Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
Positive Displacement Pump. Model: C6DB-137. ID: 44183
- IMO Three Screw Pump
- Series 6
- Model: C6DB-137.
- Output Pressure:
- 1500 PSI
- 103 BAR
- Capacity Range:
- 7 - 28 GPM
- Speed Range:
- 1150 - 3500 RPM
- 2 Units Available
- Location: BC Canada.
Wemco 190 Flotation Mechanisms ID: 83479
- 1500 Cu Ft Cells.
- Guarding included.
- Spare shaft & bridge assembly.
- 2 units available.
Midwest 4CT18 ID: 1075444
Type: 4CT18
800:5
Current Transformer
2VA
Cycles: 25-400
11.5 Cubic meter Membrane Filter Press for Sale ID: 51213
- 11.5 cubic meter membrane filter press.
- New and unused.
- 110 plates made with 100 percent virgin polypropylene.
- Dual feed and dual cylinder.
- Max feed pressure of 300 PSI.
- Unit can cycle up to four times per hour.
- Mine duty construction.
- Auto plate shifting and core blow.
- 4 corner filtrate collection and side tapped with stainless filtrate collection troughs.
Universal 16ft. Chain Bucket Elevator ID: 402853
- Model: U1
- Dodge Shaft Mounted Reducer
- Class I Operation
- 3 Phase
- 60 Hz
- 230/460 Volt
- TEFC
- Premium Efficiency
- Spout Hopper
- Narrow Inlet
- 6in. x 4in. 18 Gauge Steel Buckets
- Location: Eastern USA
View more Bucket Elevators
15ft³ Pug Mixer ID: 1234161
15 Cubic Foot Pug Mixer
- Make: Crossman Machinery Company
- Type: Pug Mill
- Size: 2ft x 2ft x 5ft Wide Open Top Mixer
- Heavy Duty Mixer Shaft and Paddles
- Chain Driven through a Right Angle Reducer and Electric Motor
- Mounted 3.5ft High Legs
- With Manual Slide Discharge Gate
- Location: Savona, British Columbia, Canada
View More Various Cement Equipment
Montabert H-70 Hydraulic Drifter Drill ID: 705339
- Shank: 7/8 in. x 108 mm
- Weight: 40 kg
- Length: 585 mm
- Profile Height from Rod Center: 56 mm
- Rotation Rate: 0- 350 RPM Independent, Reversible Rotation
- Impact Rate: 80 Hz @ 150 Bar
- Rotation Torque: 90 Nm @ 120 Bar
- Hydraulic Requirements
- Percussion Pressure: 120 - 150 Bar
- Oil Flow: 60 - 70 L/Min @ 120 - 150 Bar
- Viscosity: Range: 60 - 30 CST
- Air Flushing:
- Air Consumption: 600 - 950 L/Min @3/5 Bar
- Relief Valve Set: 7 Bar
- Shank Lubrication: Standard
- Water Flushing:
- Water Consumption: 5 - 10 L/min
- Water Pressure: 2 - 6 Bar
- Air Consumption: 200 - 300 L/Min @ 3-5 Bar
- Flushing Pipe Diameter: 5 mm
- Location: British Columbia, Canada
View more Drifter Drills
JLG 1255 Zoom Boom ID: 1005749
- Model: 1255
- Hours: 3662
- Year: 2015
- Fuel Type: Diesel
- Cab: Heat & AC
- Carriage Width: 72 in.
- Forks: 72 in. Pallet
- Tires: Foam Filled
- Location: Eastern USA
View more Zoom Booms
Caterpillar 416C Loader Backhoe ID: 123315
- Caterpillar 416C Loader Backhoe.
- Year: 1997.
- Hours: 11693.
- Comes with:
- Extendahoe.
- 24 in. digging bucket.
- Clean up bucket.
- Also available.
- Ditching bucket.
- Frost bucket.
Please contact us for more information.
Manufacturer: | CATERPILLAR |
2016 Sandvik LH204 Scooptram ID: 1424352
2016 Sandvik LH204 Scooptram
- Make: Sandvik
- Model: LH204
- Year: 2016
- Hours: 3,644 Hours
- Condition: Used, Reported in Good Condition
- Canopy: ROPS/FOPS
- General Model Specifications:
- Capacities:
- Tramming Capacity: 4,000kg (8,820lbs)
- Tipping Load: 10,350kg (22,800lbs)
- Standard Bucket: 2.0m³ (2.6yd³)
- Engine: Deutz BF4M2012C Diesel Engine
- Power Output: 95kW (125HP) @2,500RPM
- Torque: 445Nm @1,500RPM
- Cylinders: 4, Inline
- Displacement: 4.04L (247in³)
- Bucket Motion Times:
- Raising Time: 4.8 Seconds
- Lowering Time: 3.4 Seconds
- Dumping Time: 3.9 Seconds
- Turning Radius:
- Turning Angle: 42°
- Inner: 2,886mm (114in)
- Outer: 5,153mm (203in)
- Overall Dimensions:
- Length: 7,766mm (306in)
- Width: 1,600mm (63in)
- Height with Canopy: 2,127mm (84in)
- Weight: 13,950kg
- Capacities:
- Can have Ejector Bucket Installed for Additional Cost
- Location: Western Canada
View More Scooptrams