Quotes

Wanted Equipment Sell Your Equipment Financing - Apply now

Equipment Quotes

Kason 60in Stainless Steel 2-Deck Circular Screen ID: 1400348

Kason 60in Stainless Steel 2-Deck Circular Screen

Make: Kason Corporation
Model: K-60-2-SS
Type: Vibrating Screen Separator
Condition: Used, Reported in Good Condition
- <200hrs of Operation Since its Last Major Maintenance Refresh
- Maintenance Refresh Included: Replacement of All Threaded Parts
Decks: 2-Decks
Construction: Stainless Steel Contact Parts
Carbon Steel Base with Floor Flange for Mounting
Drive: Electric Motor
- Power Output: 2.5HP
- Voltage: 230/460 Volt
- Frequency: 60Hz
- Phase: 3-Phase
Location: Eastern USA

View More Circular Screens

View details Remove

Tamrock EJC 210 6-Yard Scooptram ID: 1377017

Tamrock EJC 210 6-Yard Scooptram

Make: Tamrock
Model: EJC 210
Type: Scooptram
Capacity: 6.0 Yards (4.6m³)
Payload: 9,500 Kg (21,000 Lbs.)
Condition: Used, Reported in Good Condition
Diesel Engine: Detroit S50
Brake System: LCB
Powertrain: Clark
Electrical System: 24 Volt
Tires: 17.5-25

View Spec Sheet Below
General Model Specifications:
- Capacities:
  - Tramming Capacity: 9,525 kg (21,000 lbs.)
  - Breakout Force, Lift: 97 kN (9,910 kg) (21,850 lbf)
  - Break Out Force, Tilt: 143.5 kN (14,628 kg) (32,250 lbs.)
  - Tipping Load: 25,174 kg (55,500 lbs.)
  - Buckets: 3.8 - 5.3 m³ (5.0 - 7.0 yd³)
- Bucket Motion Times:
  - Raising Time: 5.5 sec.
  - Lowering Time: 4.0 sec.
  - Tipping Time: 5.0 sec
- Standard Engine:
  - Diesel Engine: Detroit Diesel Series 50 DDEC
  - Output: 186kW (250HP) @2,100 RPM
  - Torque: 1058 Nm (780 lbf-ft) @1,350 RPM
  - Number of Cylinders: Inline 4
  - Displacement: 8.5 L (519 in³)
  - Cooling System: Liquid Cooled
  - Combustion Principle: Turbocharged, Aftercooled, Direct Injected, 4-Cycle
  - Air Filtration: Donaldson, Dry Type
  - Electric System: 24 V
  - Exhaust System: ECS Catalytic Purifier with Silencer
- Standard Converter: Clark C5402, Single-Stage, Stall Torque Ratio: 3.14-1
  - Offset Ratio: 1.0-1
- Transmission: Clark 4421 4-Speed Forward and Reverse with Modulation
- Standard Axles:
  - Front Axle: Clark 19D2748, Posi-Torq Differential, Fixed
  - Rear Axle: Clark 19D2748 No-Spin Differential, Oscillating ± 10°
- Weights:
  - Operating Weight: 25,084 kg (55,300 lbs.)
  - Total Loaded Weight 34,609 kg (76,300 lbs.)
- Axle Weights without Load:
  - Front Axle: 10,070 kg (22,200 lbs.)
  - Rear Axle: 15,014 kg (33,100 lbs.)
- Axle Weights with Load:
  - Front Axle: 24,358 kg (53,700 lbs.)
  - Rear Axle: 10,251 kg (22,600 lbs.)
- Main Dimensions:
  - Total Length: 9,957mm (392in)
  - Width Without Bucket: 2,565mm (101in)
  - Max Width: 2,718mm (107in)
  - Height with Safety Canopy: 2,311mm (91in)
Location: Mexico