Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Blackmer NP1 1/2 Centrifugal Lube Pump ID: 90975
- 1.5 inch inlet.
- 1.5 inch outlet.
- Baldor 1.5 HP electric motor.
- 575 volt, 1725 rpm.
- 145T frame.
- Pump driven through Falk inline gear reducer.
- 17.5-1 ratio.
38kW Doosan G50 Rental-Grade Portable Diesel Generator ID: 1420097
38kW Doosan G50 Rental-Grade Portable Diesel Generator
- Make: Doosan
- Model: G50WDO-3A-T4F
- Year: 2019
- Hours: 3,273.7 Hours
- Condition: Used, Reported in Like New Condition
- Rental Grade
- Duty: Prime
- Fuel: Diesel - No DEF
- Portable/Stationary: Portable, Mounted on Trailer
- Trailer: Single Axle
- Enclosure: Sound Attenuated Enclosure
- Auto Start or Manual Start
- Multi-Voltage Selector Switch: 3-Phase or Single Phase
- Engine:
- Model: Doosan D24
- Power Output: 59.8HP (44.6kW)
- Number of Cylinders: 4
- Displacement: 2.392L
- Generator:
- kVA/kW: 38kW (48kVA)
- Voltage: Multi Selector Switch
- 480 Volts, 3-Phase
- 208/240 Volts, 3-Phase
- 240/120 Volts, Single Phase
- Current:
- 408 Volts: 64 Amps
- 208/240 Volts: 139 Amps
- 240/120 Volts: 130 Amps
- Frequency: 60Hz
- Phase: 3-Phase or Single Phase
- Overall Dimensions:
- Length: 130.5in (3,315mm)
- Width: 72.8in (1,850mm)
- Height: 78.4in (1,992mm)
- Location: Southeast USA
View Spec Sheet Below
View More 26-50kW Diesel Generators
Cutler Hammer 3 Pole 50 Amp Push-in Breaker ID: 166322
- 120-240 VAC
- 3 Pole
- Type: BR350
- Push-in
- Quantity 1
View More 50 Amp Breakers
Manufacturer: | CUTLER HAMMER |
General Electric Cabinet For Induction Generator ID: 122493
- General Electric Cabinet, Contol and Converter.
- For double fed induction generator in wind generation application.
- Manufactured in 2014.
- Water cooled.
- Connection: Grid.
- Voltage (3 phase):
- Grid: 690 VAC.
- Gen stator: 690 VAC.
- Gen rotor: 690 VAC.
- Frequency:
- Grid: 50/60 Hz.
- Gen stator: 50/60 Hz.
- Gen rotor: 50/60 Hz.
- Current (A RMS):
- Grid: 1720 @ 35°C / 1500 @ 45°C.
- Gen stator: 1425 @ 35°C / 1425 @ 45°C.
- Gen rotor: 640 @ 35°C / 640 @ 45°C.
- Max symm. short circuit current :
- 32 kA RMS, 690 VAC (Main XMFR connection).
Please contact us for more information.
Manufacturer: | GENERAL ELECTRIC |
Boyles Bros. X-Ray Diamond Core Drill ID: 1415440
Boyles Bros. X-Ray Diamond Core Drill
Quantity: 2 Drills Available
- Make: Boyles Bros.
- Model: X-Ray
- Type: Diamond Core Drill
- Condition: Used Condition - Drill Heads are Complete and in Good Shape, as are the Frames
- Drives: (3) Briggs-Stratton 9HP Engines
- One Engine is for Parts
- General Specifications:
- Depth Rating:
- RW: 250ft (76m)
- EW: 150ft (46m)
- AW: 100ft (30m)
- BW: 75ft (23m)
- "X-RAY" Swivelheads:
- Gear-Feed:
- I.D. Feedscrew: 1-1/8in (28.6mm)
- Feed Travel: 16in
- Chuck RPM:
- Standard 1:1 Bevel Gear: 720 to 1440 RPM
- Low Speed 2:1 Bevel Gear: 360 to 720 RPM
- Length: 32in (813mm)
- Weight: 39 Lbs. (17.7kg)
- Feed Gears:
- Standard: 300 RPM and 550 RPM
- Optional: 75, 200, 400, 675, 800 and 900 RPM
- Hand-Feed:
- I.D. Feedscrew: 1-1/8in (28.6mm)
- Feed Travel: 10in (254mm)
- Chuck RPM:
- Standard 1:1 Bevel Gear: 720 to 1440 RPM
- Low Speed 2: 1 Bevel Gear: 360 to 720 RPM
- Length: 39in (990mm)
- Weight: 68 Lbs. (31kg)
- Gear-Feed:
- Depth Rating:
- Location: Eastern Canada
View More Diamond Core Drills