Positive Displacement Pump. Model: C6DB-137. ID: 44183

• IMO Three Screw Pump
• Series 6
• Model: C6DB-137.
• Output Pressure:
  • 1500 PSI
  • 103 BAR
• Capacity Range:
  • 7 - 28 GPM
•  Speed Range:
  • 1150 - 3500 RPM
• 2 Units Available
• Location: BC Canada.

Wemco 190 Flotation Mechanisms ID: 83479

• 1500 Cu Ft Cells.
• Guarding included.
• Spare shaft & bridge assembly.
• 2 units available.

Midwest 4CT18 ID: 1075444

Type: 4CT18

800:5

Current Transformer

2VA

Cycles: 25-400

11.5 Cubic meter Membrane Filter Press for Sale ID: 51213

• 11.5 cubic meter membrane filter press.
• New and unused. 
• 110 plates made with 100 percent virgin polypropylene.
• Dual feed and dual cylinder.
• Max feed pressure of 300 PSI.
• Unit can cycle up to four times per hour.
• Mine duty construction.
• Auto plate shifting and core blow.
• 4 corner filtrate collection and side tapped with stainless filtrate collection troughs.

Universal 16ft. Chain Bucket Elevator ID: 402853

• Model: U1
• Dodge Shaft Mounted Reducer
  • Class I Operation
• 3 Phase
• 60 Hz
• 230/460 Volt
• TEFC
• Premium Efficiency
• Spout Hopper
  • Narrow Inlet
• 6in. x 4in. 18 Gauge Steel Buckets
• Location: Eastern USA

View more Bucket Elevators

15ft³ Pug Mixer ID: 1234161

15 Cubic Foot Pug Mixer

• Make: Crossman Machinery Company
• Type: Pug Mill
• Size: 2ft x 2ft x 5ft Wide Open Top Mixer
• Heavy Duty Mixer Shaft and Paddles
• Chain Driven through a Right Angle Reducer and Electric Motor
• Mounted 3.5ft High Legs
• With Manual Slide Discharge Gate
  
  
• Location: Savona, British Columbia, Canada

View More Various Cement Equipment

Montabert H-70 Hydraulic Drifter Drill ID: 705339

• Shank: 7/8 in. x 108 mm
• Weight: 40 kg 
• Length: 585 mm 
• Profile Height from Rod Center: 56 mm 
• Rotation Rate: 0- 350 RPM Independent, Reversible Rotation 
• Impact Rate: 80 Hz @ 150 Bar 
• Rotation Torque: 90 Nm @ 120 Bar 
• Hydraulic Requirements 
  • Percussion Pressure: 120 - 150 Bar
  • Oil Flow: 60 - 70 L/Min @ 120 - 150 Bar
  •  Viscosity: Range: 60 - 30 CST 
  • Air Flushing:
    • Air Consumption: 600 - 950 L/Min @3/5 Bar
    • Relief Valve Set: 7 Bar
    • Shank Lubrication: Standard 
  • Water Flushing:
    • Water Consumption: 5 - 10 L/min 
    • Water Pressure: 2 - 6 Bar 
    • Air Consumption: 200 - 300 L/Min @ 3-5 Bar 
  • Flushing Pipe Diameter: 5 mm
• Location: British Columbia, Canada

View more Drifter Drills

JLG 1255 Zoom Boom ID: 1005749

• Model: 1255
• Hours: 3662
• Year: 2015
• Fuel Type: Diesel 
• Cab: Heat & AC
• Carriage Width: 72 in.
• Forks: 72 in. Pallet
• Tires: Foam Filled 
• Location: Eastern USA

View more Zoom Booms

Caterpillar 416C Loader Backhoe ID: 123315

• Caterpillar 416C Loader Backhoe.
  • Year: 1997.
  • Hours: 11693.
  • Comes with:
    • Extendahoe.
    • 24 in. digging bucket.
    • Clean up bucket.
  • Also available.
    • Ditching bucket.
    • Frost bucket.

Please contact us for more information.

2016 Sandvik LH204 Scooptram ID: 1424352

2016 Sandvik LH204 Scooptram

• Make: Sandvik
• Model: LH204
• Year: 2016
• Hours: 3,644 Hours
• Condition: Used, Reported in Good Condition
• Canopy: ROPS/FOPS

• General Model Specifications: 
  • Capacities:
    • Tramming Capacity: 4,000kg (8,820lbs)
    • Tipping Load: 10,350kg (22,800lbs)
    • Standard Bucket: 2.0m³ (2.6yd³)
  • Engine: Deutz BF4M2012C Diesel Engine
    • Power Output: 95kW (125HP) @2,500RPM
    • Torque: 445Nm @1,500RPM
    • Cylinders: 4, Inline
    • Displacement: 4.04L (247in³)
  • Bucket Motion Times: 
    • Raising Time: 4.8 Seconds
    • Lowering Time: 3.4 Seconds
    • Dumping Time: 3.9 Seconds
  • Turning Radius: 
    • Turning Angle: 42°
    • Inner: 2,886mm (114in)
    • Outer: 5,153mm (203in)
  • Overall Dimensions: 
    • Length: 7,766mm (306in)
    • Width: 1,600mm (63in)
    • Height with Canopy: 2,127mm (84in)
    • Weight: 13,950kg

• Can have Ejector Bucket Installed for Additional Cost

• Location: Western Canada

View More Scooptrams

Volvo 417 kW 400 Volt Diesel Generator ID: 1053308

• Voltage: 400 Volt 
• Hours: 614
• Volvo Engine 
  • Model: TAD1631GE 
• Marelli Alternator 
• 1500 RPM 
• 50 Hz 
• Skid Mounted 
• Radiator Cooled 
• Electronic Governor 
• Base Fuel Tank 
• Water Jacket Heater 
• Free Standing Auto Start Control Panel 
• Location: Europe 

View more Generators

Asian Test Equipment TRS-DN Hardness Tester ID: 1416152

Asian Test Equipment TRS-DN Hardness Tester

• Make: Asian Test Equipment
• Model: TRS-DN
• Type: Rockwell Hardness Tester
• Year: 2021
• Condition: Used, Reported in Good Condition
• Test Loads (kgf): 60, 100, 150 (Rockwell)
• Initial Loads (kgf): 10
• Max Test Height: 290mm
• Depth of Throat: 133mm
• Load Control: Automatic (Loading, Dwell, Unloading)
• Dwell Time: 1-99 (Selectable)
  
  
• Overall Dimensions: (Approx.)
  • Length: 610mm 
  • Width: 173mm
  • Height: 705mm
  • Weight: 100kg
    
    
• Location: Western Canada

View More Laboratory Equipment

Baldor 60 HP Super-E Motor ID: 158069

• 230/460V.
  • 3 phase.
  • 60 Hz.
• 1780 rpm.
• 138/69A.
• Frame: 364T.
• Enclosure: TEFC.

Please contact us for more information.

View more 60 HP Motors