Wanted EquipmentSell Your Equipment Financing - Apply now
Equipment Quotes
2017 Sandvik LH204 Scooptram ID: 1424353
2017 Sandvik LH204 Scooptram
- Make: Sandvik
- Model: LH204
- Type: Narrow Vein Underground Loader / Scooptram
- Year: 2017
- Hours: 3,063.1 Hours
- Condition: Very Good Used Condition; Ready to Work
- New Paint, New Decals and a Fresh Service
- Bucket: 2yd³ Conventional Bucket
- Engine: Deutz BF4M2012C (93kW/125HP)
- Axles: Kessler D71
- Drive System: Hydrostatic
- Tires: 12.00R24 L5S
- Canopy/Cab: Full Enclosed Cab with Heat and A/C
- Equipped with a Remote-Control System
- General Model Specifications:
- Capacities:
- Tramming Capacity: 4,000 kg (8,820 lbs.)
- Break Out Force, Lift: 5,350 kg (11,800 lbs.)
- Break Out Force, Tilt: 7,250 kg (15,980 lbs.)
- Tipping Load: 10,350 kg (22,800 lbs.)
- Bucket Motion Times:
- Raising Time: 4.8 Sec
- Lowering Time: 3.4 Sec
- Dumping Time: 3.9 Sec
- Turning Radius:
- Turning Angle: ±42°
- Inner: 2,886mm (114")
- Outer: 5,153mm (203")
- Speeds Forward & Reverse (Level/Loaded):
- Stepless: 15 km/h (9.3 mph)
- Stepless: 15 km/h (9.3 mph)
- Capacities:
- Location: Western Canada
View More Scooptrams
Baldor 20HP Electric Motor ID: 1210620
Baldor 20HP Electric Motor
- Make: Baldor
- Model: CEM2334T
- Spec: 09C102X715G1
- Power Output: 20HP
- RPM: 1765 RPM
- Voltage: 230/460 Volts
- Amperage: 48/24 AMps
- Frequency: 60Hz
- Phase: 3-Phase
- Frame: 256TC TEFC
- Location: Western Canada
View More 20HP AC Motors
PTR Deep Chamber 72 in. Vertical Baler ID: 288207
- Model: 7200 HD
- DOM: 2007
- 72 x 42 x 48 Baler Size
- 7 in. x 48 in. Cylinder
- 20 HP Power Unit
- Location: Eastern USA
View more Waste Compactors and Sorters
Allen Bradley Size 2 Reversing Starter ID: 845263
- Starter: 709 Size 2 Reversing Starters
- Fusible
- 3 x 50 Amp Fuses
- O/L Block: BI Metal Style O/L Block
- O/L's: W 58 x 2
- Location: British Columbia, Canada
View more Combination Starters
TECO MAX-EI 20 hp Motor ID: 208731
- Type: AEHE.
- 20 HP.
- Volts: 230/460.
- Amps: 48.5/24.2.
- RPM: 1765.
- Frame: 256T.
- TEFC.
View more 20 HP Motors
Renolds 10:1 Right Angle Gear Reducer ID: 144167
- Renolds Right Angle Gear Reducer.
- Ratio: 10:1..
- Sheave: 16 in.
- Size: 4/0.
- Shipping information:
- Dimensions (L x W x H):
- 18 in. x 16 in. x 18 in.
- 46 cm x 41 cm x 46 cm.
- Dimensions (L x W x H):
Please contact us for more information.
Carrier 48 in. x 138 in. Vibrating Conveyor ID: 188228
- Model: FC48140S3/8304.
- Stroke: 5/32 In.
- Bed dims: 138 In. X 48 In. X 13 ½ In.
- Discharge diameter 11 In.
- Screen 1/4 In.
- 2 HP Motor
- Volts: 460.
- RPM: 893.
- Amps: .5
View more Vibrating Conveyors
ELine 20 HP Electric Motor ID: 988230
- Voltage: 575 Volt
- Horsepower: 20 HP
- RPM: 1775
- Frame: 256T
- 3 Phase
- Location: British Columbia, Canada
View more Electric Motors