Hagby 1000 Diamond Core Drill ID: 1403124

Hagby 1000 Diamond Core Drill

• Make: Hagby Bruk AB
• Model: Onram 1000
• Year: 1986
• Condition: Used, Reported in Good Condition
  
  
• General Model Specifications:
  • Depth Capacity:
    • N-Head:
      • WL 46mm: 1125m
      • AQ: 1000m
      • WL 56mm: 1000m
      • BQ: 850m
      • WL 66mm: 850m
      • NQ: 600m
      • WL 76mm: 700m
      • HQ: Not-Suited
    • H-Head:
      • WL 46mm: Not-Suited
      • AQ: Not-Suited
      • WL 56mm: 1000m
      • BQ: 850m
      • WL 66mm: 850m
      • NQ: 600m
      • WL 76mm: 700m
      • HQ: 400m
        
        
  • Feed Boom: 
    • Feed Length (Underground): 1,700mm (5ft 7in)
    • Total Length (Underground): 3,065mm (10ft)
    • Feeding Force: 46.1kN (10,350 lbs.)
    • Pulling Force: 60.8kN (13,650 lbs.)
    • Feed Rate, Drilling Max: 0.04 m/s (1.5in/s)
    • Feed Rate, Rod Running, Max 1.1 m/s (43in/s)
    • Practical Rod Running Speed: 20m/min (60ft/min)
      
      
  • Drill Head with Chuck
    • Drive Spindle Inner Diameter: 77mm (3in)
    • Torque:
      • High Gear:
        • 178Nm at 1,600 RPM (137 lbf-ft)
        • 550Nm at 565 RPM (427 lbf-ft)
      • Low Gear:
        • 259Nm at 1,100 RPM (200 lbf-ft)
        • 800Nm at 390 RPM (619 lbf-ft)
    • Speed: Infinitely Variable 0-2000 RPM
    • Clamping by Spring Action, Opened Hydraulically
    • Exchangeable Rod Guide and Jaws for Standard Drill Rods and Casings
    • Number of Jaws: 8 
    • Gripping Range: 30-76mm (1.1875in-3in)
    • Gripping Range: Set of Jaws: 10mm (3/8in)
       
  • Rod Holder:
    • Clamping by Accumulator Action, Opened Hydraulically
    • Number of Jaws: 2
    • Gripping Range 30-106mm (1.1875in - 4.125in)
    • Gripping Range, Set of Jaws: 20mm (0.75in)
    • Max Opening, Without Jaws: 136mm (5.3125in)
      
      
  • Power Pack:
    • Hydraulic System: Water Cooled 
    • Max Working Pressure: 250 bar (3,625 PSI) 
    • Max Oil Flow 142-174 l/min (37-46 GPM) Depending on RPM of Prime Mover
    • Tank Volume: 80 Liters (21 US Gal)
      
      
  • Control Panel:
    • Central Control of All Drilling Operations Including Flush Pump, Wireline Hoist and Boom Tilt
    • Gauges for:
      • Hydraulic System Pressure
      • Feeding Force 
      • Water Pressure 
      • Water Flow
        

• Location: West USA

View More Diamond Core Drills