Gold Machine 100 Trommel Wash Plant ID: 393171

The Model 100 is a full size wash plant capable of processing over 100 cu. yards per hour. The 100 is an ideal size for full scale placer mining operations. Plant is equipment with 55 kW Diesel Generator, vibrating hopper/grizzly system handling aggregate sizes up to 30 inches. 

• Included:
  55 kW John Deere Diesel Generator
  Vibrating Feed Hopper/Grizzly System
  30 in. Tailings conveyor
  Sluices and matting. 

•  Specifications
  • Yardage Processed: 100 Cubic Yards Per Hour
  • Material Size Processed: 30 in. Minus
  • Water Consumption: Approx. 600 Gallons Per Minute (2200 Liters)
  • Feed Methods: 200-300 Series Excavator or 3 to 4 Cu. Yard Wheel Loader

•  Dimensions
  • Length: 39ft. 10in. (12.14 meters)
  • Width: 7ft. 6in. (2.13 meters)
  • Height: 9ft. 6in. (2.74 meters)
  • Weight: 28,000 lbs. (12,700 kg)

• Complete with 
  • 2 x 50ft. 4in. Lay Flat Hose
  • 2 x 25ft. High Pressure Suction Hose
  • 2 x Toolboxes
  • Spare Parts, Chains, Filters, Sprockets ect.
  • 100 Gallon Fuel Tank
  • 6 x Heavy Duty Leveling Jacks (Holland)
  • Custom Built 12in. Heavy Wall Pipe Skid
  • Original Axles/Tires are available and can be installed if required. 
• Approx. 1703 Hours
• Location: Western Canada

View more Trommels

2015 Sandvik DD210 Single Boom Jumbo ID: 1281685

2015 Sandvik DD210 Single Boom Jumbo

• Make: Sandvik
• Model: DD210D
• Type: Single Boom Jumbo Drill
• Year: 2015
• Hours:
  • Engine: 1,595 Hours
  • Hammer: 751 Hours
• Condition: Used, Reported in Very Good Condition
  
  
• General Model Specifications:
  • Cornering: 
    • Inner: 3,400mm
    • Outer: 5,100mm
  • Engine Power: 74kW
  • Feed Length: 5,270mm
    • TF500-12ft
  • Coverage: 24m²
  • Rock Drill: RDX5, 20kW
  • Hole Diameter: 76 - 127mm
  • Hole Length: Up To 3,480mm
  • Drift Size Class (H x W): 2,500mm x 2,500mm
  • Tramming Dimensions: 9,590 x 2,670 x 2,750 mm
  • Weight 8,680kg
  • Boom/Mast Type: B14F
  • Carrier Type: Wheel-Mounted, Frame-Steering
  • Control System: IBCQF
  • Engine Type: Deutz L04D914, Diesel
  • Feed Module: TF500-12ft
    
    
• Location: North Western USA

View More Jumbo Drills

American Pulverizer 200 HP Vertical Shaft Paper Shredder ID: 335743

• Vertical Shaft Paper Shredder
• 200HP
• Infeed Conveyor
• Cart Dumper
• Dump and Run System
• Location: Eastern USA

View more Shredders

Kolman 101 Portable Screening Plant ID: 100992

• Self-Supported 10 Yard Feed Hopper.
  • 10’ X 10’ Sloped Grizzly.
  • ¾” X 3” Grizzly Bars With 1¼” Round Stock On Top (6” spacing).
  • 21” Wide Adjustable Discharge Gate.
• 24” Wide X 5’ Long Plate Feeder C/W 3/8” Wear Plate.
  • Chain Driven Off Conveyor Tail Pulley.
• 30” X 50’ Long Screen Feed Conveyor.
  • 24” Deep Covered Truss Frame.
  • 16” Plain Steel Head Pulley.
  • 15” Self Cleaning Tail Pulley.
  • 5” Dia. - 20° Idlers On 4.5’ Spacing.
  • 3 Ply Belting, 1/8” Top, 1/32” Back.
  • Chain Driven By a 20 HP Reliance Electric Motor 220/440 Volt.
• Kolman Model DC 90-54 - 2 Deck Wash Screen.
  • 4.5’ Wide X 9’ Long.
  • Belt Driven By a 7.5 hp motor.
  • Top Deck - 7/8” Cloth C/W 5 Spray Bars (With Flow Control Valve).
  • Bottom Deck - 1/4” Cloth C/W 4 Spray Bars (With Flow Control Valve).
  • Fully Enclosed Fines Unders Hopper With 2 – 10” Dia. Discharge Spouts.
  • 5’ Wide X 6’ Long Overs End discharge chute.
  • Overhead Extended Screen support.
• All On Single Axle Dual Wheel Chassis.
• 8.25 – 20 Tires.
• Manual Raise.

Caterpillar D5N LGP Crawler Tractor ID: 196128

• Dimensions:
  • Length w/ blade: 16.6 ft in (5060 mm).
  • Width over tracks: 9.1 ft in (2760 mm).
  • Height to top of cab: 10 ft in (3040 mm).
  • Length of track on ground: 8.5 ft in (2604 mm).
  • Ground clearance: 1.4 ft in (422 mm).
  • Length w/o blade: 12.2 ft in (3720 mm).
• Undercarriage
  • Track gauge: 6.6 ft in (2000 mm).
  • Standard shoe size: 29.9 in (760 mm).
• Specification:
  • Engine:
    • Make: Caterpillar.
    • Model: 3126BT.
    • Gross power: 115 hp (85.8 kw).
    • Power measured @ 2100 rpm.
    • Displacement: 439 cu in (7.2 l).
    • Number of cylinders: 6.
  • Operational:
    • Operating weight: 29217 lb (13252.6 kg).
    • Fuel capacity: 67.9 gal (257 l).
  • Transmission:
    • Type: Powershift
    • Number of forward gears: 3
    • Number of reverse gears: 3
    • Max speed - forward: 5.6 mph (9 km/h)
    • Max speed - reverse: 6.9 mph (11.1 km/h)
  • Undercarriage:
    • Ground pressure: 4.7 psi (32.4 kpa).
    • Ground contact area: 6135 in2 (4 m2).
    • Standard shoe size: 29.9 in (760 mm).
    • Number of track rollers per side: 8.
    • Track gauge: 6.6 ft in (2000 mm).
  • Standard blade:
    • Width: 11 ft in (3360 mm).
    • Height: 44.4 in (1127 mm).
    • Capacity: 2.7 yd3 (2 m3).
    • Cutting depth: 16.3 in (415 mm).
  • Dimensions:
    • Length w/o blade: 12.2 ft in (3720 mm).
    • Length w/ blade 16.6 ft in (5060 mm).
    • Width over tracks: 9.1 ft in (2760 mm).
    • Height to top of cab: 10 ft in  (3040 mm).
    • Length of track on ground: 8.5 ft in (2604 mm).
    • Ground clearance: 1.4 ft in (422 mm).

View more Dozers