Equipment Quotes
Minpro 12in x 18in Duplex Mineral Jig ID: 1403915
Minpro 12in x 18in Duplex Mineral Jig
- Make: Minpro
- Model: 12in x 18in Duplex
- Year: 1988
- Condition: Used
- Size: 12in x 18in
- Feed Trough:
- Length: 56in
- Width: 10in
- Hoppers:
- Length: 30in
- Width: 19in
- Height: 23in
- Tapered to 1.5in
- Motor:
- Model: TEFC 3-Phase Induction Motor
- Power Output: 3HP
- Voltage: 230/460 Volts
- Overall Dimensions:
- Length: 68in
- Width: 52in
- Height: 82in
- Location: Western Canada
View More Mineral Jigs
Portable Powder Magazine ID: 1420885
Portable Powder Magazine
- Condition: Used Condition
- Trailer: Tandem Axle
- Trailer Capacity Rating: 10,000lbs
- Magazine Dimensions:
- Length: 10ft
- Width: 5ft
- Height: 5ft
- Overall Dimensions:
- Length: 14ft
- Width: 7ft
- Height: 7ft
- Location: Eastern Canada
View More Powder Mags
Bobcat 418 Mini Excavator ID: 768447
- Mfg: 2016
- Hours: 541
- 3 Cylinder Kubota Diesel Engine (Tier 4 Compliant)
- Model: D722
- 10.2 HP (7.6 kW)
- Front Blade
- Digging Bucket
- Maximum Digging Depth of 6 feet
- Maximum Reach of 10.2 feet
- Dump Height: 5 ft. 11 in.
- Rated Lift Capacity of up to 527 lb.
- 7.2 in. Wide Rubber Tracks
- Hydraulic Retractable
- Narrow Width of just 27.8 in.
- Hydraulic Retractable
- TOPS: Tip Over Protection Structure
- Auxiliary Hydraulics
- Independent Boom and 360-Degree Rotation
- Operating Weight is 2,593 lb.
- Location: British Columbia, Canada
View more Mini Excavators
ECODRIE 125-25 Piling Machine ID: 313521
- Type: ECODRIE 125-25
- Year: 1994
- Operational Weight: 60 tons
- Dimensions: 5.0 x 10.7 Meters
- Max Pile Diameter: 1000mm
- Max Pile Length: 23.50 meters
- Rotary Table: ECODRIE-Soilmec
- Max Torque: 15 ton-meters
- Main Winch: 15 tons on 4 Ropes eq 60 tons
- Secondary Service Winch: 3 ton 1 Rope
- Engine: DAF DKTD 1160
- Hydraulic Pumps: 4 x VOAC F1-70
- Undercarriage: Hitachi
- Modificated Travelmotors Torque
- 100,000 NM Mounted
- Slewing Swing Bearing
- Tracks: Steel Plates 80mm
- Hydraulic System: Pilot Operated Valves for Main Fuctions
- Mainwinch is Electrical Operated Danfoss
- Auxiliary: Auger Cleaner Woltman 600mm
- Hydraulic Generator 3500 W
- Hydraulic Waterpressure Cleaner
- Hydraulic Lift on Pile-Boom for Vertical Transport
- Location: Europe
View more Rotary Drills
60 Pitch Sprocket ID: 155640
- 48 Teeth.
- Quantity: 2.
Please contact us for more information.
View more Conveyor Parts
350 Ton Per Hour Classifying Plant. 10 ft. x 40 ft. Greystone Portable Classifier with Twin 44 in. Screws. Powerscreen Commander 1400 Screen. 120 HP Fresh Water Pump. ID: 45579
350 Ton Per Hour Classifying Plant. 10 ft. x 40 ft. Greystone Portable Classifier with Twin 44 in. Screws. Powerscreen Commander 1400 Screen. 120 HP Fresh Water Pump.
7.5 HP Electric Motor ID: 698278
- HP: 75
- Voltage: 575
- RPM: 1775
- Frame: 365T
- 3 Phase
- Location: Western Canada
View more Electric Motors
Square D 3 Pole 50 Amp Push-in Breaker ID: 163538
- 240 VAC
- 3 Phase
- Push-in
- Quantity 2
View More 50 Amp Breakers
Manufacturer: | SQUARE D |
Used Sag Mill. 20 ft. x 7 ft. Long. 800 HP. Steel Lined. Inching Drive. ID: 44511
Used Sag Mill. 20 ft. x 7 ft. Long. 800 HP. Steel Lined. Inching Drive.
Rex 225 kVA Transformer ID: 198581
- 225 kVA.
- Volts:
- Primary: 600V.
- Secondary: 208Y/120V.
- 3-Phase.
- Type: Ann.
- S/N: C 26028.
View more 225 kVA Transformers
Manufacturer: | REX |
Sew Eurodrive 2.84:1 Ratio Speed Reducer ID: 81115
- Parallel type.
- Serial # 72442.
- 4-1/4 in. and 3-7/16 in. shafts.
Square D Size 4 Combination Starter ID: 186766
- 600 VAC
- 100 HP
- Fused
- 300 VA 600/120 Control Transformer
- 120 VAC Control Coil
- NEMA 3R Enclosure
- Quantity 1
View More Size 4 Combination Starters
Manufacturer: | SQUARE D |
2016 Atlas Copco SmartROC T45 Drill ID: 1418571
2016 Atlas Copco SmartROC T45 Drill
- Make: Atlas Copco
- Model: SmartROC T45-11
- Year: 2016
- Type: Quarry and Construction Drill
- Hours: 10,771 Total Hours
- Impact Hours: 4,252 Hours - Only 83 Percussion Hours since last Drifter Service/Reseal
- Engine Hours: 10,771 Hours
- Condition: Used Condition
- Configured for T51 Tooling
- Drilling Method: Tophammer
- Rock Drill: Atlas Copco COP 2560
- Boom: Folding Boom
- Engine: CAT 9.3 Diesel Engine
- Compressor: Atlas Copco C146-07 - 472 CFM @ 174 PSI
- General Model Specifications:
- Hole Range:
- T45, T51: 89–127mm (3.5”– 5”)
- Max Hole Depth: 29m (95ft) - Hydraulic Rod Handling System, with 3.6m (12’) Extension Rods and a 4.2m (14’) Starter Rod
- Rock Drill: COP 2560
- Impact Power: 25kW (33.5HP)
- Hydraulic Pressure: 230 bar (3,335 PSI)
- Impact Rate: 44Hz
- Torque: 1,555Nm (1,147 lbf/ft)
- Feed: T45 with Folding Boom
- Feed Extension: 1,150mm (3’ 9’’)
- Feed Rate, Max: 0.9 m/s (177 ft/min)
- Feed Force, Max :20kN (4,496 lbf)
- Tractive Pull, Max: 30kN (6,744 lbf)
- Total Length: 7,700mm (25’ 3’’)
- Travel Length: 4,610mm (15’ 2’’)
- Compressor: Atlas Copco C146-07, Screw Type Compressor
- Working Pressure, Max: 12 bar (174 PSI)
- FAD, at Normal Working Pressure: 223 l/s (472 CFM)
- Dust Collector: DCT 200
- Filter Area: 20m² (215 sq.ft)
- Number of Filter Elements: 20 pcs
- Suction Capacity at 500mm W.G: 540 l/s (1,144 CFM)
- Suction Hose Diam: 127mm (5’’)
- Cleaning Air Pressure, Max: 7.5 bar (109 PSI)
- Cleaning Air Consumption: 2-4 l/pulse (0.06 - 0.12 cu.ft/pulse)
- Carrier:
- Tramming Speed: 3.4 km/h (2.1 mph)
- Track Oscillation: ±10°
- Ground Clearance: 405mm (16”)
- Main Components:
- Crawler Type Two-Speed Undercarriage with Track Oscillation System
- Caterpillar Turbocharged Diesel Engine
- Atlas Copco Screw Type Compressor
- Dust Pre Separator
- Combined Warning Sound and Warning Light
- Folding Boom System
- Automatic Cooler Fan Control
- Air Flow Switch
- Rock Drill Lubrication System
- COP Logic
- Toe-Hole Drilling System
- Carousel Type Rod Handling System
- Hydraulic Double Drill Steel Support with Movable Dust Collector Hood
- Double Hose Drum
- Dust Collection System
- AutoPos
- Automatic Rod Adding
- Operator’s Cabin, ROPS and FOPS Approved
- Hole Range:
- Location: USA
View More Quarry Drills
CAT 4.3 MW Generator Sub-Station Package ID: 536541
Generator and Substation Package:
CAT Model 3616 Diesel Engine
- Year: 2011
- Hours: 630
- Displacement: 296 L
- Valve Lash: 0.6 mm
- Valve Lach 1.0 mm
- Max Rated Speed (RPM): 1000
- Bore 280 mm
- Stroke 300 mm
- 16 Cylinders 4-Stroke Turbocharged After Cooled
- Exhaust and Silencer System
- Smithco Radiator
- Air Filters
KATO Synchronous AC Generator
- 4272 KW
- 5340 KVA
- 2402/4160 Volt
- 3 Phase
- 60 Hz.
- 900 RPM
- 741 Amp
- 8 P.F.
Also Available:
GE Prolec Load-Tap Changing Transformer
- Serial No. G2704-01
- Voltage Rating: 69000 – 4160 Y/2400
- 3 Phase
- 60 Hz.
- Altitude Rating: 2300 meters
- KVA Rating
- 12,000 Continuous @ 55 C Rise ONAN
- 13,400 Continuous @ 65 C Rise ONAN
- 16,000 Continuous @ 55 C Rise ONAF
- 17,900 Continuous @ 65 C Rise ONAF
- Impedance @ 75 C
- %Z – 7.020
- KVA Base – 12,000
- kV Base – 69 – 4.16
Control Panels
- Substation Control Room
- IE – Intermountain Electronics Inc. MV Switchgear
- Input: 3000A @ 4.16KV
- Output 1: 3000A @ 4.16KV
- MFG Date: June 2012
Kaeser Air Compressor with 2000 Liter Tank
Additional Equipment:
- Substation Structures
- Tensioners
- Connectors
- Grounding disconnector system
- Lightening grounding system
- Bar insulators
- Voltage transformers
- Interlock Coils Box
- Marshaling Box Switch Panel
- High Voltage Insulators
- Electrical Panel and Transformer for Lighting Brand: GENERAL PACIFIC, 15KVA, 60HZ, 3 Phase, No. 219118-03
Location: Central America
View more Diesel Generators
Westinghouse 200 Amp Disconnect ID: 192629
- Cat.: RHF-424N.
- Volts: 240V.
- Std HP: 25.
- Max HP: 50.
- Single Throw Fusible.
- Includes
- (3) Shawmut Gould 150 Amp Fuses.
View more 200 Amp Disconnects
Hardinge SAG Mill 6.4m Dia x 3.35m EGL (21 ft. x 11 ft.) ID: 540493
- Hardinge SAG Mill 6.4m Dia x 3.35m EGL (21 ft. x 11 ft.)
- 2875 HP Motor
- Complete With:
- Liner Handler
- Jib Crane
- Drum Handler
- Vent Ducting
- Motor Fan
- Air Cooled Oil Cooler
- Motor Vent Filter
- Oil Heater
- Ball Charger
- Complete Lubrication System
- Complete Control System
- Inching Drive
- Located in Central America.
Available separately or as part of a complete 5000 TPD Gold and Silver Plant
View more SAG Mills
Eimco 4 ft. x 20 ft. Belt Filter ID: 83853
- Please inquire for additional information.
Manufacturer: | EIMCO |
John Deere 410J Backhoe ID: 515133
- Model: 410J
- Year: 2011
- 4x4
- Front Hydraulic Quick Copler with
- Standard Bucket
- Rear Manual Copler with
- Hyd/Aux
- Teeth Bucket
- Location: Eastern Canada
View more Backhoes
ASCO 1000A, 480V Auto Transfer Switch ID: 1379718
ASCO 1000A, 480V Auto Transfer Switch
Quantity: 2 Units Available
- Make: ASCO
- Category: 3ATS
- Model: H03ATSA31000NG0C
- Type: Automatic Transfer Switch
- DOM: 02/2016
- Condition: Used, Reported in "Like-New" Condition
- Pole: 3 Pole
- Current: 1000 Amp
- Voltage: 480Y/277 Volt
- Frequency: 60Hz
- Phase: 3-Phase
- Emerson Control Panel
- Location: Western Canada
View More Transfer Switches
Ansul Fire Extinguisher ID: 237046
- Model: LT-1-A-20-G-1
- Available: 25
- Location: Western Canada
View more Saftey Equipment
ITT General Hydramotor Gas Valve ID: 1066685
Type: AH8B112A4
120V 60Hz
ACTR Oil: 156202H
Opening Time: 7-14 Seconds
Max Closing Time: 1 Second
Aux Switch: 120V 15A
240V 7.5A
Valve Seal Overtravel Interlock Switch: 15A @120V
7.5A @240V
Operating Temp: -40° to 150°F
Stem Force: 200lbs @75°F
Nema 1 General Purpose Enclosure
Cutler Hammer Size 0 Combination Starter ID: 190314
- 120 - 600 VAC
- Single Phase or 3 Phase
- 18 Amp @ 600 VAC
- 5 HP @ 480/600 VAC 3 Phase
- 3 HP @ 230 VAC 3 Phase
- 2 HP @ 240 VAC Single Phase
- 1 HP @ 120 VAC Single Phase
- Auto/Start/Stop Buttons
- NEMA 1 Enclosure
- Quanitty 1
View More Size 0 Combination Starters
Manufacturer: | CUTLER HAMMER |
Sandvik MT520 Roadheader ID: 1336758
Sandvik MT520 Roadheader
- Make: Sandvik
- Model: MT520
- Type: Roadheader
- Serial: 023
- Condition: Used, Reported In Good Condition
- Year: 2016
- Hours:
- Hydraulic Motor: 5,542 Hours
- Cutting Head Motor: 3,756 Hours
- Description: The Sandvik Roadheaders are Electro-Hydraulically Powered and equipped with powerful, geometrically optimized, inline or transverse cutter heads proven to give the best cutting performance in a wide range of rock conditions. Subway tunnels, road tunnels, shaft sinking, rehabilitation of existing tunnels and excavation of underground caverns are just a few examples where these machines have demonstrated their great flexibility. Our Sandvik MT520 PLC-controlled Roadheader has been designed for use in tunneling, as well as salt, potash and chalk mining with a maximum profile up to 70m². It has a modular design that offers more flexibility than standard Roadheaders and works in most rock conditions up to 100 MPa compressive strength.
- General Model Specifications:
- Total Weight (+/-5): 120 Tons
- Machine Ground Pressure: 0.22 MPa
- Overall Length: ~ 20m
- Height: 5.1m
- Loading Table Width: 4.56m
- Cutter Boom Telescope: 1200mm
- Cutting Height, Max: 7.1m
- Cutting Width, Max: 10.3m
- Undercut - Extended Telescope: 750mm
- Cutter - Retracted Telescope: 115mm
- Cutting Speed, 50 Hz: 1.5m/sec
- Cutter Head Speed: 2.68m/sec
- Navigable Gradient, Incline/Decline: ±18°
- Capacity of Conveyor, Max: 350m³/h
- Electric Supply Voltage: 1000/1140 Volts
- Cutter Motor: 315kW
- Tramming Speed: 0-20m/min
- Total Installed Power: 537kW
- Overall Dimensions:
- Length: 20m
- Width: 4.56m
- Height: 5.1m
- Weight: 120,000 Kgs
- Location: Western Canada
View More Roadheaders
Polymer Systems Granulator ID: 256480
- Model: 1526A
- 50 HP
- 480 Volt
- 3 Phase
- 15” x 26” Throat
- 3Knives
- 2 Bed Knives
- Loading Hopper
- 2,500 lbs. per hour
- Extra Stand to Elevate 60”
- Feed Conveyor: 16" wide & 18/ft long
- Dumper
- Location: Eastern USA
View more Granulators
High Volume Fire Hose ID: 1199276
High Volume Fire Hose
Quantity: 6 Hoses
- Hose Length: 100 ft.
- Hose Inside Dia.: 4 in
- 4in Angus Quick Coupler Ends
- Max. Working Pressure @ 70°F: 250 PSI
- Burst Pressure: 750 PSI
- Fire Hose Type: Single Jacket
- Hose Reinforcement Type: Woven
- Hose Reinforcement Material: Polyester
- Jacket Material: Rubber
- Hose Cover Material: Rubber
- Hose Tube Material: PVC Nitrile
- Temp. Range: -36°F to +158°F
- Hose Colour: Red
- Compatible Chemicals: Air, Fresh Water, Salt Water
- Standards: NFPA 1961 Standard, ULC Listed
- Location: Savona, British Columbia, Canada
View More Hose
1974 Telsmith 48FC Cone Crusher ID: 1423164
1974 Telsmith 48FC Cone Crusher
- Make: Telsmith
- Model: 48FC
- Type: Cone Crusher Mounted on Wheeled Chassis
- Style: Fine Crushing Gyrasphere
- Year: 1974
- Condition: Used, Reported in Perfect Working Condition
- Complete Rebuild 300 Hours Ago
- Liner: Medium - Good Shape
- Includes an Additional New Coarse Liner
- Drive: 200HP Electric Motor
- Voltage: 480 Volt
- Lubrication System Included
- Under Crusher Conveyor: 30in Wide x 12ft Long
- Drive: 5HP, 480 Volt Electric Motor
- Drive: 5HP, 480 Volt Electric Motor
- General Model Specifications:
- Feed Opening:
- Open Side: 3in
- Closed Side: 1.875in
- Recommended Minimum Discharge Opening: 0.3125in (5/16")
- Capacity: 180 TPH @ 0.875in (7/8") Discharge (55 TPH @ 0.25in (1/4") Discharge)
- Feed Opening:
- Location: Northeast USA
View More Cone Crushers
Leeson Wattsaver 5 HP Motor ID: 174738
- 184T Frame
- 50/60 Hz
- TEFC
- @ 50 Hz
- 190/380 VAC
- 1445 RPM
- 7.7/15.4 Amps
- 1.15 S.F.
- @ 60 Hz
- 208-230/460 VAC
- 1760 RPM
- 6.4/13.8 Amps
- 1.15 S.F.
- Quantity 4
View More 5 HP Motors
Manufacturer: | LEESON |
3 Deck Gravel Processing Plant ID: 205974
- Gravel processing plant.
- Located in Germany.
- Climbing conveyor:
- AA 82 ft/31 in. (+ extension 32 ft - without rubber).
- Deck Screens:
- One 13 ft. x 5 ft. with washing.
- One 16 ft. x 5 ft. with washing.
- Conveyor belts:
- 2 conveyor belts on wheels AA 46 ft/20 in.
- 1 conveyor belt on wheels AA 33 ft./20 in.
- 2 conveyor belts on wheels AA 66 ft./26 in.
- Sword Wash:
- Year: 2007.
- 11.5 ft. long.
- 31 in. diameter.
- Bucket Wheel:
- Make Liebchen.
- Type SLZ 60.
- Year of construction 1995.
View more Wash Plants
24 in x 36 ft Channel Conveyor ID: 152369
- 24 in. x 36 ft. Channel Conveyor.
- 3 available.
- Length:
- Center of head pulley to center of tail pulley.
- 36 ft.
- Center of head pulley to center of tail pulley.
- Troughing idlers:
- 20°, 4 in. diameter.
- Idler spacing:
- 42 in.
- 20 in. spacing near tail.
- 42 in.
- Head pulley:
- 10 in. rubberized.
- Tail pulley:
- 8 in. self-cleaning.
- Shaft mount reducer:
- Dodge hydraulic R25.
- 2517 bushing.
- Dodge hydraulic R25.
- Motor:
- Hydraulic.
- Belting:
- 2 ply.
- 2 units smooth.
- 1 unit textured.
- 2 ply.
- Length:
- 3 available.
Please contact us for more information.
Westinghouse 3 Pole 60 Amp Bolt-on Breaker ID: 163531
- 240 VAC
- 3 Phase
- Bolt-on
- Type HACR
- Quantity 2
View More 60 Amp Breakers
Manufacturer: | WESTINGHOUSE |
Cummins Diesel Generator ID: 117828
- Cummins Diesel Generator.
- Cummins VT12-635-GS.
- Hours: 2,017.
- Generator is in fair condition.
- Dimensions (L x W x H):
- 136 in. x 89 in. x 55 in.
- Skid dimensions (L x W):
- 112 in. x 30 in.
- Dimensions (L x W x H):
Please contact us for more information,
Manufacturer: | CUMMINS |
Alfa Laval MAB 103 OCM-C 103 Separator ID: 1377180
Alfa Laval MAB 103 OCM-C 103 Separator
- Make: Alfa Laval
- Model: MAB OCM-C 103
- Separator: MAB 103 B-24
- Year: 2010
- Application: Continuous Cleaning of Heavy Fuel Oil or Lubricating Oil from Solid Particles
- Hydraulic Capacity: Maximum 1.4 m³/h
- Max Density of Feed: 1100 kg/m³
- Max Density of Sediment: 5,000 kg/m³
- Bowl Speed: 8,570-8,600 RPM
- Motor: 0.75kW
- Motor Shaft Speed: 1500 RPM
- Heater: 14kW
- Voltage: 415 Volt
- Frequency: 50Hz
- Comes with Tools
- Location: Europe
View More Centrifuges
Year: | 2010 |
Patterson 30 in. x 42 in. Batch Mills ID: 79208
- Inside diameter: 27.5 in. 39.5 in.
- Ceramic lined.
- Ceramic ball charge, 1.5 in. dia. minus.
- Babbit bearings.
- One mill with 3/4 in. grid door discharge.
- One mill with closed door.
- Pedestals included.
Used Secan Stopers 250's ID: 45157
Used Secan Stopers 250's
Case 580N Backhoe ID: 177799
- Year: 2011.
- Hours: 1850.
- Fuel type: diesel.
- Heat and air conditioned cab.
- Four wheel drive.
- Includes:
- Extend-a-hoe.
Please contact us for more information.
View more Backhoes
Ingersoll Dresser 2LLR-11 Split Case Pump ID: 188948
Pump:
- Model: Ingersoll Dresser 2LLR-11.
- Type: Horizontal, split case and volute.
- Use: For water and general service.
- Impeller diameter: 10.90.
Motor:
- Model: US Electric 100 hp motor.
- RPM: 3560.
- Volts: 230/460v.
- Phase: 3.
- Frame: 405TS.
Quantity: 2
View more Split Case Pumps
G900 Track Drill Package ID: 145636
- G900 Track Mounted Geotechnical Drill Package.
Please contact us for more information.
7ft Cone Crusher ID: 1383343
7ft Cone Crusher
- Size: 7ft Diameter
- Condition: Used
- Location: Mexico
View More Cone Crushers