Equipment Quotes
Minearc Systems Rescue Shelter Package ID: 440254
- 4.8m L x 1.9m W x 2m H
- 5 Units Available
View more Safety Equipment
400kW Cat Diesel Generator ID: 1287784
400kW Cat Diesel Generator
- Make: Caterpillar
- Model: C13 Engine
- Duty: Continuous
- Condition: New, Never Used
- Portable/Stationary: Portable, Skid-Mounted
- Engine: Cat C13
- Hours: 0 Hours
- Oil: API CJ-4, Capacity - 34 Liters (9 Gal)
- Radiator: Air-to Air, Charge Air Cooled, Capacity - 34 Liters (12 Gal)
- Generator: Stamford UCI224C1
- kVA/kW: 400kW (500VA)
- RPM: 1800
- Voltage: 480 Volt
- Amperage: 602 Amps
- Frequency: 60Hz
- Phase: 3-Phase
- Control Panel: CAT EMCP 4.2
- Location: Northwestern Canada
View More 301-400kW Diesel Generators
Square D Size 5 Magnetic Coil ID: 992574
Square D magnetic coil
Size 5
Type 31096-400-09
260va max
120 vac @ 60hz
110 vac @ 50hz
Kohler 300kW Diesel Generator ID: 1138363
Kohler 300kW Diesel Generator
- Make: Kohler
- Model: 300REOZD
- Stationary/Portable: Stationary
- Year: 2000
- Hours: 421
- Condition: Used
- Service Duty: Standby
- Engine: Detroit Diesel Series 60 (490HP@1800RPM)
- Hours: 421
- Oil: 36L Capacity
- Radiator: Standard Air to Air
- Generator: 4UA13
- kVA/kW: 375kVA/300kW
- Voltage: 277/480V
- Amperage: 451A
- RPM: 1800 RPM
- Overall Dimensions:
- Length: 135" (Approx.)
- Width: 56" (Approx.)
- Height: 118" (Approx.)
- Weight: 14,500 Lbs
- Additional Information:
- Weatherproof Enclosure
- 555 Gallon Double Wall Base Fuel Tank
- Location: USA
View More Diesel 300-400kW Generators
Used Eimco Piston Air Motor. Model:200 ID: 41824
- Eimco Piston Air Motor.
- Model: 200
- 5 cylinder
- Rated at 10 HP
- 90 PSI.
- 1100 RPM.
- Reversible.
Rapid G400-6CK Granulator ID: 1382467
Rapid G400-6CK Granulator
- Make: Rapid
- Model: G400-6CK
- Year: 2007
- Condition: Used, Reported in Good Condition
- 5 Rotor Blades
- 2 Bed Knives
- Drive: Electric Motor
- Power Output: 15HP
- Voltage: 480 Volt
- Current: 18 Amps Full Load
- Frequency: 60Hz
- Phase: 3-Phase
- Location: Western Canada
View More Granulators
GE 175 kVA Drive Isolation Transformer ID: 187953
- No: 9T23B4011G22.
- Primary Voltage: 460.
- Secondary Voltage: 460Y/266.
- Ph: 3.
- Hz: 60.
- Enclosure: Type 2 Rainproof.
View more 175 kVA Transformers
Bruks 602 CS Wood Chipper ID: 1393326
Bruks 602 CS Wood Chipper
- Make: Bruks
- Model: 602 CS
- Serial: 94 42030
- Would require approx. a 60hp (45KW) motor.
- Condition: Used, Reported in Good Condition
- Gravity Feed
- Feed Opening: 22in Wide x 16in High
- Discharge: 22in Wide x 16in High - Grated with 2in x 2in Openings
- 22in Wide Rotor - Spins Freely
- Dual Blade
- 4-Groove Flywheel - 18.75in Diameter
- Foot Print: 33in Long x 31.5in Wide
- With Telemecanique XCK-J Limit Switches
- With Extra Blades - 22in Wide
- (3) 5.5in Long
- (4) 6.75in Long
- Overall Dimensions:
- Length: 47in
- Width: 36in
- Height: 61.5in
- Location: Savona, British Columbia, Canada
View More Sawmill Equipment
Cutler Hammer MCC Section. 480 Volt. 600 Amp Vertical and Horizontal Boss ID: 44569
Cutler Hammer MCC Section. 480 Volt. 600 Amp Vertical and Horizontal Boss
Denver Duplex Mineral Jig ID: 1401227
Denver Duplex Mineral Jig
- Make: Denver
- Type: Duplex Mineral Jig
- Size: 24in x 36in
- Condition: Used, Reported in Good Condition
- Mill Capacity per 24 Hours: 400-800 Tons
- Solution: Water or Cyanide
- GPM: 35-55
- Tons/24 Hours: 210-330
- Bedding Material: 225 Lbs. Required
- Drive: 10HP Electric Motor
- Location: Southwest USA
View More Mineral Jigs
Caterpillar C32 Marine Engines ID: 1424478
Caterpillar C32 Marine Engines
Quantity: 4 Units Available
- Make: Caterpillar
- Model: C32
- Type: Diesel Marine Engine
- Year:
- Units 1 & 2: 2010
- Unit 3: 2012
- Unit 4: 2013
- Hours:
- Units 1 & 2: 10,500 Hours
- Unit 3: 8,500 Hours
- Unit 4: 8,000
- Condition: Used Condition
- Power Output:
- Units 1, 3 & 4: 1,450HP
- Unit 2: 1,702HP
- Rotation Speed: 2,300RPM
- Emissions Tier:
- Units 1 & 2: T1
- Units 3 & 4: T2
- Gearbox:
- Model: ZF 3050
- Ratio: 1.5:1
- Location: Middle East
View More Marine Engines
Pennsylvania Crusher JRT-1 Hammer Mill ID: 1263316
Pennsylvania Crusher JRT-1 Hammer Mill
- Make: Pennsylvania Crusher Corp.
- Model: Non-Reversible Hammer Mill
- Size/Type: JRT-1
- Serial: 7334
- Rated Capacity: 15 STPH @ 6mm Screen
- Left Hand Assembly
- Feed Size: 125mm
- Product Size: 95% Minus 6mm
- Screen Bars: 19mm (0.75in)
- Hammer Type: Paddle Hammers
- # of Hammers: 12 Total
- Hammer Rows: 4 Rows
- Hammers Per Row: 3 Hammers
- Drive: Electric Motor
- Power Output: 30HP
- RPM: 1765
- Voltage: 575 Volt
- Type: V-Belt Drive
- Location: Eastern Canada
View More Hammer Mills
50kVA Delta EVI Transformer ID: 1202436
50kVA Delta EVI Transformer
- Make: Delta
- Model: CD1A0050HRA6XXLD
- Serial: DRF-0118-179597
- kVA: 50kVA
- Type: Dry
- Phase: 1-Phase
- Frequency: 60Hz
- Primary Voltage: 208 Volt
- Secondary Voltage: 240/480 Volt
- Enclosure: NEMA 3R
- Overall Dimensions:
- Width: 23in
- Depth: 26in
- Height: 36in
- Weight: 387 Lbs. (176 kg)
- Location: Savona, British Columbia, Canada
View More Dry Type Transformers
ATC 30 Second Timer ID: 1070902
Type: 305D007A10PC
120V 60Hz
30 Second Timer
10A@120VAC
MBMM 5 TPH Ore Hopper/Feeder Module ID: 1416915
MBMM 5 TPH Ore Hopper/Feeder Module
- Make: Mount Baker Mining and Metals (MBMM)
- Model: Fine Ore Hopper Feeder Module
- Condition: Used, Reported in Good Condition
- Capacity: 5 TPH
- Vibrating Pan Mounted Under Hopper
- All Mounted to Common Steel Frame
- Location: Central USA
View More Vibrating Pan Feeders
Toshiba 15 HP Motor ID: 234167
- HP: 15
- Volts: 230/460
- RPM: 1770
- Frame: 254TC
- Hertz: 60/50
- Location: British Columbia
View more Motors
Manufacturer: | TOSHIBA |
Trio CRP36 Self Cleaning Permanent Magnet ID: 817537
- Model: CRP36
- 36 in. x 42 in. Magnet with
- Solid Steel Core
- Heavy Steel Side Plates
- 3 HP Electric Motor
- Shaft Mount Reducer
- V-Belt Drive and Drive Guard
- Stainless Steel Armor Clad Belting
- 2 Pulley Design with
- Rubber Lagged Drive Pulley
- Screw Take-Up Assemblies
- Suspension Lugs
- Location: Western Canada
View more Belt Magnets
37.5 KVA 600-120/240 Volt. Single Phase Westinghouse Transformer For Sale ID: 45054
- 37.5 KVA Westinghouse
- 600-120/240 Volt.
- Single Phase.
- Indoor Dry.
Grove Gear Reducer Package ID: 144285
- Grove Right Angle Gear Reducer Package.
- 2 available.
- Consists of:
- Grove Right Angle Gear Reducer.
- Model: BM232-3.
- Ratio: 30:1.
- Model: BM232-3.
- Baldor Electric Motor.
- 2 hp.
- 230/460V.
- 1,725 rpm.
- 3 phase.
- 60 Hz.
- Frame: 145TC.
- 2 hp.
- Grove Right Angle Gear Reducer.
- Consists of:
- 2 available.
Please contact us for more information.
MMD 500 Series Sizer ID: 1391494
MMD 500 Series Sizer
- Make: Mining Machinery Developments (MMD)
- Series: 500 Series
- Model: S154 500mm Shaft Centers
- Year: 1985
- Condition: Used, Reported in Good Condition
- Drives: Twin 110kW Motors
- Output: 110kW
- RPM: 1480
- Voltage: 415 Volts
- Frequency: 50Hz
- Frame: D280MD
- Dimensions: (Approx.)
- Length: 3,190mm
- Width: 1,870mm
- Height: 615mm
- Weight: 12 Tons
- Location: Europe
View More Roll Crushers
Ecopolymer ES15.2 Shredder Shark ID: 410794
- Model: ES15.2
- Hopper Opening: 1500mm
- Hopper VolumeL 2.3m³
- Lenght of Rotor: 1500mm
- Rotor Diameter: 368mm
- Motor Power: 55 kW
- Hydraulic Coupling: 1 Unit
- Rotor Speed U/min
- Cutting System: 76 Knives (40x40mm)
- Screen: 25 - 100mm
- Voltage: 400
- 50 Hz
- 3 Phase
- Connection Diameter: 250mm
- Stand: 1 Unit (H: 500mm)
- Dimensions
- L: 3000mm
- W: 2300 mm
- H: 2128mm
- Weight: 4500 kg
- Location: Europe
View more Shredders
400 Gallon Stainless Steel Tank ID: 1343632
400 Gallon Stainless Steel Tank
- Make: Accent
- Model: ST-400G
- Serial: 2005-223
- Capacity: 400 US Gallons
- Type: Stainless Steel
- Fittings: Multiple 2.5in Diameter Fittings
- Discharge: 2.5in Diameter Discharge
- Tank Dimensions: 40in Diameter x 60in High
- Overall Dimensions: 44in Diameter x 84in High
- Location: Savona, British Columbia, Canada
View More Steel Tanks
OTA Iron Works Lab Flotation Test Machine ID: 909060
- Type: M.S
- Motor 200 W
- 100 Volt
- 3500 - 3000 RPM
- Location: British Columbia, Canada
View more Laboratory Flotation Machine
Kolman 101 Portable Screening Plant ID: 495326
- Self-Supported 10 Yard Feed Hopper
- 21 in. Wide Adjustable Discharge Gate.
- 24 in. Wide X 5 ft. Long Plate Feeder C/W 3/8 in. Wear Plate.
- Chain Driven Off Conveyor Tail Pulley.
- 30 in. X 50 ft. Long Screen Feed Conveyor.
- 24 in. Deep Covered Truss Frame.
- 16 in. Plain Steel Head Pulley.
- 15 in. Self Cleaning Tail Pulley.
- 5 in. Dia. - 20° Idlers On 4.5 ft. Spacing.
- 3 Ply Belting, 1/8 in. Top, 1/32 in. Back.
- Chain Driven By a 20 HP Reliance Electric Motor 220/440 Volt.
- Kolman Model DC 90-54 - 2 Deck Wash Screen.
- 4.5 ft. Wide X 9 ft. Long.
- Belt Driven By a 7.5 hp motor.
- Top Deck - 7/8 in. Cloth C/W 5 Spray Bars (With Flow Control Valve).
- Bottom Deck - 1/4 in. Cloth C/W 4 Spray Bars (With Flow Control Valve).
- Fully Enclosed Fines Unders Hopper With 2 – 10 in. Dia. Discharge Spouts.
- 5 ft. Wide X 6 ft. Long Overs End discharge chute.
- Overhead Extended Screen support.
- All On Single Axle Dual Wheel Chassis.
- 8.25 – 20 Tires.
- Manual Raise.
- Location: Western Canada
View more Portable Screens
100 HP Crown Triton Electric Motor ID: 52341
- 575V.
- 1,755 rpm.
- 3 phase.
- Frame: 405T.
- TEFC.
Please contact us for more information.
Rivulis 6 in. Lay Flat Hose ID: 967886
- Max Pressure Rating: 45 - 50 PSI
- ID: 6.10 in.
- Wall: 0.007 in.
- Length: 300 ft.
- Weight: 255 lbs. Per 300 ft. Roll
- Approx. 60 Rolls Available
- Condition: New Unopened
- Location: Eastern USA
View more Hose
Douglas 24 in. Permanent Cross Belt Magnet ID: 227995
- 24 in. belt width
- 7 ft. overall length
- Dual voltage motor (230/480 Volt.)
- Heavy duty unit.
- Located: Southern USA
- Contact for more information.
View more Belt Magnets
2012 Huette HBR 502-2 Mini-Piling Rig ID: 218007
- Operating Hours: 3,014.
- Undercarriage:
- 1900 mm wide (74.8 inches).
- 400 mm tracks (15.75 inches).
- Mast: 5000 mm long (196.85 inches).
- Rotary head stroke: 3350 mm (131.99 inches).
- Cummins 82 kW engine.
- Model: QSB4.5.
- Winch: 2 tons capacity.
- Location: Europe.
View more Quarry Drills
Manufacturer: | HUETTE |
2012 Sandvik LH517 Scooptram ID: 1388558
2012 Sandvik LH517 Scooptram
- Make: Sandvik
- Model: LH517
- Type: Scooptram
- Year: 2012
- Condition: Used, Reported in Good Condition
- Hours: 12,881
- Tramming Capacity: 17,200 kg (37,920 Lbs.)
- Break Out Force:
- Lift: 35,000 kg (77,162 Lbs.)
- Tilt: 29,450 kg (64,926 Lbs.)
- Tipping Load: 35,500 kg (78,264 Lbs.)
- Bucket: 112in
- Joystick Steering
- Detroit Diesel Engine
- Enclosed Cab
- Air Conditioning
- Ansul Fire Suppression
- See Below for Attached Spec Sheets and Dimensions
- Location: South America
View More Scooptrams
Auto-Jet 54 in. x 9 ft. 6 in. Pressure Filter ID: 81648
- 54 in. dia. shell x 9 ft. 6 in. long.
- Shell/internal material in 3/16 in. stainless steel.
- 27 leaves, 47 in. dia. x 1/2 in. thick.
- Spray bars on top inside of tank.
- 103 in. long x 64 in. mild steel bottom support stand.
- 54 in. dia. hinged door with hand wheel lock and 12 lever actuated lock bars.
- Chain driven by motor/reducer unit.
ZX ZWY-80 Excavation Loader ID: 959530
- Model: ZWY-80
- Load Capacity: 80 m³/h
- Can use Diesel or Electric
- ZS1125 Diesel Engine
- 1.5 Liter
- 18.5 kW Electric Motor
- 380/660 Volt
- 3 Phase
- 50 Hz
- Location: South America
View more Portable Excavators
4in x 3in Gravel Pump ID: 1287871
4in x 3in Gravel Pump
- Type: Slurry Pump
- Suction: 4in
- Discharge: 3in
- Rubber Impeller
- Rubber Lined
- With Starter Box
- Drive: Electric Motor
- Power Output: 15kW
- Speed: 1460 RPM
- Voltage: 330/660 Volt
- Frequency: 50Hz
- Phase: 3-Phase
- DOM: 10/2021
View More Slurry Pumps
Eagle 42 in. x 32 ft. Sandscrew ID: 478189
- Size: 42 in. x 32 ft.
- Manufacture: Eagle Iron Works
- Location: Western Canada
View more Sandscrews
2011 YSR 330 Shear ID: 322918
- Excavator Weight: 44,000 - 80,000 lbs
- Cutting Force Jaw Center: 617,000 lbs
- Jaw Opening: 24 in.
- Location: Eastern USA
View more Excavator Attachments