Cedarapids 24 inch X 16 inch roll crusher. ID: 47943

• Cedarapids 24 inch X 16 inch roll crusher.
• On stand with electric drive motor.

Westinghouse 3 Pole 150 Amp FDB Breaker ID: 191841

• 600 VAC
• 250 VDC
• 3 Pole
• Cat #: FDB3150
• Quantity 1

View More 3 Pole 150 Amp Breakers

WEG 5HP Electric Motor and Reducer ID: 1392830

WEG 5HP Electric Motor and Reducer

• Make: WEG Motors Ltd.
• Model: 184T 1269
• Condition: Used
• Power Output: 5HP
• Speed: 1740 RPM
• Voltage: 575 Volt
• Current: 4.8 Amps
• Frequency: 60Hz
• Frame: 184T
  
  
• Reducer: David Brown Radicon
  • Series: AU500-8
  • Ratio: 30-1
  • Output: 58 RPM
    
    
• Location: Savona, British Columbia, Canada

View More 5HP AC Motors

Gould 2 Amp Fuse ID: 188492

• 600 VAC
• Class C
• Cat #: FES2
• Style: Bolt-On, or Ferrule
• Length: 2.25" Ferrule, 3.375" Bolt-On
• Quantity 46

View More 2 Amp Fuses

2010 JLG 600AJ Articulating Boom Lift ID: 195445

• Platform Height: 60 ft 7 in. / 18.47 m.
• Platform Capacity- Unrestricted: 500 lb / 226.80 kg.
• Horizontal Reach: 39 ft 9 in. / 12.12 m.
• Basket: 8 ft. wide with side entry.
• Auxiliary Power: 12 Volts DC.
• Capacity- Fuel Tank: 30 gal. / 113.56 L.
• Enginer Type- Diesel: DEUTZ TD 2.9L Tier 4 Final 67 hp.
• Axle Oscillation: 8 in. / 0.2 m.
• Drive speed - 4WD: 4.25 mph / 6.84 km/h.
• Gradeability - 4WD: 45%.
• Swing: 360 Degrees.
• Swing Type: Continuous.
• Turning Radius- Outside (4WS): 11 ft 8 in. / 3.56 m.
• Jib- Range of articulation: 130 Degrees. 

View more Boom Lifts

English Electric Class H 400 Amp Fuse ID: 170550

• 600 VAC
• Class H
• Type: C400HR
• Style: Knife
• Length: 11.63 in.
• Quantity 4

View More 400 Amp Fuses

Square D 3 Pole 60 Amp Type FA I-Line Breaker ID: 162634

• 240-480 VAC
• 250 VDC
• 3 Phase
• Cat #: FA34060
• Type: FA Series 2
• Quantity 1

View More 60 Amp Breakers 

(2) Westpro Machinery FLO.2-6 Flotation Cells ID: 1400758

(2) Westpro Machinery FLO.2-6 Flotation Cells

Quantity: 2 Units

• Make: Westpro Machinery
• Model: FLO.2-6
• Condition: New Surplus
• Banks: Banks of 6 Cells
• Style: DR Style
• Cell Dimensions: 
  • Length: 6.75in
  • Width: 6.75in
  • Depth: 10.625in
• Overflow Discharge with Stainless Launder
• Each Flotation Mech. comes with Deublin Rotary Air Feed
• Belt Driven by a 1HP Motor 
  • Voltage: 575 Volt
  • RPM: 3480
  • With Manual On/Off Switch
    
    
• Cells are Made of Stainless Steel
  • Setup on a Hinged/Pivoting Manual Dump/Cleaning System
    
    
• Mounted on Steel Frame with Built-In Clean Out Trough
  • Center 1in Pipe Discharge
  • Also Comes with Internal Cell to Cell Removable Flow Control Plated
    
    
• Overall Dimensions:
  • Length: 78in
  • Width: 30in
  • Height: 55in
    
    
• Location: Savona, British Columbia, Canada

View More Flotation Cells

Illinois 302 CB Blower ID: 189599

• Blower 1:
  
  • No.: 3728.
  • Size: 302 CB.
  • Inlet: 6 In.
  • Outlet: 4 In. x 4 In.
• Blower 2:
  • Serial: 3726. 
  • Size: 302 CB. 
• Motor:
  • Baldor 25 HP Industrial Motor. 
  • Volts: 230/460V.
  • RPM: 3530.
  • AMPS: 58/29.
  • Phase: 3.
  • Hz: 60.
  • Frame: 284TS.
  • Cat No.: M41071. 
  • Spec.: 10R080X188HI. 

View more Centrifugal Blowers 

Crane 4in Gate Valve ID: 1404513

Crane 4in Gate Valve

• Make: Crane
• Series: 465 1/2
• Size: 4in
• Construction: Bronze Trim
• Condition: Used Condition
• Class: 125S
• Pressure Rating: 200-WOG
  
  
• Overall Dimensions:
  • Width: 11in
  • Height: 21in
    
    
• Location: Savona, British Columbia, Canada

View More Gate Valves

4500 Gallon Mixing Tank with 10HP Agitator ID: 1155235

4500 Gallon Mixing Tank with 10HP Agitator

Quantity: 2 

• Size: 4,544 US Gallons  
  • Diameter: 118"
  • Height: 96" 
    
    
• Motor:
  • HP: 10 HP
  • Voltage: 230/460V
  • RPM: 1735 RPM
  • Frequency: 60Hz
    
    
• Rubber Lined
  
  
• Location: TBA

View More Agitators and Mixers

Sandvik HLX5 Hydraulic Drifter Drill ID: 705227

• Model: HLX5
• Hours: 150 
• Hole Diameter Drilling: 43 - 64 mm
• Hole Diameter: Reaming: 76 - 127 mm
• Power Class: 20 kW
• Percussion Rate: 67 Hz
• Operating Pressure Percussion: 120 - 220 Bar
• Max Rotation: 175 Bar
• Drill Steels: R32, R39 or Hex 35 mm Drifter Rods
• Shanks: 45 mm/T3B/R32/T35/R38/T45
• Weight: 210 kg
• Location: Middle East

View more Drifter Drills

P&H Outdoor 10 Tonne Capacity Crane ID: 1361705

P&H Outdoor 10 Tonne Capacity Crane

• Make: P&H
• Capacity: 10 Tonnes
• S/N: E110420
• Single Girder Overhead Bridge Crane
  • Approx. 48ft Span
  • 20ft Max Height Under Hook
• Wireless Radio Pendant Control
• 2-Speed - All Directions
  
  
• Location: Central Canada

View More Overhead Cranes

Gutor Uninterruptible Power Supply ID: 144324

• Gutor Electroninc Ltd. Uninterruptible Power Supply.
  • For the oil and gas industry.
    • Equipment no: 614-PS-6401.
      • Gutor no: 1070345028-01.
    • Manufactured in 2008.
  • Equipped with:
    • Siemens Breakers:
      • (1) 700A - HMG.
      • (3) 600A - HLGA.
      • (1) 500A - HLGA.
      • (1) 125A - HDGA.
      • (2) 100A - HDGA.
    • ABB Switches:
      • (2) 600A.
        • 600V.
        • S6H-D.

Please contact us for more information.

Lightnin Mixer ID: 451562

• 34 in. Shaft Length
• 4 in. 3 Blade Impeller
• Stainless Steel Impeller
• FHP ½ HP Motor
  • 115 Volt
  • 1725 RPM
  • Frame: 56
  • Single Phase
• Location: British Columbia, Canada

View more Agitators and Mixers

Dual Derrick FLC-503 Screen ID: 1387556

Dual Derrick FLC-503 Screen

• Make: Derrick
• Model: Dual FLC-503
• Condition: Used, Reported in Good Condition
• (2) Single Deck
• Single Side Tensioning
• Weir Feeders
• 2 Derrick SGX-34-18-460/480-6-001 Vibrators per Screen
  • Horsepower: 2.5HP
  • Voltage: 460/480 Volts
  • Current: 4.1 FLA
  • Frequency: 60Hz
• Mounted On Common Skid
  
  
• General Model Specifications: 
  • Screen Area: 
    • PMD: 49.8ft²
    • PMD+: 69.0ft²
  • Overall Dimensions:
    • Length: 145.625in
    • Width: 115.3125in
    • Height: 68.625in
    • Weir Height: 35.875in
    • Weight: 8,600 Lbs.
      
      
• Location: Western USA

View More Horizontal Screens

LittleFuse Startco SE-302 Ground Fault Relay ID: 173754

• Input.
  • 120 VAC.
  • 2 Amp.
  • 60 Hz.
• Model SE-302.
• Manual Available Upon Request.
• Quantity 1.

View More Ground Fault Relays

Morbark Hurricane 18 Brush Chipper ID: 164075

• Use for chipping all types of wood and green waste.
• Chipping capacity: 18 in. diameter @ 120 ft/min.
• 65 in. x 38 in. high folding infeed chute opening.
• 3/8 in. thick floor.
• Reversible feed control with quick shut off.
• Infeed throat opening of 31 in. x 20 in.
• Caterpillar 3054EATTAC diesel engine.
  • 140 HP.
  • 2400 rpm.
  • Dual plate clutch.
• Centrifugal pre-cleaner.
• 48 gallon fuel tank.
• Never used/installed.
• Reported in excellent condition.
• Ready to go into service.

View Spec Sheet Below

View more Sawmill Equipment

Caterpillar 3516 1400 kW Diesel Generators ID: 563735

CAT 3516, 1400 kW Diesel Gen Sets
3 Units Available.
600 Original Hours
2130 HP
Comes with Radiators & Mufflers.

• CAT Diesel Engine
  • Model: 3516
  • HP: 2130
• Marathon Electric Generator
  • Model: 684FDR8445GG W
  • kW: 1400 Prime
  • KVA: 1750
  • Volt: 2400/4160
  • Phase: 3 HZ: 60
  • RPM: 1800

• Packages Includes:
  • Switch Gear & Transfer Switches
    
    
• Location: Western USA

 View more Diesel Generators

200 AMP PIERCE NON-RENEWABLE FUSE ID: 358397

200 AMPS

VAC= 250V

CLASS:

TYPE:

LENGTH: 7"

Cutler Hammer 225 Amp Distribution Panel ID: 155968

• 120/208V.
  • 3 phase.
  • 60 Hz.
• 4 wire.
• BA bolt-in breakers.
• 42 circuit.

Please contact us for more information.

View more 225 Amp Panels

View Our Inventory of Breakers

Westinghouse 3 Pole 20 Amp Bolt-On Breaker ID: 191343

• 240 VAC Max
• 3 Pole
• Bolt-on
• Type BA
• Cat #: BAB3020H
• Quantity 2

View More 3 Pole 20 Amp Breakers

True Line 4 in. Ball Valves ID: 730222

• Size: 4 in. 
• Stainless Steel Ball 
• Body: CI
• Qty: 2
• 8 Bolt Flanges on Ends
• Location: British Columbia, Canada

View more Ball Valves

G.E. 7.5 HP Induction Motor ID: 194752

• Model: SKE213BC104.
• Volts: 575V.
• RPM: 3515.
• Frame: 213T.
• Phase: 3.
• Shaft Length: 3 3/8 In.
• Shaft Diameter: 1 1/4 In.

View more 7.5 HP Motors

Baldor-Reliance Super-E 15 HP Motor ID: 181420

• 230/460V.
  
  • 3 phase.
  • 60 Hz.
• 1765 rpm.
• Frame: 254T.
• TEFC enclosure.

View more 15 HP Motors

Korfmann 16 in. Ventilation Fan ID: 209161

• Manufacturer: Korfmann.
• Model: 32852.
• Type: DV4.
• Inlet: 16 in.
• Outlet: 11 in.
• Height: 38 in.
• Air operated.
  
  View Spec Sheet Below

View more Air Driven Ventilation Fans

# 8 - 3 Conductor Cabtire ID: 228671

• Feet: 45
• Volts: 600 Rated 
• Location: British Colombia Canada

Veiw More Cabtires

500 AMP ECON DUAL ELEMENT FPE FUSE ID: 357596

500 AMPS

VAC=600V OR LESS

CLASS:F

TYPE:FPE

LENGTH: 14"

Casagrande B 135 Piling Rig ID: 179079

• Year: 2011.
• Operating hours: 7700 (approx.)
• Max. depth in CFA; FDA: 19 m.
• Max. diameter in CFA system: 800 mm.
• Working weight: 42 tons.
• Chassis with hydraulic extending tracks.
  • Width of crawler: 2500 - 3700 mm.
  • Track width: 600 mm.
• Engine power: 164 kW.
• Main winch.
  • Line pull: 135 kN.
• Aux. winch.
  • Line pull: 70 kN.
• Pull down system: 240 kN.
• Rotary head H12.
  • Nominal torque: 112 kN.
  • Max. drilling speed: 33 rpm.
• Piling rig includes:
  • Camera system.
  • Full CFA monitoring system.
    • Jean Lutz (brand new).

View more Quarry Drills

14,500 Gallon Fiberglass Tank ID: 85589

• 8.5 ft. x 40 ft. Fiberglass Tank.
  • Double walled. 
  • Capacity: 14,500 gallons / 50,000 litres.
  • Steel manway.
  • 5 - 4 in. threaded fittings.
  • External baffles for burial.
  • Tank previously used for fuel.
    • Defumed and aerated.
• Ideal for Fire protection.

Please contact is for more information.

2014 Gehl Skid Steer ID: 237570

• Model Name: 4640
• Type: Skid Steer Loader
• Manufacturer: Gehl
• Fuel Type: Diesel
• Hours: 558
• Cab: Head
• Location: Eastern USA

View more Skid Steers