Minpro 12in x 18in Duplex Mineral Jig ID: 1403915

Minpro 12in x 18in Duplex Mineral Jig

• Make: Minpro
• Model: 12in x 18in Duplex
• Year: 1988
• Condition: Used
• Size: 12in x 18in
• Feed Trough: 
  • Length: 56in
  • Width: 10in
• Hoppers: 
  • Length: 30in
  • Width: 19in
  • Height: 23in
  • Tapered to 1.5in
• Motor: 
  • Model: TEFC 3-Phase Induction Motor
  • Power Output: 3HP
  • Voltage: 230/460 Volts
• Overall Dimensions: 
  • Length: 68in
  • Width: 52in
  • Height: 82in

• Location: Western Canada

View More Mineral Jigs

Portable Powder Magazine ID: 1420885

Portable Powder Magazine

• Condition: Used Condition
• Trailer: Tandem Axle
• Trailer Capacity Rating: 10,000lbs
• Magazine Dimensions: 
  • Length: 10ft
  • Width: 5ft 
  • Height: 5ft
• Overall Dimensions:
  • Length: 14ft
  • Width: 7ft
  • Height: 7ft

• Location: Eastern Canada

View More Powder Mags

Bobcat 418 Mini Excavator ID: 768447

• Mfg: 2016
• Hours: 541
• 3 Cylinder Kubota Diesel Engine (Tier 4 Compliant)
  • Model: D722
  • 10.2 HP (7.6 kW)
• Front Blade 
• Digging Bucket 
• Maximum Digging Depth of 6 feet
• Maximum Reach of 10.2 feet
• Dump Height: 5 ft. 11 in. 
• Rated Lift Capacity of up to 527 lb.
• 7.2 in. Wide Rubber Tracks
  • Hydraulic Retractable 
    • Narrow Width of just 27.8 in. 
• TOPS: Tip Over Protection Structure 
• Auxiliary Hydraulics 
• Independent Boom and 360-Degree Rotation 
• Operating Weight is 2,593 lb.
• Location: British Columbia, Canada

View more Mini Excavators

ECODRIE 125-25 Piling Machine ID: 313521

• Type: ECODRIE 125-25
• Year: 1994
• Operational Weight: 60 tons
• Dimensions: 5.0 x 10.7 Meters
• Max Pile Diameter: 1000mm
• Max Pile Length: 23.50 meters
• Rotary Table: ECODRIE-Soilmec
• Max Torque: 15 ton-meters
• Main Winch: 15 tons on 4 Ropes eq 60 tons
• Secondary Service Winch: 3 ton 1 Rope
• Engine: DAF DKTD 1160 
• Hydraulic Pumps: 4 x VOAC F1-70
• Undercarriage: Hitachi
  • Modificated Travelmotors Torque
  • 100,000 NM Mounted
  • Slewing Swing Bearing 
• Tracks: Steel Plates 80mm
• Hydraulic System: Pilot Operated Valves for Main Fuctions
  • Mainwinch is Electrical Operated Danfoss
• Auxiliary: Auger Cleaner Woltman 600mm
  • Hydraulic Generator 3500 W
  • Hydraulic Waterpressure Cleaner
  • Hydraulic Lift on Pile-Boom for Vertical Transport
• Location: Europe

View more Rotary Drills

60 Pitch Sprocket ID: 155640

• 48 Teeth.
• Quantity: 2.

Please contact us for more information.

View more Conveyor Parts

350 Ton Per Hour Classifying Plant. 10 ft. x 40 ft. Greystone Portable Classifier with Twin 44 in. Screws. Powerscreen Commander 1400 Screen. 120 HP Fresh Water Pump. ID: 45579

350 Ton Per Hour Classifying Plant. 10 ft. x 40 ft. Greystone Portable Classifier with Twin 44 in. Screws. Powerscreen Commander 1400 Screen. 120 HP Fresh Water Pump.

7.5 HP Electric Motor ID: 698278

• HP: 75
• Voltage: 575 
• RPM: 1775
• Frame: 365T
• 3 Phase
• Location: Western Canada

View more Electric Motors

Square D 3 Pole 50 Amp Push-in Breaker ID: 163538

• 240 VAC
• 3 Phase
• Push-in
• Quantity 2

View More 50 Amp Breakers

Used Sag Mill. 20 ft. x 7 ft. Long. 800 HP. Steel Lined. Inching Drive. ID: 44511

Used Sag Mill. 20 ft. x 7 ft. Long. 800 HP. Steel Lined. Inching Drive.

Rex 225 kVA Transformer ID: 198581

• 225 kVA.
• Volts: 
  • Primary: 600V.
  •  Secondary: 208Y/120V.
•  3-Phase.
•  Type: Ann.
•  S/N: C 26028.

View more 225 kVA Transformers

Sew Eurodrive 2.84:1 Ratio Speed Reducer ID: 81115

• Parallel type.
• Serial # 72442.
• 4-1/4 in. and 3-7/16 in. shafts.

Square D Size 4 Combination Starter ID: 186766

• 600 VAC
• 100 HP
• Fused
• 300 VA 600/120 Control Transformer
• 120 VAC Control Coil
• NEMA 3R Enclosure
• Quantity 1

View More Size 4 Combination Starters

2016 Atlas Copco SmartROC T45 Drill ID: 1418571

2016 Atlas Copco SmartROC T45 Drill

• Make: Atlas Copco
• Model: SmartROC T45-11
• Year: 2016
• Type: Quarry and Construction Drill
• Hours: 10,771 Total Hours
  • Impact Hours: 4,252 Hours - Only 83 Percussion Hours since last Drifter Service/Reseal
  • Engine Hours: 10,771 Hours
• Condition: Used Condition
• Configured for T51 Tooling
• Drilling Method: Tophammer
• Rock Drill: Atlas Copco COP 2560
• Boom: Folding Boom
• Engine: CAT 9.3 Diesel Engine
• Compressor: Atlas Copco C146-07 - 472 CFM @ 174 PSI
  
  
• General Model Specifications:
  • Hole Range:
    • T45, T51: 89–127mm (3.5”– 5”)
    • Max Hole Depth: 29m (95ft) - Hydraulic Rod Handling System, with 3.6m (12’) Extension Rods and a 4.2m (14’) Starter Rod
  • Rock Drill: COP 2560
    • Impact Power: 25kW (33.5HP)
    • Hydraulic Pressure: 230 bar (3,335 PSI)
    • Impact Rate: 44Hz
    • Torque: 1,555Nm (1,147 lbf/ft)
  • Feed: T45 with Folding Boom
    • Feed Extension: 1,150mm (3’ 9’’)
    • Feed Rate, Max: 0.9 m/s (177 ft/min)
    • Feed Force, Max :20kN (4,496 lbf)
    • Tractive Pull, Max: 30kN (6,744 lbf)
    • Total Length: 7,700mm (25’ 3’’)
    • Travel Length: 4,610mm (15’ 2’’)
  • Compressor: Atlas Copco C146-07, Screw Type Compressor
    • Working Pressure, Max: 12 bar (174 PSI)
    • FAD, at Normal Working Pressure: 223 l/s (472 CFM)
  • Dust Collector: DCT 200
    • Filter Area: 20m² (215 sq.ft)
    • Number of Filter Elements: 20 pcs 
    • Suction Capacity at 500mm W.G: 540 l/s (1,144 CFM)
    • Suction Hose Diam: 127mm (5’’)
    • Cleaning Air Pressure, Max: 7.5 bar (109 PSI)
    • Cleaning Air Consumption: 2-4 l/pulse (0.06 - 0.12 cu.ft/pulse)
  • Carrier:
    • Tramming Speed: 3.4 km/h (2.1 mph)
    • Track Oscillation: ±10°
    • Ground Clearance: 405mm (16”)
  • Main Components:
    • Crawler Type Two-Speed Undercarriage with Track Oscillation System
    • Caterpillar Turbocharged Diesel Engine
    • Atlas Copco Screw Type Compressor
    • Dust Pre Separator
    • Combined Warning Sound and Warning Light
    • Folding Boom System
    • Automatic Cooler Fan Control
    • Air Flow Switch
    • Rock Drill Lubrication System
    • COP Logic
    • Toe-Hole Drilling System
    • Carousel Type Rod Handling System
    • Hydraulic Double Drill Steel Support with Movable Dust Collector Hood
    • Double Hose Drum
    • Dust Collection System
    • AutoPos
    • Automatic Rod Adding
    • Operator’s Cabin, ROPS and FOPS Approved
      
      
• Location: USA

View More Quarry Drills

CAT 4.3 MW Generator Sub-Station Package ID: 536541

Generator and Substation Package:

CAT Model 3616 Diesel Engine

• Year: 2011
• Hours: 630
• Displacement: 296 L
• Valve Lash: 0.6 mm
• Valve Lach 1.0 mm
• Max Rated Speed (RPM): 1000
• Bore 280 mm
• Stroke 300 mm
• 16 Cylinders 4-Stroke Turbocharged After Cooled
• Exhaust and Silencer System
• Smithco Radiator
• Air Filters

KATO Synchronous AC Generator

• 4272 KW
• 5340 KVA
• 2402/4160 Volt
• 3 Phase
• 60 Hz.
• 900 RPM
• 741 Amp
• 8 P.F.

Also Available:

GE Prolec Load-Tap Changing Transformer

• Serial No. G2704-01
• Voltage Rating: 69000 – 4160 Y/2400
• 3 Phase
• 60 Hz.
• Altitude Rating: 2300 meters
• KVA Rating
  • 12,000 Continuous @ 55 C Rise ONAN
  • 13,400 Continuous @ 65 C Rise ONAN
  • 16,000 Continuous @ 55 C Rise ONAF
  • 17,900 Continuous @ 65 C Rise ONAF
• Impedance @ 75 C
  • %Z – 7.020
  • KVA Base – 12,000
  • kV Base – 69 – 4.16

Control Panels

• Substation Control Room
• IE – Intermountain Electronics Inc. MV Switchgear
• Input: 3000A @ 4.16KV
• Output 1: 3000A @ 4.16KV
• MFG Date: June 2012

Kaeser Air Compressor with 2000 Liter Tank

Additional Equipment:

• Substation Structures
• Tensioners
• Connectors
• Grounding disconnector system
• Lightening grounding system
• Bar insulators
• Voltage transformers
• Interlock Coils Box
• Marshaling Box Switch Panel
• High Voltage Insulators
• Electrical Panel and Transformer for Lighting Brand: GENERAL PACIFIC, 15KVA, 60HZ, 3 Phase, No. 219118-03

Location: Central America

View more Diesel Generators

Westinghouse 200 Amp Disconnect ID: 192629

• Cat.: RHF-424N.
• Volts: 240V.
• Std HP: 25.
• Max HP: 50.
• Single Throw Fusible.
• Includes
  • (3) Shawmut Gould 150 Amp Fuses. 

View more 200 Amp Disconnects 

Hardinge SAG Mill 6.4m Dia x 3.35m EGL (21 ft. x 11 ft.) ID: 540493

• Hardinge SAG Mill 6.4m Dia x 3.35m EGL (21 ft. x 11 ft.)
• 2875 HP Motor
• Complete With:
  • Liner Handler
  • Jib Crane
  • Drum Handler
  • Vent Ducting
  • Motor Fan
  • Air Cooled Oil Cooler
  • Motor Vent Filter
  • Oil Heater
  • Ball Charger
  • Complete Lubrication System
  • Complete Control System
  • Inching Drive
• Located in Central America.

Available separately or as part of a complete 5000 TPD Gold and Silver Plant

View more SAG Mills

Eimco 4 ft. x 20 ft. Belt Filter ID: 83853

• Please inquire for additional information.

John Deere 410J Backhoe ID: 515133

• Model: 410J
• Year: 2011
• 4x4
• Front Hydraulic Quick Copler with 
  • Standard  Bucket
• Rear Manual Copler with 
  • Hyd/Aux
• Teeth Bucket
• Location: Eastern Canada

View more Backhoes

ASCO 1000A, 480V Auto Transfer Switch ID: 1379718

ASCO 1000A, 480V Auto Transfer Switch

Quantity: 2 Units Available

• Make: ASCO
• Category: 3ATS
• Model: H03ATSA31000NG0C
• Type: Automatic Transfer Switch
• DOM: 02/2016
• Condition: Used, Reported in "Like-New" Condition
• Pole: 3 Pole
• Current: 1000 Amp
• Voltage: 480Y/277 Volt
• Frequency: 60Hz
• Phase: 3-Phase
• Emerson Control Panel
  
  
• Location: Western Canada

View More Transfer Switches

Ansul Fire Extinguisher ID: 237046

• Model: LT-1-A-20-G-1
• Available: 25
• Location: Western Canada

View more Saftey Equipment

ITT General Hydramotor Gas Valve ID: 1066685

Type: AH8B112A4

120V 60Hz

ACTR Oil: 156202H

Opening Time: 7-14 Seconds

Max Closing Time: 1 Second

Aux Switch: 120V 15A

                  240V 7.5A

Valve Seal Overtravel Interlock Switch: 15A @120V

                                                        7.5A @240V

Operating Temp: -40° to 150°F

Stem Force: 200lbs @75°F

Nema 1 General Purpose Enclosure

Cutler Hammer Size 0 Combination Starter ID: 190314

• 120 - 600 VAC
• Single Phase or 3 Phase
• 18 Amp @ 600 VAC
• 5 HP @ 480/600 VAC 3 Phase
• 3 HP @ 230 VAC 3 Phase
• 2 HP @ 240 VAC Single Phase
• 1 HP @ 120 VAC Single Phase
• Auto/Start/Stop Buttons
• NEMA 1 Enclosure
• Quanitty 1

View More Size 0 Combination Starters

Sandvik MT520 Roadheader ID: 1336758

Sandvik MT520 Roadheader

• Make: Sandvik
• Model: MT520
• Type: Roadheader
• Serial: 023 
• Condition: Used, Reported In Good Condition
• Year: 2016
• Hours: 
  • Hydraulic Motor: 5,542 Hours
  • Cutting Head Motor: 3,756 Hours
    
    
• Description: The Sandvik Roadheaders are Electro-Hydraulically Powered and equipped with powerful, geometrically optimized, inline or transverse cutter heads proven to give the best cutting performance in a wide range of rock conditions. Subway tunnels, road tunnels, shaft sinking, rehabilitation of existing tunnels and excavation of underground caverns are just a few examples where these machines have demonstrated their great flexibility. Our Sandvik MT520 PLC-controlled Roadheader has been designed for use in tunneling, as well as salt, potash and chalk mining with a maximum profile up to 70m². It has a modular design that offers more flexibility than standard Roadheaders and works in most rock conditions up to 100 MPa compressive strength.
  
  
• General Model Specifications:
  • Total Weight (+/-5): 120 Tons
  • Machine Ground Pressure: 0.22 MPa
  • Overall Length: ~ 20m
  • Height: 5.1m
  • Loading Table Width: 4.56m
  • Cutter Boom Telescope: 1200mm
  • Cutting Height, Max: 7.1m
  • Cutting Width, Max: 10.3m
  • Undercut - Extended Telescope: 750mm
  • Cutter - Retracted Telescope: 115mm
  • Cutting Speed, 50 Hz: 1.5m/sec
  • Cutter Head Speed: 2.68m/sec
  • Navigable Gradient, Incline/Decline: ±18°
  • Capacity of Conveyor, Max: 350m³/h
  • Electric Supply Voltage: 1000/1140 Volts
  • Cutter Motor: 315kW
  • Tramming Speed: 0-20m/min
  • Total Installed Power: 537kW
    
    
• Overall Dimensions:
  • Length: 20m
  • Width: 4.56m
  • Height: 5.1m
  • Weight: 120,000 Kgs
    
    
• Location: Western Canada

View More Roadheaders

Polymer Systems Granulator ID: 256480

• Model: 1526A
• 50 HP 
• 480 Volt
• 3 Phase
• 15” x 26” Throat
• 3Knives
• 2 Bed Knives
• Loading Hopper
• 2,500 lbs. per hour
• Extra Stand to Elevate 60”
• Feed Conveyor: 16" wide & 18/ft long
• Dumper
• Location: Eastern USA

View more Granulators

High Volume Fire Hose ID: 1199276

High Volume Fire Hose

Quantity: 6 Hoses

• Hose Length: 100 ft.
• Hose Inside Dia.: 4 in
• 4in Angus Quick Coupler Ends
• Max. Working Pressure @ 70°F: 250 PSI
• Burst Pressure: 750 PSI
• Fire Hose Type: Single Jacket
• Hose Reinforcement Type: Woven
• Hose Reinforcement Material: Polyester
• Jacket Material: Rubber
• Hose Cover Material: Rubber
• Hose Tube Material: PVC Nitrile
• Temp. Range: -36°F to +158°F
• Hose Colour: Red
• Compatible Chemicals: Air, Fresh Water, Salt Water
• Standards: NFPA 1961 Standard, ULC Listed
  
  
• Location: Savona, British Columbia, Canada

View More Hose

1974 Telsmith 48FC Cone Crusher ID: 1423164

1974 Telsmith 48FC Cone Crusher 

• Make: Telsmith
• Model: 48FC
• Type: Cone Crusher Mounted on Wheeled Chassis
• Style: Fine Crushing Gyrasphere
• Year: 1974
• Condition: Used, Reported in Perfect Working Condition
  • Complete Rebuild 300 Hours Ago
• Liner: Medium - Good Shape
  • Includes an Additional New Coarse Liner
• Drive: 200HP Electric Motor
  • Voltage: 480 Volt
• Lubrication System Included
• Under Crusher Conveyor: 30in Wide x 12ft Long
  • Drive: 5HP, 480 Volt Electric Motor
    
    
• General Model Specifications:
  • Feed Opening:
    • Open Side: 3in
    • Closed Side: 1.875in
  • Recommended Minimum Discharge Opening: 0.3125in (5/16")
  • Capacity: 180 TPH @ 0.875in (7/8") Discharge (55 TPH @ 0.25in (1/4") Discharge)
    
    
• Location: Northeast USA

View More Cone Crushers

Leeson Wattsaver 5 HP Motor ID: 174738

• 184T Frame
• 50/60 Hz
• TEFC
• @ 50 Hz
  • 190/380 VAC
  • 1445 RPM
  • 7.7/15.4 Amps
  • 1.15 S.F.
• @ 60 Hz
  • 208-230/460 VAC
  • 1760 RPM
  • 6.4/13.8 Amps
  • 1.15 S.F.
• Quantity 4

View More 5 HP Motors

3 Deck Gravel Processing Plant ID: 205974

• Gravel processing plant.
• Located in Germany. 
• Climbing conveyor:
  • AA 82 ft/31 in. (+ extension 32 ft - without rubber).
• Deck Screens:
  • One 13 ft.  x 5 ft. with washing.
  • One 16 ft.  x 5 ft. with washing.
• Conveyor belts:
  • 2 conveyor belts on wheels AA 46 ft/20 in.
  • 1 conveyor belt on wheels AA 33 ft./20 in.
  • 2 conveyor belts on wheels AA 66 ft./26 in.
• Sword Wash:
  • Year: 2007.
  • 11.5 ft. long.
  • 31 in. diameter.
• Bucket Wheel:
  • Make Liebchen.
  • Type SLZ 60.
  • Year of construction 1995.

View more Wash Plants

24 in x 36 ft Channel Conveyor ID: 152369

• 24 in. x 36 ft. Channel Conveyor.
  • 3 available.
    • Length:
      • Center of head pulley to center of tail pulley.
        • 36 ft.
    • Troughing idlers:
      • 20°, 4 in. diameter.
      • Idler spacing:
        • 42 in.
          • 20 in. spacing near tail.
    • Head pulley:
      • 10 in. rubberized.
    • Tail pulley:
      • 8 in. self-cleaning.
    • Shaft mount reducer:
      • Dodge hydraulic R25.
        • 2517 bushing.
    • Motor:
      • Hydraulic.
    • Belting:
      • 2 ply.
        • 2 units smooth.
        • 1 unit textured.

Please contact us for more information.

More Equipment Deals

Westinghouse 3 Pole 60 Amp Bolt-on Breaker ID: 163531

• 240 VAC
• 3 Phase
• Bolt-on
• Type HACR
• Quantity 2

View More 60 Amp Breakers

Cummins Diesel Generator ID: 117828

• Cummins Diesel Generator.
  • Cummins VT12-635-GS.
  • Hours: 2,017.
  • Generator is in fair condition.
    • Dimensions (L x W x H):
      • 136 in. x 89 in. x 55 in.
    • Skid dimensions (L x W):
      • 112 in. x 30 in.

Please contact us for more information,

Alfa Laval MAB 103 OCM-C 103 Separator ID: 1377180

Alfa Laval MAB 103 OCM-C 103 Separator

• Make: Alfa Laval
• Model: MAB OCM-C 103
• Separator: MAB 103 B-24
• Year: 2010
• Application: Continuous Cleaning of Heavy Fuel Oil or Lubricating Oil from Solid Particles
• Hydraulic Capacity: Maximum 1.4 m³/h
• Max Density of Feed: 1100 kg/m³
• Max Density of Sediment: 5,000 kg/m³
• Bowl Speed: 8,570-8,600 RPM
• Motor: 0.75kW
• Motor Shaft Speed: 1500 RPM
• Heater: 14kW
• Voltage: 415 Volt
• Frequency: 50Hz
• Comes with Tools
  
  
• Location: Europe

View More Centrifuges

Patterson 30 in. x 42 in. Batch Mills ID: 79208

• Inside diameter: 27.5 in. 39.5 in.
• Ceramic lined.
• Ceramic ball charge, 1.5 in. dia. minus.
• Babbit bearings.
• One mill with 3/4 in. grid door discharge.
• One mill with closed door.
• Pedestals included. 

Used Secan Stopers 250's ID: 45157

Used Secan Stopers 250's

Case 580N Backhoe ID: 177799

• Year: 2011.
• Hours: 1850.
• Fuel type: diesel.
• Heat and air conditioned cab.
• Four wheel drive.
• Includes:
  • Extend-a-hoe.

Please contact us for more information.

View more Backhoes