Equipment Quotes
Humphreys 24A Spirals ID: 47125
- Bank of 3.
- Cast steel.
- Unit is in very good condition.
General Electric 30 HP Motor ID: 175124
- 480V.
- 885 rpm.
- Frame: 364T.
- 45 A.
- TEFC enclosure.
View More 30 HP Electric Motors
Manufacturer: | GENERAL ELECTRIC |
SALA 1.5in. Vertical Tank Pump ID: 295490
- Type: SPV 180-1 1/2
- 1.5 in. Discharge
- Rubber Lined Bowl
- Vertical motor base
- Belt guard
- Location: Western Canada
View more Vertical Tank Pumps
Skyway Electric 45 kVA Transformer ID: 88866
- High voltage: 480.
- Low voltage: 440y/254 volt.
- Three phase.
- 500 lbs.
Manufacturer: | Skyway Electric |
Gardner Denver RB83 Stoper Drills ID: 45159
Gardner Denver Stoper Drills
- Model: RB83
- Complete with Steel Retainer
- 7/8" Chuck
- Standard Feed Leg
- Air Consumption: Approx. 180 CFM @ 90 PSI
Qty. 20
Located in Savona BC, Canada.
View More Stoper Drills
2014 Komatsu WA470-7 Wheel Loader ID: 218668
-
- Net Horsepower: 272 HP @ 2000 rpm.
- Operating weight: 52,889-53,308 lbs.
- Bucket Capacity:
- 5.0-5.75 yd3
- 3.8-4.4 m3.
- Large capacity torque converter:
- 8% lower fuel consumption.
- Lock-up in 2nd, 3rd, and 4th
- Komatsu SAA6D125E-6 engine.
- EPA Tier 4 Interim certified.
- Fully enclosed cab.
- Operator seat with EPC (electronic pilot control) levers.
- Rearview monitoring system.
- Remote boom and bucket positioners.
- Can set kick-outs from inside the cab.
- Variable displacement piston pumps with CLSS.
- Komatsu auto idle shutdown.
- Located: Eastern U.S.A.
- Contact for additional details.
View more Wheel Loaders
Manufacturer: | KOMATSU |
Garlock 72 ft. x 18 in. Portable Conveyor ID: 447183
- Corrugated Belt
- Wear Strips Installed to Protect the Belt
- Units well Maintained
- Complete with
- Onan Engine
- Drums
- Rollers
- Lights
- Switches
- Hoses
- Cylinders
- Brakes
- Location: Eastern USA
View more Portable Conveyors
MBMM 12 in. x 12 ft. Screw Classifier ID: 635285
- Condition: New Surplus – Unused
- Screw Diameter: 12 in.
- Length: 12 ft.
- Includes TEFC Electric Motor
- Robust Construction
- All Bearings out of the slurry
- Dual purpose as a dewatering screw
- Inclined to elevate heavier material to an elevated discharge point.
- Located: Western USA
View more Classifiers and Sandscrews
Eriez SE-7930 Suspended Electromagnet ID: 1228445
Eriez SE-7930 Suspended Electromagnet
- Make: Eriez
- Model: MC-2, SE-7930
- Style: 9944745
- Type: Suspended
- Voltage: 230 Volts
- Amperage: 53.3 Amps
- Watts: 14,811W
- Frequency: DC
- Includes Controller
- Manual Cleaning
- Box Dimensions:
- Length: 72in
- Width: 72in
- Height: 37in
- Location: Western Canada
View More Magnets
New York 2610 High Pressure Blower ID: 1097723
New York 2610 High Pressure Blower
- Wheel Size & Type
- 2610 Open
- Dimensions: 26" Diameter x 4" Wide
- Inlet
- 8" Diameter
- 8 Bolt Flange
- Outlet
- 10" Diameter
- 8 Bolt Flange
- Motor
- WEG TEFC 3 Phase
- 20 HP
- 480 Volts
- 2935 RPM
- Location: British Columbia, Canada
View More High Pressure Blowers
3000kVA Eaton Distribution Transformer ID: 1424540
3000kVA Eaton Distribution Transformer
- Make: Eaton Cooper Power Series
- Category: 0000CA70F8YS
- Year: 2020
- Condition: Unused - Placed on Pad, Never Connected
- Type: Distribution Transformer
- Style: Liquid Filled
- Fluid: Envirotemp™ FR3™
- Gallons: 660 Gal
- High Voltage: 24,940 Volts
- High Voltage Current: 69.4 Amps
- Low Voltage: 600Y/347 Volts
- Low Voltage Current: 2,890 Amps
- Frequency: 60Hz
- Phase: 3-Phase
- Weight: 17,910 Lbs.
- Location: Western Canada
View More Distribution Transformers
Proline 6 in. Dredge Package ID: 385930
- Engines: 2 x 9 HP Honda
- Pumps: 2 x 500 HPs
- Sluice Box: 22 in. x 72 in.
- Dredge Hose: 6 in. x 20 ft.
- Pressure Hose: Two 2 in. x 90 in.
- Intake Hose: Two 3 in. x 48 in.
- Flotation: 4 Polyethylene Floats
- 16 in. x 62 in. x 100 in.
- Capacity: Up to 20 Cubic Yards Per Hour
- Location: Western Canada
View more Dredges
6ft Dia. x 16ft Storage Silos ID: 1353322
6ft Dia. x 16ft Storage Silos
Quantity: 3 Units
- Capacity: 493ft³ (Approx.)
- Condition: Unused Condition - Never Held Material
- Year: 2015 Approx.
- Diameter: 6ft
- Height: 16ft
- Cone: 4ft Cone Section
- Discharge: 6in Discharge
- Construction: 0.25in Plate (¼ inch) Carbon Steel
- Painted Inside and Outside
- Location: Western Canada
View More Silos
Edem 18 in. x 30 ft. Vibrating Conveyor ID: 728340
- 18 in. wide x 30 ft. long.
- 11 in. high sides.
- Mounted on steel beam frame.
- 7.5 hp electric motor.
- 575 volt, 1740 rpm.
- Fibreglass section for metal detector.
- With Rens A10-36 Metal detector.
View more Vibrating Conveyors
Sylvania 1 Pole 15 Amp Breaker ID: 335595
- 1 Pole
- Amp: 15
- Volt: 120/240
- Style: Bolt On
- Type: CB
- Single Phase
- Location: British Columbia, Canada
View more Breakers
Horizontal 3000 hp Synchronous Electric Motor ID: 144363
- 4,000V.
- 360 rpm.
- 3 phase.
- 60 Hz.
- Frame: 20U7220.
- Class I GR B&D Div. II.
- Stored indoors.
Please contact us for more information.
Taylor Dynamometer Pump Control Panel ID: 1404274
Taylor Dynamometer Pump Control Panel
- Make: Taylor Dynamometer
- Model: 0710-F11030
- Serial: 1021-0097WR
- Year: 5/24/2010
- Condition: Used Condition
- Voltage: 480 Volts
- Current: 225 Amps
- Frequency: 60Hz
- Phase: 3-Phase
- HP/kW: 115HP (85.7kW)
- Enclosure Type: 12
- Siemens Size 2 and 3 Magnetic Contactors
- Siemens FD63F250 3-Pole Breaker with 225 Amp Adjustable Trip
- NEMA 3R Enclosure with Breaker Disconnect Handle
- Overall Dimensions:
- Length: 40in
- Width: 24in
- Depth: 12in
- Location: Savona, British Columbia, Canada
View More Control Panels
Delta 112.5 kVA 4160 - 600V Transformer ID: 110885
- Delta 112.5 kVA Transformer.
- 4160V.
- 600Y/347.
- 60 Hz.
- 3 Phase.
- Please contact us for more information.
Manufacturer: | Delta |
GPM SBLH4S15-6T5 Submersible Slurry Pump ID: 1422380
GPM SBLH4S15-6T5 Submersible Slurry Pump
- Make: GPM
- Model: SBLH4S15-6T5
- Condition: Used Condition
- Flow Rate: 300GPM
- Head: 40ft
- Discharge: 4in Diameter
- Suction: 6in Diameter
- Impeller Style: Semi-Open
- Power Output: 15HP (11kW)
- Rotation Speed: 1,200RPM
- Voltage: 575 Volts
- Current: 17 Amps
- Frequency: 60Hz
- Phase: 3-Phase
- Pole: 6
- Location: Western Canada
View More Submersible Pumps
7.5 HP Dry Rotary Vacuum Pump ID: 971335
- Model: M 1124
- HP: 7.5
- CFM: 50
- 1800 RPM
- Voltage: 480 Volt
- 3 Phase
- Location: Western, Canada
View more Vacuum Pumps
78in Wide x 240in Long Vibrating Pan Feeder ID: 1401026
78in Wide x 240in Long Vibrating Pan Feeder
- Size: 78in Wide x 24in Long
- Condition: Used, Reported in Good Condition
- Mounted to I-Beam Frame
- Drive: Electric Motor
- Make: Toshiba
- Power Output: 20HP
- Voltage: 575 Volt
- Frequency: 60Hz
- Location: Central Canada
View More Vibrating Pan Feeders
Beaver 15 kVA Isolation Transformer ID: 147007
- Beaver 15 kVA Isolation Transformer.
- High voltage: 480 Delta.
- Low voltage: 208Y/120V.
- 3 phase.
- 60 Hz.
- Type 2 enclosure.
- Shipping information.
- Dimensions (L x W x H):
- 14 in. x 20 in. x 18 in.
- 36 cm x 51 cm x 46 cm.
- Weight:
- 200 lbs / 91 kg.
- Dimensions (L x W x H):
Please contact us for more information.
13 ft. Bucket Elevator ID: 563295
- Length Distance Between Inlet & Discharge: 13 ft.
- Enclosure Width: 14 in.
- Type: Chain
- Inlet Dimensions: 15 in. x 26 in.
- Discharge Dimensions: 12 in. x 15 in.
- Base to Center of Inlet: 4 ft. 3 in.
- Base of Center of Discharge: 16 ft. 8 in.
- Bucket Size and Makeup: 8 in. x 6 in. Steel
- Bucket Spacing: 11 in.
- Drive: Leeson Wattsaver
- 5 hp
- 208-230/460 Volt
- 1755 RPM
- Reduction: Dodge
- Size: TXT2A
- Overall Dimensions:
- 7 ft. x 34 in. Wide
- Location: British Columbia, Canada
View more Bucket Elevators