Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
General Electric 600 HP Electric Motor ID: 877580
- Voltage: 2300 Volt
- Horse Power: 600
- RPM: 1800
- Frame: 588US
- Location: Eastern Canada
View more Electric Motors
Siemens 200 Amp Disconnect ID: 1414909
Siemens 200 Amp Disconnect
- Make: Siemens
- Model: ID364NF
- Type: Disconnect
- Style: Non-Fusible
- Current Rating: 200 Amp
- Voltage Rating: 600 Volt
- Poles: 3-Pole
- Enclosure: NEMA 1
- Location: Savona, British Columbia, Canaday esta
View More 200 Amp Disconnects
Bonfiglioli Speed Reducer Package ID: 147271
- Speed Reducer Package.
- Consists of:
- Bonfiglioli Speed Reducer.
- Model: VF185.
- Ratio: 200:1.
- Marathon 1 hp electric motor.
- 230/460V.
- 1,200 rpm.
- 3 phase.
- 60 Hz.
- Inverter duty.
- Bonfiglioli Speed Reducer.
- Gearbox and motor never used since purchased NEW in 2009.
- Consists of:
Please contact us for more information.
Aurora 411 BF Horizontal Split Case Pump ID: 145765
- Type: 411 BF.
- 5" X 6" X 17" Impeller.
- 1200 GPM.
- 192 ft/head.
- Equipped with:
- 100 hp electric motor.
- 230/460V.
- 1,800 rpm.
- Frame: 404T.
- Continuous duty.
- 100 hp electric motor.
- 4 units available.
Please contact us for more information.
Square D 60 Amp Non-Fusible Disconnect ID: 1075144
Square D 60 Amp Non-Fusible Disconnect
- Make: Square D
- Type: Non-Fusible
- Current: 60 Amp
- Voltage: 600 Volt
- NEMA 3R Enclosure
- Comes with Start/Stop Button in Door
- Location: Savona, British Columbia, Canada
View more Disconnects
AMP-TRAP AJT40 ID: 992301
Amp-trap
ajt
40amp
time delay
General Electric 40 HP Motor ID: 155381
- 460V.
- 3,565 rpm.
- 3 phase.
- Frame: 324TS.
Please contact us for more information.
View more 40 HP Motors
. Ingersoll-Rand 1-P86 Pavement Breaker ID: 41839
- Ingersoll-Rand Pavement Breaker.
- Model 1-P86.
- 1-1/8 in. Chuck.
Telsmith 2540 Jaw Crusher ID: 1200492
Telsmith 2540 Jaw Crusher
- Make: Telsmith
- Model: 2540 Pegson
- Year: 2009
- Condition: Operational, Repowered
- Toggle: Single
- Frame Style: Single Piece
- Max Feed Size: 22in
- Min/Max Discharge:
- Min: 2.5in
- Max: 7in
- Max Capacity: Up To 217 Discharge (Up To 444 TPH@7in Discharge, Short Toggle)
- Drive: 150HP Motor Included
- Overall Dimensions:
- Length: 107in
- Width: 90.75in
- Height: 89in
- Weight: 35,515 Lbs.
- Additional Information:
- Jaw has been Repowered
- Jaw has been Repowered
- Location: South America
View More Jaw Crushers
Perrin 30 in. x 30 in. Plate Filter ID: 70332
- 11 - Lenser plate elements.
- 10 - Lenser frame elements.
- 2" Thick.
- Approx. 6.6 cubic feet of cake volume.
- Quincy series TH3 - 6 X 20 Hydraulic closing cylinder.
- Air over hydraulic manual controls.
General Electric 600 Amp Breakers ID: 160008
- 600 Amp frame.
- Adjustable trip.
- Quantity: 3.
Please contact us for more information.
View more 600 Amp Breakers
Manufacturer: | GENERAL ELECTRIC |
2008 Stamford 300 kW Gen Ends ID: 223799
- Frame/Core: HCI434E1L-0080E.
- KVA Base Rate: 375.
- kW Base Rate: 300.
- Hz: 60.
- RPM: 1800.
- Volts: 480.
- Ph: 3.
- Amps Base Rate: 451.
- PF: 0.8.
- Rating: Continuous.
- Volts: 40.
- Ex Amps: 2.00.
- Ambient Temp C: 40.
- Enclosure: IP22.
- Insulation Class: H:UL1446.
- Quantity: 4.
- Location: Central U.S.A.
View more 300 kW Generators
Manufacturer: | Stamford |
Caterpillar 14M Motor Grader ID: 196879
- Engine:
- Make Caterpillar.
- Model C11 ACERT VHP.
- Net Power Gear 1-2 259 hp/193 kw.
- Net Power Gear 3-4 274 hp/204 kw.
- Power Measured @: 1800 rpm.
- Net Power Gear 5-6: 274 hp/204 kw.
- Number of Cylinders: 6.
- Net Power Gears 7-8: 274 hp/204.3 kw.
- Max Power: 274 hp/204.3 kw.
- Displacement: 677 cu in/11.1 L.
- Operational:
- Front Axle Std Operation Weight: 12611 lb/5720 kg.
- Rear Axle Std Operation Weight: 34522 lb/15659 kg.
- Total Std Operation Weight: 47133 lb/21379 kg.
- Front Axle Max Operation Weight: 21912 lb/9939 kg.
- Rear Axle Max Operation Weight: 44086 lb/19997 kg.
- Total Max Operation Weight: 65998 lb 29936 kg.
- Fuel Capacity: 130 gal/492 L.
- Cooling System Fluid Capacity: 12.3 gal/46.5 L.
- Hydrauilc System Fluid Capacity: 15.9 gal/60 L.
- Transmission Fluid Capacity: 23.5 gal/89 L.
- Circle Gearbox Fluid Capacity: 1.6 gal/6 L.
- Tandem Case Fluid Capacity (each): 25.5 gal/96.5 L.
- Transmission:
- Type: direct drive, power shift, countershaft.
- Number of Forward Gears: 8.
- Number of Reverse Gears: 6.
- Max Forward Speed: 31 mph/49.8 km/h.
- Max Reverse Speed: 24.5 mph/39.4 km/h.
- Steering:
- Articulation L/R: 20 degrees.
- Turning Radius: 25.9 ft in/7.9 m.
- Front Axle:
- Wheel Lean: 17.1 degrees.
- Oscillation: Total 32 degrees.
- Hydraulic System:
- Pump Type: variable displacement.
- Pump Flow: 74 gal/min;280 L/min.
- Relief Valve Pressure: 3500 psi/24150 kPa.
- Moldboard:
- Moldboard Width: 14 ft in/4267 mm.
- Moldboard Height: 27 in/688 mm.
- Moldboard Thickness: 1 in/25 mm.
- Max Depth of Cut: 17.3 in/438 mm.
- Left Side Shift: 29.1 in/740 mm.
- Right Side Shift: 31.1 in/790 mm.
- Blade Pull at Max Weight: 39678 lb/17997 kg.
- Blade Down Pressure: 38666.9 lb/17539 kg.
- Circle:
- Diameter: 71.8 in/1822 mm.
- Shift Left: 25.5 in/650 mm.
- Shift Right: 20.5 in/520 mm.
- Max Reach Outside Tires: Left 85.4 in/2169 mm.
- Max Reach Outside Tires: Right 89.7 in/2279 mm.
- Max Lift Above Ground: 16.5 in/419 mm.
- Front Blade Tip Angle: 40 degrees.
- Reart Blade Tip Angle: 5 degrees.
- Dimensions:
- Height to Top of Cab: 11.6 ft in/3535 mm.
- Overall Length: 30.9 ft in/9412 mm.
- Width Over Tires: 9.2 ft in/2791 mm.
- Wheelbase: 21.5 ft in/6559 mm.
- Blade Base: 9.3 ft in/2842 mm.
- Tandem Axle Wheelbase: 5.4 ft in/1656 mm.
- Rear Ground Clearance: 1.3 ft in/383 mm.
- 7 shank ripper blade.
- 4 shanks fitted.
- Full ROPS cab.
- Hours: 9700.
View more Graders
Manufacturer: | CATERPILLAR |
Atlas Copco COP 1838ME Drifter Drill ID: 351902
- Dimensions and Weight
- Weight: 170 kg
- Length without Shank Adapter: 1008mm
- Width Including Connectors: 251mm
- Height: 223mm
- Height over Drill Center: 88mm
- Rotation Motors
- Type: 05 0MS100/07 0MS160
- Rotation Range: 0-340/215 RPM
- Torque: 640/1000 Max Bar
- Working Pressure: 210 Max Bar
- Oil Consumption: 75 l/min
- Impact Ratings
- Impact Power: 18 kW Max
- Input Power to Rock Drill: 31 kW Max
- Hydraulic Pressure: 230 kW Max
- Flow Rate: 75-92 l/min
- Impact Frequency: 60 Hz
- Impact Energy: 330 Nm
- Rebuilt
- 2 Units Available
- Location: South Korea
View more Drifter Drills