Equipment Quotes
Minearc Systems Rescue Shelter Package ID: 440254
- 4.8m L x 1.9m W x 2m H
- 5 Units Available
View more Safety Equipment
400kW Cat Diesel Generator ID: 1287784
400kW Cat Diesel Generator
- Make: Caterpillar
- Model: C13 Engine
- Duty: Continuous
- Condition: New, Never Used
- Portable/Stationary: Portable, Skid-Mounted
- Engine: Cat C13
- Hours: 0 Hours
- Oil: API CJ-4, Capacity - 34 Liters (9 Gal)
- Radiator: Air-to Air, Charge Air Cooled, Capacity - 34 Liters (12 Gal)
- Generator: Stamford UCI224C1
- kVA/kW: 400kW (500VA)
- RPM: 1800
- Voltage: 480 Volt
- Amperage: 602 Amps
- Frequency: 60Hz
- Phase: 3-Phase
- Control Panel: CAT EMCP 4.2
- Location: Northwestern Canada
View More 301-400kW Diesel Generators
Square D Size 5 Magnetic Coil ID: 992574
Square D magnetic coil
Size 5
Type 31096-400-09
260va max
120 vac @ 60hz
110 vac @ 50hz
Kohler 300kW Diesel Generator ID: 1138363
Kohler 300kW Diesel Generator
- Make: Kohler
- Model: 300REOZD
- Stationary/Portable: Stationary
- Year: 2000
- Hours: 421
- Condition: Used
- Service Duty: Standby
- Engine: Detroit Diesel Series 60 (490HP@1800RPM)
- Hours: 421
- Oil: 36L Capacity
- Radiator: Standard Air to Air
- Generator: 4UA13
- kVA/kW: 375kVA/300kW
- Voltage: 277/480V
- Amperage: 451A
- RPM: 1800 RPM
- Overall Dimensions:
- Length: 135" (Approx.)
- Width: 56" (Approx.)
- Height: 118" (Approx.)
- Weight: 14,500 Lbs
- Additional Information:
- Weatherproof Enclosure
- 555 Gallon Double Wall Base Fuel Tank
- Location: USA
View More Diesel 300-400kW Generators
Used Eimco Piston Air Motor. Model:200 ID: 41824
- Eimco Piston Air Motor.
- Model: 200
- 5 cylinder
- Rated at 10 HP
- 90 PSI.
- 1100 RPM.
- Reversible.
Rapid G400-6CK Granulator ID: 1382467
Rapid G400-6CK Granulator
- Make: Rapid
- Model: G400-6CK
- Year: 2007
- Condition: Used, Reported in Good Condition
- 5 Rotor Blades
- 2 Bed Knives
- Drive: Electric Motor
- Power Output: 15HP
- Voltage: 480 Volt
- Current: 18 Amps Full Load
- Frequency: 60Hz
- Phase: 3-Phase
- Location: Western Canada
View More Granulators
GE 175 kVA Drive Isolation Transformer ID: 187953
- No: 9T23B4011G22.
- Primary Voltage: 460.
- Secondary Voltage: 460Y/266.
- Ph: 3.
- Hz: 60.
- Enclosure: Type 2 Rainproof.
View more 175 kVA Transformers
Bruks 602 CS Wood Chipper ID: 1393326
Bruks 602 CS Wood Chipper
- Make: Bruks
- Model: 602 CS
- Serial: 94 42030
- Would require approx. a 60hp (45KW) motor.
- Condition: Used, Reported in Good Condition
- Gravity Feed
- Feed Opening: 22in Wide x 16in High
- Discharge: 22in Wide x 16in High - Grated with 2in x 2in Openings
- 22in Wide Rotor - Spins Freely
- Dual Blade
- 4-Groove Flywheel - 18.75in Diameter
- Foot Print: 33in Long x 31.5in Wide
- With Telemecanique XCK-J Limit Switches
- With Extra Blades - 22in Wide
- (3) 5.5in Long
- (4) 6.75in Long
- Overall Dimensions:
- Length: 47in
- Width: 36in
- Height: 61.5in
- Location: Savona, British Columbia, Canada
View More Sawmill Equipment
Cutler Hammer MCC Section. 480 Volt. 600 Amp Vertical and Horizontal Boss ID: 44569
Cutler Hammer MCC Section. 480 Volt. 600 Amp Vertical and Horizontal Boss
Denver Duplex Mineral Jig ID: 1401227
Denver Duplex Mineral Jig
- Make: Denver
- Type: Duplex Mineral Jig
- Size: 24in x 36in
- Condition: Used, Reported in Good Condition
- Mill Capacity per 24 Hours: 400-800 Tons
- Solution: Water or Cyanide
- GPM: 35-55
- Tons/24 Hours: 210-330
- Bedding Material: 225 Lbs. Required
- Drive: 10HP Electric Motor
- Location: Southwest USA
View More Mineral Jigs
Caterpillar C32 Marine Engines ID: 1424478
Caterpillar C32 Marine Engines
Quantity: 4 Units Available
- Make: Caterpillar
- Model: C32
- Type: Diesel Marine Engine
- Year:
- Units 1 & 2: 2010
- Unit 3: 2012
- Unit 4: 2013
- Hours:
- Units 1 & 2: 10,500 Hours
- Unit 3: 8,500 Hours
- Unit 4: 8,000
- Condition: Used Condition
- Power Output:
- Units 1, 3 & 4: 1,450HP
- Unit 2: 1,702HP
- Rotation Speed: 2,300RPM
- Emissions Tier:
- Units 1 & 2: T1
- Units 3 & 4: T2
- Gearbox:
- Model: ZF 3050
- Ratio: 1.5:1
- Location: Middle East
View More Marine Engines
Pennsylvania Crusher JRT-1 Hammer Mill ID: 1263316
Pennsylvania Crusher JRT-1 Hammer Mill
- Make: Pennsylvania Crusher Corp.
- Model: Non-Reversible Hammer Mill
- Size/Type: JRT-1
- Serial: 7334
- Rated Capacity: 15 STPH @ 6mm Screen
- Left Hand Assembly
- Feed Size: 125mm
- Product Size: 95% Minus 6mm
- Screen Bars: 19mm (0.75in)
- Hammer Type: Paddle Hammers
- # of Hammers: 12 Total
- Hammer Rows: 4 Rows
- Hammers Per Row: 3 Hammers
- Drive: Electric Motor
- Power Output: 30HP
- RPM: 1765
- Voltage: 575 Volt
- Type: V-Belt Drive
- Location: Eastern Canada
View More Hammer Mills
50kVA Delta EVI Transformer ID: 1202436
50kVA Delta EVI Transformer
- Make: Delta
- Model: CD1A0050HRA6XXLD
- Serial: DRF-0118-179597
- kVA: 50kVA
- Type: Dry
- Phase: 1-Phase
- Frequency: 60Hz
- Primary Voltage: 208 Volt
- Secondary Voltage: 240/480 Volt
- Enclosure: NEMA 3R
- Overall Dimensions:
- Width: 23in
- Depth: 26in
- Height: 36in
- Weight: 387 Lbs. (176 kg)
- Location: Savona, British Columbia, Canada
View More Dry Type Transformers
ATC 30 Second Timer ID: 1070902
Type: 305D007A10PC
120V 60Hz
30 Second Timer
10A@120VAC
5.0 m³ Pump Box ID: 150087
- Model: E03-PBX-005.
- New/unused.
- 5.0 m³.
- (2) 10 inch bottom flanges.
- (1) 4 inch bottom flange.
- (1) 12 inch top flange.
- Please see the specs tab below for more detailed information.
- New/unused.
- Shipping information:
- Dimensions (L x W x H):
- 79 in. x 99 in. x 99 in.
- 2.01 m x 2.51 m x 2.51 m.
- Dimensions (L x W x H):
Please contact us for more information.