PinAAcle 500 Atomic Absorption Spectrometer ID: 1132006

PinAAcle 500 Atomic Absorption Spectrometer

• Make: PerkinElmer
• Model: PinAAcle 500
• Year: 2019
• Brand New, Never Used or Plugged in

System Design

• Monochromator
  • Littrow Design with Motorized Drive for Automatic Wavelength Selection and Peaking
  • Wavelength Range: 180-900 nm
  • Diffraction Grating: 1800 Lines/mm Blazed at 236 nm and 597 nm
  • Grating Area: 64mm x 72mm
  • Reciprocal Linear Dispersion: 1.6 nm/mm (Nominal)
  • Focal Length: 267mm
    
    
• Spectral Bandwidths: User Selectable Automatic Slit Widths of 0.2, 0.7 and 2.0 nm at Optimized Slit Height
  
  
• Automatic Lamp Selection
  • 4-Lamp Mount with Built-In Power Supplies for PerkinElmer Cable-Less Lumina™ Hollow Cathode(HCL) and Patented Electrodeless Discharge Lamps(EDL)
  • Computer-Controlled Lamp Selection and Alignment Via Syngistix Touch™
  • Lamp Elements and Recommended Operating Currents are Automatically Recognized and Set When Lumina HCLs and EDLs are used 
    
    
• Detector: Wide-Range Segmented Solid-State Detector, Including a Built-In Low-Noise CMOS Charge Amplifier Array
  
  
• Background Correction: Built-In Continuum Source Double-Beam Background Correction Using a High-Intensity Deuterium Arc Lamp
  
  
• Corrosion Resistance: All the PCBAs are Conformal Coated for Complete Resistance to Corrosion

Flame Atomizer

• Gas Controls: 
  • Fully Computer-Controlled with Oxidant and Fuel Monitoring
  • Touchscreen or Keyboard-Activated Remote Ignition System with Air/Acetylene
  • Acetylene Flow is Automatically Adjusted Prior to the Oxidant Change when Switching to or from Nitrous Oxide/Acetylene Operation
    
    
• Sample Introduction System
  • Modular Sample Introduction System Consisting of a Quick-Change Spray Chamber, Burner Head and Nebulizer.
  • The Introduction System is Equipped with a High-Strength Inert Mixing Chamber, Angled to Ensure Proper Drainage.
  • Choice of High-Sensitivity, Corrosion-Resistant, Plastic Nebulizer or Durable Stainless Steel Nebulizer.
  • The Standard Burner Head is All-Titanium, 10cm, Single-Slot for Air/Acetylene Operation.
    • Optional Burner Heads Include: 5cm Nitrous Oxide/Acetylene, 5cm Air/Acetylene, and 10cm 3-Slot Air/Acetylene.
  • The Flame Shield is Polymer-Coated for Resistance to Corrosion from Acidic Fumes from the Environment or From the Samples.
    
    
• Safety Functions:
  • Interlocks Prevent Ignition If:
    • Proper Burner Head, the Nebulizer/End Cap, or the Burner Drain System is Not Correctly Installed
    • Liquid Level in the Drain Vessel is Incorrect
    • Gas Pressures are Too Low
  • Interlocks Will Automatically Shut Down Burner Gases If:
    • Flame is Not Detected
    • Any of the Other Interlock Functions are Activated
      
      
• Control and Data System:
  • User Interface: The Standalone PinAAcle 500 AA Provides Complete Control Through an Innovative Touchscreen Interface with Syngistix Touch™ Software
  • Display: 15”, 26 Million Display Colors, TFT LCD with Embedded Resistive Touchscreen
  • Built-In Computer: The Touchscreen Interface Operates Via a On-Board Computer That Comes with Intel Core i3 3.3GHz with 4GB RAM and 2.5” SATA 64GB SSD
  • Data Handling: Instrument Readings Linear in Absorbance (-0.500 A to +2.000 A), Concentration, or Emission Intensity with Continuously Variable Scale Expansion from 0.01 to 100 Times.
    
    
• Physical Data
  • Dimensions: 
    • Length: 26" (67cm)
    • Width: 25" (63cm)
    • Height: 25" (63cm)
    • Weight: 126 Lbs (57kg)
  • Power: 100-230V (±10%), 50/60Hz (±1%), Single Phase Alternating Current, 800 VA (Max)
    
    
• Location: USA

View More Atomic Absorption Machines