Equipment Quotes
General Electric 600 HP Electric Motor ID: 877580
- Voltage: 2300 Volt
- Horse Power: 600
- RPM: 1800
- Frame: 588US
- Location: Eastern Canada
View more Electric Motors
Siemens 200 Amp Disconnect ID: 1414909
Siemens 200 Amp Disconnect
- Make: Siemens
- Model: ID364NF
- Type: Disconnect
- Style: Non-Fusible
- Current Rating: 200 Amp
- Voltage Rating: 600 Volt
- Poles: 3-Pole
- Enclosure: NEMA 1
- Location: Savona, British Columbia, Canaday esta
View More 200 Amp Disconnects
Bonfiglioli Speed Reducer Package ID: 147271
- Speed Reducer Package.
- Consists of:
- Bonfiglioli Speed Reducer.
- Model: VF185.
- Ratio: 200:1.
- Marathon 1 hp electric motor.
- 230/460V.
- 1,200 rpm.
- 3 phase.
- 60 Hz.
- Inverter duty.
- Bonfiglioli Speed Reducer.
- Gearbox and motor never used since purchased NEW in 2009.
- Consists of:
Please contact us for more information.
Aurora 411 BF Horizontal Split Case Pump ID: 145765
- Type: 411 BF.
- 5" X 6" X 17" Impeller.
- 1200 GPM.
- 192 ft/head.
- Equipped with:
- 100 hp electric motor.
- 230/460V.
- 1,800 rpm.
- Frame: 404T.
- Continuous duty.
- 100 hp electric motor.
- 4 units available.
Please contact us for more information.
Square D 60 Amp Non-Fusible Disconnect ID: 1075144
Square D 60 Amp Non-Fusible Disconnect
- Make: Square D
- Type: Non-Fusible
- Current: 60 Amp
- Voltage: 600 Volt
- NEMA 3R Enclosure
- Comes with Start/Stop Button in Door
- Location: Savona, British Columbia, Canada
View more Disconnects
AMP-TRAP AJT40 ID: 992301
Amp-trap
ajt
40amp
time delay
General Electric 40 HP Motor ID: 155381
- 460V.
- 3,565 rpm.
- 3 phase.
- Frame: 324TS.
Please contact us for more information.
View more 40 HP Motors
. Ingersoll-Rand 1-P86 Pavement Breaker ID: 41839
- Ingersoll-Rand Pavement Breaker.
- Model 1-P86.
- 1-1/8 in. Chuck.
Telsmith 2540 Jaw Crusher ID: 1200492
Telsmith 2540 Jaw Crusher
- Make: Telsmith
- Model: 2540 Pegson
- Year: 2009
- Condition: Operational, Repowered
- Toggle: Single
- Frame Style: Single Piece
- Max Feed Size: 22in
- Min/Max Discharge:
- Min: 2.5in
- Max: 7in
- Max Capacity: Up To 217 Discharge (Up To 444 TPH@7in Discharge, Short Toggle)
- Drive: 150HP Motor Included
- Overall Dimensions:
- Length: 107in
- Width: 90.75in
- Height: 89in
- Weight: 35,515 Lbs.
- Additional Information:
- Jaw has been Repowered
- Jaw has been Repowered
- Location: South America
View More Jaw Crushers
Perrin 30 in. x 30 in. Plate Filter ID: 70332
- 11 - Lenser plate elements.
- 10 - Lenser frame elements.
- 2" Thick.
- Approx. 6.6 cubic feet of cake volume.
- Quincy series TH3 - 6 X 20 Hydraulic closing cylinder.
- Air over hydraulic manual controls.
General Electric 600 Amp Breakers ID: 160008
- 600 Amp frame.
- Adjustable trip.
- Quantity: 3.
Please contact us for more information.
View more 600 Amp Breakers
Manufacturer: | GENERAL ELECTRIC |
2008 Stamford 300 kW Gen Ends ID: 223799
- Frame/Core: HCI434E1L-0080E.
- KVA Base Rate: 375.
- kW Base Rate: 300.
- Hz: 60.
- RPM: 1800.
- Volts: 480.
- Ph: 3.
- Amps Base Rate: 451.
- PF: 0.8.
- Rating: Continuous.
- Volts: 40.
- Ex Amps: 2.00.
- Ambient Temp C: 40.
- Enclosure: IP22.
- Insulation Class: H:UL1446.
- Quantity: 4.
- Location: Central U.S.A.
View more 300 kW Generators
Manufacturer: | Stamford |
Caterpillar 14M Motor Grader ID: 196879
- Engine:
- Make Caterpillar.
- Model C11 ACERT VHP.
- Net Power Gear 1-2 259 hp/193 kw.
- Net Power Gear 3-4 274 hp/204 kw.
- Power Measured @: 1800 rpm.
- Net Power Gear 5-6: 274 hp/204 kw.
- Number of Cylinders: 6.
- Net Power Gears 7-8: 274 hp/204.3 kw.
- Max Power: 274 hp/204.3 kw.
- Displacement: 677 cu in/11.1 L.
- Operational:
- Front Axle Std Operation Weight: 12611 lb/5720 kg.
- Rear Axle Std Operation Weight: 34522 lb/15659 kg.
- Total Std Operation Weight: 47133 lb/21379 kg.
- Front Axle Max Operation Weight: 21912 lb/9939 kg.
- Rear Axle Max Operation Weight: 44086 lb/19997 kg.
- Total Max Operation Weight: 65998 lb 29936 kg.
- Fuel Capacity: 130 gal/492 L.
- Cooling System Fluid Capacity: 12.3 gal/46.5 L.
- Hydrauilc System Fluid Capacity: 15.9 gal/60 L.
- Transmission Fluid Capacity: 23.5 gal/89 L.
- Circle Gearbox Fluid Capacity: 1.6 gal/6 L.
- Tandem Case Fluid Capacity (each): 25.5 gal/96.5 L.
- Transmission:
- Type: direct drive, power shift, countershaft.
- Number of Forward Gears: 8.
- Number of Reverse Gears: 6.
- Max Forward Speed: 31 mph/49.8 km/h.
- Max Reverse Speed: 24.5 mph/39.4 km/h.
- Steering:
- Articulation L/R: 20 degrees.
- Turning Radius: 25.9 ft in/7.9 m.
- Front Axle:
- Wheel Lean: 17.1 degrees.
- Oscillation: Total 32 degrees.
- Hydraulic System:
- Pump Type: variable displacement.
- Pump Flow: 74 gal/min;280 L/min.
- Relief Valve Pressure: 3500 psi/24150 kPa.
- Moldboard:
- Moldboard Width: 14 ft in/4267 mm.
- Moldboard Height: 27 in/688 mm.
- Moldboard Thickness: 1 in/25 mm.
- Max Depth of Cut: 17.3 in/438 mm.
- Left Side Shift: 29.1 in/740 mm.
- Right Side Shift: 31.1 in/790 mm.
- Blade Pull at Max Weight: 39678 lb/17997 kg.
- Blade Down Pressure: 38666.9 lb/17539 kg.
- Circle:
- Diameter: 71.8 in/1822 mm.
- Shift Left: 25.5 in/650 mm.
- Shift Right: 20.5 in/520 mm.
- Max Reach Outside Tires: Left 85.4 in/2169 mm.
- Max Reach Outside Tires: Right 89.7 in/2279 mm.
- Max Lift Above Ground: 16.5 in/419 mm.
- Front Blade Tip Angle: 40 degrees.
- Reart Blade Tip Angle: 5 degrees.
- Dimensions:
- Height to Top of Cab: 11.6 ft in/3535 mm.
- Overall Length: 30.9 ft in/9412 mm.
- Width Over Tires: 9.2 ft in/2791 mm.
- Wheelbase: 21.5 ft in/6559 mm.
- Blade Base: 9.3 ft in/2842 mm.
- Tandem Axle Wheelbase: 5.4 ft in/1656 mm.
- Rear Ground Clearance: 1.3 ft in/383 mm.
- 7 shank ripper blade.
- 4 shanks fitted.
- Full ROPS cab.
- Hours: 9700.
View more Graders
Manufacturer: | CATERPILLAR |
Hayward Gordon HRFX-30-612 Mixers ID: 1045963
- Model: HRFX-30-612
- Shaft Length: 72 in. Long
- High-Shear Radial Flow Impeller: 24 in. Dia.
- Teco Westinghouse 3 HP Motor
- Voltage: 460
- RPM: 755
- Frame: 182T
- 3 Phase
- 60 Hz
- Sew-Eurodrive Gearbox
- Type: RF67 AM182
- 1750/152 RPM
- 11.54:1 Ratio
- Complete with Vibraswitch Malfunction Detector Switch
- Model: 366
- Model: 366
- Location: British Columbia, Canada
View more Mixers
CG Thermal SCI Ceramic Heat Exchanger ID: 969617
- Rack of 6 Heat Exchangers
- Max Working Pressure (PSI): Process 75 Service 75
- Max Working Temp (F°): Process 300 Service 300
- Hydro Test Pressure (PSI): Process 98 Service 98
- Cylinder Length: 43 in.
- Top Leach Out has 2 in. Butterfly Vales on each Heat Exchanger
- 2 in. Butterfly Vales
- Qty: 6
- Model: 200DJLE
- Flange: ASME 150
- Disc: D1
- Seat: EPDME
- Water Out has 4 in. Butterfly Valve
- 4 in. Butterfly Valves
- Qty: 1
- Brand: KITZ
- Model: 200DJL
- Flange: ASME 150
- Disc: D1
- Seat: BUNA
- Water Out Port has 2 in. Butterfly Valves on each Heat Exchanger
- 2 in. Butterfly Valves
- Qty: 6
- Model: 200DJLE
- Flange: ASME 150
- Disc: DI
- Seat: EPDME
- Leach in Bottom has 4 in. Butterfly Valve
- 4 in. Butterfly Vales
- Qty: 1
- Brand: KITZ
- Model: 200DJ
- Flange: ASME 150
- Disc: S1
- Seat: BUNA
- Location: British Columbia, Canada
View more Heat Exchangers
Yale Midget King 1000 lb Chain Hoist ID: 63742
- Roller type.
- 1000 lb capacity.
- Hook mount.
- Model: 1/2K17FMG3.
- 440 volt, 3 phase electric motor.
Allen-Bradley 700-F310A1 Industrial Contactor ID: 622818
Cat No: 700-F310A1
Series: B
600 Amp
Volts AC | Make | Break
120-600 7200VA 720VA
72-120 60A 720VA
24-72 60A 10A
Volts DC | Make/Break
46-300 138VA
5-46 3.0A
RMS Ross Derocker ID: 98432
- Model 10 x 20.
- Electric hydraulic drive.
- 15 hp, 230/460V electric motor.
- Spray bars.
Revo Actuator ID: 468597
- 24 DC Festo Actuator
- Model: RD70060050R0000
- Center Line 2 in. Butterfly Valve
- Model: AHBD5BDF
- Qty: 3
- Location: British Columbia, Canada
View more Actuators
Soilmec R518 Drill ID: 184383
- Carrier: Crawler type undercarriage with expandable tracks.
- Undercarriage:
- Length: 18 ft. (5350 mm).
- Width: 14 ft. (4600 mm) (extended).
- Operating weight: 120,000-130,000 lbs (60-65 ton class).
- Torque: 126,000 lb/ft. (172 kNm).
- Depth: 118 ft. (36 m).
- Max. diameter: 6 ft. (1800 mm).
- Optimal diameter: 36 in. - 60 in. (914 mm - 1524 mm).
- Crowd pressure: 43,800 lb/ft. (195 kN).
- Tower height: 70 ft. (21.2 m).
- Year: 1998.
View more Quarry Drills
Klockner Moeller 22 DIL M Contactor ID: 1061809
Cat No: DIL 0A M
600v AC Max
35 Amps Max
ADM 3 Silo Package ID: 239153
- ADM 820 Ton Asphalt Storage System
- Two ADM 280 Ton Silos
- One ADM 260 Ton Silos with:
- Weigh Batcher
- Insulated
- Oil Heated
- Steel Cover Top Platforms
- Checker Plated for Anti-Skid
- Top Mounted 6 Ton Anti Segregation Batchers
- Oil Heated Cones with:
- Electrical Heated Double Gate
- High Low Bindicators for Material Level
- Each Silo Equipped with:
- Bottom Safety Gates
- Cone Bottoms Recently Rebuilt with:
- Ni-Hard Steel Wear Plates
- Cones Recently Rebuilt with:
- AR Plate up to Silo Sides
- 96' x 42" Main Drag Slat Conveyor with:
- 125HP Motor
- Gear Reducer
- Not heated
- Drag Conveyor Rated at 600 TPH
- Material Reject Chute oil Heated on Sub-Floors
- Twin 4" Pitch Roller Chains
- Stairs with:
- Handrails on Both Sides of Drag Conveyor
- Top Platform for Maintenance
- Main Slat Conveyor had Recent Comlete Rebuild Including:
- Floor
- Idlers
- Head and Tail Sprockets along with Chains and Slats
- Twin Transfer Drag Conveyors with:
- 34" Wide Slats for Charging
- Overall condition, Excellent
- Package has been Disassembled
- Location: Western USA
View more Silos
Edward Spiral Concentrator ID: 1398365
Edward Spiral Concentrator
- Make: Edward
- Type: Spiral Concentrator
- Construction: Fiberglass
- Liner: Rubber Lined
- Turns: 10 Turns
- Turn Depth: 4in
- Inlets: 2 Inlets - 2in
- Outlets: 3 Outlets
- 1 @ 3.25in
- 2 @ 1.5in
- Overall Dimensions:
- Diameter: 24in
- Height: 130in
- Location: Savona, British Columbia, Canada
View More Spiral Concentrators
Leeson 1/4 hp Electric Motor ID: 143351
- 208-230/460V.
- 1725/1425 rpm.
- 3 phase.
- 50/60 Hz.
Please contact us for more information.
Manufacturer: | LEESON |
1999 Travco 8 Man Sleep Unit ID: 174230
- 12 ft. wide
- 65 ft. long
- New Beds
- New Bathroom
- New kitchen
- Air conditioner
- View more Buildings
Rosemount Exia Pressure Transmitter ID: 1071067
Type: C115-1DP33J12M1B1C6
Cal: 0-20 IN H20
Output: 4-20MA
Supply: 45VDC Max
Max W.P.: 2000PSIG
Canadian General Electric 1000 HP Motor ID: 305917
- Model: EN-138933
- Type: K
- Frame: 1332
- Volts: 4000
- Amp: 130
- RPM: 3570
- 60 Hz
- 3 Phase
- Location: Western Canada
View more Electric Motors
Caterpillar 740 Articulated Rock Truck ID: 148937
- CAT Articulated Rock Truck.
- Year: 2008.
- Model: 740.
- Hours: 10,800.
- Model: 740.
- Equipped with:
- Caterpillar C15 ACERT technology engine.
- 464 hp.
- 1,700 rpm.
- 6 cylinder.
- Turbocharged.
- 9 speed transmission.
- Forward gears: 7.
- Reverse gears: 2.
- Maximum speed: 34 mph (54.7 km/h).
- Dump & operational specs.
- Rated payload: 83,775 lbs / 38,000 kg.
- Capacity:
- Struck: 22.8 yd³.
- Heaped: 30 yd³.
- Tire size: 29.6R25.
- Caterpillar C15 ACERT technology engine.
- Please see the specs tab below for more detailed information.
- Year: 2008.
- Shipping information:
- Dimenisions (L x W x H):
- 35.7 ft x 11.3 ft. x 12.3 ft.
- 10.88 m x 3.44 m x 3.75 m.
- Weight:
- 72,400 lbs / 32,840 kg.
- Dimenisions (L x W x H):
Please contact us for more information.
ITE (BlueLine) 2 Pole 40 Amp Push-in Breaker ID: 166308
- 120-240 VAC
- 2 Pole
- Push-in
- Quantity 4
View More 40 Amp Breakers
Ore Kinetics CoronaStat Electrostatic Separator ID: 1408121
Ore Kinetics CoronaStat Electrostatic Separator
- Make: Ore Kinetics
- Type: Electrostatic Separator
- Model: CS-LAB-1
- Condition: Used
- Voltage: 30kV
- Feed Hopper:
- Length: 3in
- Width: 4.5in
- Depth: 7in
- Drum:
- Diameter: 12in Dia.
- Width: 8in
- Drive: 0.37kW Gearhead Motor
- Commander SE Vari-speed Controller
- Adjustable Separation
- 5 Collection Drawers/Trays
- Ore Kinetics Electrical Control Panel
- Overall Dimensions:
- Length: 2.5ft
- Width: 2ft
- Height: 4ft
- Location: Savona, British Columbia, Canada
View More Laboratory Equipment
Allen Bradley 550 Volt Size 1 Coil ID: 176671
- 550 VAC @ 60 Hz
- Cat #: 71A16
- Quantity 1
View More Size 1 Coils
Manufacturer: | ALLEN BRADLEY |
3000 Gallon Stainless Steel Tanks ID: 393132
- Capacity: 3000 Gallon
- Length: 120 in.
- Internal Diameter: 87 in.
- Height: 10 ft.
- Heat Insulated
- 1 Unit Available
- Location: Eastern Canada
View more Steel Tanks
Caloritech 30kW Forced Air Heater ID: 119915
- Caloritech 30 kW Forced Air Heater.
- 10 available.
- Model: GE30A5CM.
- 102360 BTU/hr.
- 1500 cfm.
- 43 m³/minute.
- 600V, 3 phase.
- Model: GE30A5CM.
- 10 available.
- Shipping information:
- Dimensions (L x W x H):
- 22 in. x 24 in. x 20 in.
- 56 cm x 61 cm x 51 cm.
- Weight:
- 100 lbs / 45 kg.
- Dimensions (L x W x H):
Please contact us for more information
View More Industrial Heaters
General Electric 600 Volt 8000 Line MCC Section ID: 156964
- 600A vertical.
- 600A horizontal.
- Bucket 1:
- GE size 3 starter - 120 coil.
- Overload: 123F467B.
- GE 100A breaker - adjustable trip.
- Bucket 2 & 4:
- GE size 2 starter - 120 coil.
- Overload = C21.4B.
- 100VA control transformer - 600/120V.
- GE 50A breaker - adjustable trip.
- Buckets 3:
- GE size 1 starter - 120 coil.
- Overload: C6.30A.
- 100VA control transformer - 600/120V.
- GE 7A breaker - adjustable trip.
- Bucket 5:
- GE size 1 starter - 120 coil.
- Overload: C1.96A.
- 100VA control transformer - 600/120V.
- GE 7 amp breaker - adjustable trip.
- Dimensions (Single section) L x W x H:
- 20 in. x 20 in. x 94 in.
- 51 cm x 51 cm x 239 cm.
Please contact us for more information
View our full inventory of MCC Sections.
Manufacturer: | GENERAL ELECTRIC |
Electrical MCC Panels - please inquire with your needs. ID: 45958
- Electrical MCC Panels -
- Please inquire with your needs
- Custom built MCC panels to meet your project requirements
2000 Monaco Executive Coach. ID: 44480
- 2000 Monaco Executive Coach.
- 42 ft. Long.
- 78,000 KM.
- 500 HP Cummins Turbo Diesel.
- Allison 6 Speed Electric Shift Transmission.
- 10,000 Watt Generator.
- New Batteries.
- New Front Tires.
- New Front Air Conditioning.
- Complete with Blue Ox Tow Package and 2008 Chevy HHR Wagon.
General Electric 3 Pole 125 Amp Breaker ID: 162947
- 600 VAC
- 3 Phase
- Quantity 1
View More 125 Amp Breakers
Manufacturer: | GENERAL ELECTRIC |
Caterpillar 1600 kW 600 Volt Diesel Generator ID: 892445
- Model: 3516-DITA
- 1600 kW Primer Power
- 2000 kVA
- 600 Volt
- 60 Hz
- +/- 3000 hrs
- Complete with Muffler
- Location: Eastern Canada
View more Diesel Generators
Durcometer Chemical Pump ID: 144235
- Durcometer Chemical Pump.
- Feed: A.
- Material Code: PAC11CA1.
- 1 - 1.4 in. plunger.
- Max. 25 GPH.
- 260 PSIG.
- Equipped with:
- Electric motor.
- 208-230V.
- 1,750/1,425 rpm.
- 3 phase.
- Electric motor.
Please contact us for more information.
Westinghouse 3 Pole 125 Amp Panel Main Breaker ID: 191859
- 240 VAC Max
- 3 Pole
- Cat #: CA3125X
- Quantity 1
View More 3 Pole 125 Amp Breakers
Manufacturer: | WESTINGHOUSE |
2008 Zinex A5 Truck-Mounted Diamond Drill ID: 1338990
2008 Zinex A5 Truck-Mounted Diamond Drill
- Make: Zinex
- Model: A5
- Type: Diamond Core Drill
- Year: 2008
- Hours: Approx. 6,000 Hours on Rig Since New
- Condition: Used, Reported in Good Condition. Recently Drilled 3,300 Meters NQ
- Mounted on Freight Liner Diesel Truck
- Fright-Liner has 237,000 Miles
- Engine: 5.9 Liter Cummins Diesel
- Drill Engine: CAT 6.6 ACERT Tier 4 Engine:
- Rated 174 HP Computer Controlled, Variable HP
- Includes:
- 12HH Chuck
- H and H Chuck Jaws
- Drill Comes with a Pratazolli Model KF40 High Pressure Injection Pump
- 40GPM/1,100PSI
- Rig is Equipped with a Slide Angle Mast to Drill from Vertical to Horizontal
- Comes with Tripping Auxiliary Winch to Handle Drill Head, High Speed Wireline Winch
- Drill Rod Tripping Done with Hydraulic Pullback Drill Head
- Compact Water Swivel
- Two Spare New Hydraulic Motors
- (One Each for Wireline Hoist and Pratazoli Water Pump)
- Skid Mount for Zinex A5 Available
- Spares & Parts:
- Guide Bushings for N and H Rod
- Added Safety Railing
- Hydraulic Filters
- Engine Oil Filters
- Rebuilt Kits for Chucks and Rod Holders
- Mast Roller
- Spare Chain and Sprockets for Wire Line
- Miscellaneous Parts
- Location: Savona, British Columbia, Canada
View More Diamond Core Drills
Paul O. Abbe 3 ft. x 8 ft. Ball Mill ID: 226939
- Carbon steel construction.
- 36 in. diameter.
- 96 in. long jacketed chamber.
- Internal lifter bars.
- Jacket rate 14 psi with rotary union.
- Outboard roller bearings.
- 20 hp motor.
- Volts: 230/460.
- RPM: 1755.
- Belt driven through Falk gear reducer.
- Ratio: 25.4:1
- Location: Eastern, U.S.A.
- Contact for more information.
View more Batch Mills
Manufacturer: | PAUL O. ABBE |
HBR 609 Drilling Rig ID: 207643
- Engine Power: 190 kW.
- Width of crawler: 2480 mm. / 8.14 ft.
- Mast:
- Stroke of rotary head: 4950 mm / 16.24 ft.
- Extraction force: 100 kN.
- Crowd force: 100 kN.
- Clamps:
- Diameters: 68 ÷ 254 mm / 2.7 in. ÷ 10 in.
- Rotary Head:
- Torque: 6,3 kNm / 4646.6 lbf.ft.
- Speed range: 80 rpm.
- Weight: 22000 kg / 48502 lbs.
View more Air Track Drills
Manufacturer: | HÜTTE BOHRTECHNIK |
2014 Caterpillar 242D Skid Steer ID: 236706
- OROPS
- Single Speed
- Proportional Standard Flow Hydraulics
- Hours: 1957
- Location: Southern USA
View more Skid Steers