil ID: 1395797

ROSS Solenoid Coil

110/50

110/120.60

83B0

Location: Savona, British Columbia, Canada

View details Remove

Svedala 8 ft x 16 ft RIPL-FLO Inclined Screen ID: 112909

Svedala RIPL-FLO Inclined Screen.
- 8 ft. wide x 16 ft. long. double deck.
  - Top deck: 1¼ inch.
  - Bottom deck: ½ & ¾ inch.
- 20 hp electric drive motor.
- Springs and Base Mounts
- Serial no: 10KA09394.
Location: Woodstock Ontario, Canada.

Please contact us for more information.

View details Remove

CAT 500 kW 600/347 Volt Diesel Generator ID: 629926

Voltage: 600/347 Volt
Hours: 471
CAT 3412DIT Engine
CAT SR4B Generator
Circuit Breaker
- 600 Amp
- 3 Pole
Charging Alternator
Muffler and Flew Supplied New
Block Heater
Set Mounted Automatic Battery Charger
CAT EMCP Electronic Digital Controls
New Batteries
Location: Western Canada

View more Generators

View details Remove

Siemens Premium Efficiency 400 HP Motor ID: 163078

460V.
1785 rpm.
- 3 phase.
- 60 Hz.
449 Amps.

View more 400 HP Motors

View details Remove

2001 National 9103A Boom Truck ID: 214862

Mounted on a 2001 Peterbilt 357.
Cat 350 C10 Engine.
8LL Transmission.
80 percent tires.
2,880 hours on crane.
123,000 miles on truck.
Crane is in excellent condition and ready to work.
Location: Western U.S.A.

View more Crane Trucks

View details Remove

Struthers Dunn 12 Pin Relay ID: 345593

Style=219BBXP

120 VAC

Contact Volt Rating= 230 VAC

Amps=10

View details Remove

16 in. Dia. Stainless Screw Conveyor ID: 201250

16 in. Diameter
Stainless Steel.
Length (feet): 10.
Belt driven through a shaft mount reducer
- 5 HP drive motor
  - 230/460 Volt
  - 1730 RPM
  - 184-T Frame

View more Stainless Steel Conveyors

View details Remove

Square D 60 Amp Non-Fusible Disconnect ID: 1075151

Square D 60 Amp Non-Fusible Disconnect

Make: Square D
Type: Non-Fusible
Current:60 Amp
Voltage: 600 Volt
NEMA 3R Enclosure
Comes with Start/Stop Button in Door
Location: Savona, British Columbia, Canada

View more Disconnects

View details Remove

Ingersoll Dresser 2LLR-11 Split Case Pump ID: 188931

Pump:

Model: Ingersoll Dresser 2LLR-11.
Type: Horizontal, split case and volute.
For: Water and general service.
Impeller diameter: 10.00.

Motor:

Model: US Electric 75 hp motor.
RPM: 3550.
Volts: 230/460v.
Phase: 3.
Frame: 364TS.

View more Split Case Pumps

View details Remove

Square D 2 Pole 20 Amp Breaker ID: 944637

Cat No: FH26030BC

2 Pole

20 Amp

600V

Bolt-on

View details Remove

McCloskey 36in x 80ft Radial Stacker ID: 1216719

McCloskey 36in x 80ft Radial Stacker

Make: McCloskey
Model: 36x80DKT
Type: Radial Stacking Conveyor
Year: 2012
Condition: Excellent Used Condition, Comes with New Belt Installed (Original Belt Torn and Removed)
Working Dimensions:
- Height: 32ft (10m)
- Length: 77ft (23.5m)
- Width: 11ft 2in (3.4m)
Belt Size: 36in Wide x 80ft Long
Capacity: 500 TPH
Stockpile Height: 32ft (10m)
Stockpile Volume: 14,260yd³ (10,900m³) @ 180°
Hydraulic Controlled Head Section - Top Fold
Leg Stabilizers
Wheel Drive
Radial Axles
Feed Hopper
- Length: 6ft
- Width: 5ft
- Height: 3ft
Engine: Kubota 4-Cyl (48HP)
- Model: Y2203-M-EU32
- Hours: 412.2
- Built-In Fuel Tank
Tires: Sentaida Tires
- Size: 255/70R22.5
Transport Dimensions (Approx.)
- Length: 61ft (18.6m)
- Width: 10ft 8in (3.2m)
- Height: 13ft 5in (4.1m)
- Weight: 15,000 Lbs. (6,800 Kgs)
Location: Savona, British Columbia, Canada

View More Radial Stacking Conveyors

View details Remove

3 ft x 12 ft Portable Apron Feeder ID: 95924

8.5 ft W x 16 ft L x 6 ft D feed hopper.
- Bottom 4 ft. steel lined.
- 1-1/2 in. thick adjustable discharge gate.
3 ft x 12 ft apron feeder - 10 ft inside hopper.
- 7.5 in. dia x 4.5 in. face steel bed rollers on 15.5 in. centers.
- 12 in. dia. head and tail sprockets.
- 7.5 hp electric motor belt driven through Reynord Gear box
  - 13.85-1 ratio.
- Chain drive to feeder.
- 6 in. dia. x 4 ft. long flat impact roller section (7 ft. wide discharge plate).
36 in. wide x 37 ft. long discharge conveyor.
- 18 in. rubber head pulley.
- 16 in. self cleaning tail pulley.
- 20 hp electric motor.
  - Direct drive through jack shaft & 9 in. sheave.
- Dodge TXT 5 shaft mount reducer.
- 5 in. 25 deg. idlers and 26 in. spacing.
43 in. long x 21 in. dia. 3 finger rock kicker (8 sections).
Twin axle, dual wheel 5th wheel.
- Front boggie.
- 10.00-22 tires.
Overall dimensions: 9 ft. 6 in. wide, 48 ft. long, and 12 ft. 6 in. high.

View details Remove

Columbus Mckinnon 6 Ton Cyclone Hand Chain Hoist ID: 585309

Model: M
Capacity: 6 Ton
Lift Height: 15 ft.
Location: British Columbia, Canada

View more Hoists

View details Remove

2100kW EMD Diesel Generators ID: 1389303

2100kW EMD Diesel Generators

Quantity: 13 Units

Make: Electro Motive Division
Model: 12-645E1 (11 Units), 16-645E1 (2 Units)
Condition: Used, Reported in Good Condition - Have Been Tested
Hours: 8,500 - 19,000 Hours
Power Output: 12-645E1 - 1,646HP
Portable/Stationary: Stationary
Fuel: Diesel
kVA/kW: 2,100kW (2,625kVA)
Speed: 900 RPM
Voltage: 600 Volts
Frequency: 60Hz
Phase: 3-Phase
Overall Dimensions:
- Length: 8.55m
- Width: 2.3m
- Height: 2.4m
- Weight: 30 Tons
Location: Mexico

View More 2001-6000kW Diesel Generators

View details Remove

Westinghouse 400 HP 575 Volt Electric Motor ID: 667581

HP: 400
Voltage: 575
Frame: 5806B
1800 RPM
Ball Bearing
Location: Western Canada

View more Electric Motors

View details Remove

Manual Tilting Bullion Furnace ID: 683332

Natural Gas/Propane Fired (Currently Set for N.G)
Economite Burner
- Model: DS22
- 225,000 BTU Max
- Inlet Pressure:
  - Natural Gas 5 in. - 14 in. W.G
  - Propane 11 in. - 14 in. W.G.
Honeywell Gas Valve
- Model: VR84402008
110 Volt Controls
Complete with #250 Crucible
- Capacity 1.6 CU ft.
- Approx. 14 in. Dia. ID x 20 in. High
Location: British Columbia, Canada

View more Bullion Furnaces

View details Remove

882 Cubic Foot Aluminum Silo ID: 253953

8' Dia. x 39' High
1/4" Thick all Welded 5052 Aluminum Alloy Construction
Multi-Ported Top Fill with:
- Sloped Cover & Handrail Ring
- Skirted Base
- Eccentric Cone Discharge with:
  - 6"ø Ansi 150 Flange Connection with:
    - 15'-3" Clearance to Base.
Designed for 100mph Max
Wind Loads and Zone I Seismic Conditions
For Dry, Free Flowing Material (60lb cu/ft)
Empty Weight: 5034lbs
Flange on Top of the Aluminum Silo is 24" Square
Location: Eastern USA

View more Silos

View details Remove

Schneider Electric LR2D33 40 Amp Overload ID: 169708

600 VAC
Adjustable: 30 Amps - 40 Amps
N.O. & N.C. Aux. Contacts
Cat #: LR2D3355
Mounts Directly To Any LC1D40, LC1D50, LC1D65 or LC1D80 TeSys Contactor
Thermal Magnetic Overload Relay
Quantity 3

View More 40 Amp Overloads

Manufacturer:

SCHNEIDER

View details Remove

Square D 30A Breaker ID: 1274799

Square D 30A Breaker

1 Pole

View details Remove

Ford F800 Crane Truck ID: 177496

Year: 1980.
818 body.
National Crane 9 ton boom.
- Model: 656.
Boom length: 66 ft.
18 ft. jib.

Please contact us for more information.

View more Crane Trucks

Manufacturer:

INTERNATIONAL

View details Remove

2012 Caterpillar D11T Dozer ID: 1408768

2012 Caterpillar D11T Dozer

Make: Caterpillar
Model: D11T
Year: 2012
Hours: 8,277.4 Hours
Condition: Used, Reported in Excellent Condition

View Spec Sheet Below

General Model Specifications
- Engine – Tier 2 Equivalent
  - Model: Cat C32 ACERT
  - Net Power: 669kW (897HP) SAE J1349/ISO 9249 Min Fan
  - Gross Power: 695kW (932HP) SAE J1995
  - Bore: 145mm (5.7in)
  - Stroke: 162mm (6.4in)
  - Displacement: 32.1 Liters (1,959 in³)
- Transmission:
  - Type: Planetary Powershift
  - Transmission Clutch Diameter: 533mm (21in)
  - Speeds:
    - (1) Forward: 3.9 km/h (2.4 mph)
    - (2) Forward: 6.8 km/h (4.2 mph)
    - (3) Forward: 11.8 km/h (7.3 mph)
    - (1) Reverse: 4.7 km/h (2.9 mph)
    - (2) Reverse: 8.2 km/h (5.1 mph)
    - (3) Reverse: 14 km/h (8.7 mph)
- Undercarriage:
  - Shoe Type: Extreme Service
  - Width of Shoe: 710mm (28in)
  - Shoes/Side: 41
  - Grouser Height: 102mm (4in)
  - Pitch: 318mm (12.5in)
  - Ground Clearance: 675mm (26.6in)
  - Track Gauge: 2,896mm (114in)
  - Length of Track on Ground: 4,444mm (175in)
  - Ground Contact Area: 6.3m² (9,765in²)
  - Track Rollers/Side: 8
- Track Roller Frame:
  - Oscillation: 351mm (13.8in)
- Steering and Brakes:
  - Hydraulically Applied Multiple-Disc Steering Clutch: 440mm (17.3in)
  - Spring Applied Multiple-Disc Brake: 612mm (24.1in)
Location: South America