Need this? Click here Have one? Click here
2011 Atlas Copco CS14 Diamond Core Drill
-
Make: Atlas Copco Epiroc
-
Model: CS14
-
Engine: Cummins QSB6.7 Diesel
-
Hours: 8500 Approx.
- Included In Package
- CS14 Drill
- Hydraulic Controls
- Heavy Duty Skid
- Enclosure with fold out work platforms
- Pump
- Hoist
- Wireline
-
Condition: Good, Used
-
Location: British Columbia, Canada
-
General Specifications:
- Depth capacity coring (wireline or conventional)
B wireline 1540 m (5052 ft)
N wireline 1200 m (4042 ft)
H wireline 800 m (2695 ft)
P wireline 475 m (1558 ft)
Depth are based on vertical hole - Main hoist
Single line capacity: Bare drum 80 kN (18,000 lb)
Line speed: Bare drum 44 m/min (148 ft/min)
Cable size: 35 m (118 ft) x 16 mm (10/16 in) - Wireline Capacity:
- 1830 m (6000 ft) of 4.76 mm (3/16 in)
- 975 m (3200 ft) of 6.35 mm (1/4 in)
- Line pull: bare drum: 11.9 kN (2665 lb)
full drum: 3.0 kN (668 lb) - Line speed: bare drum 114 m/min (374 ft/min)
full drum 453 m/min (1486 ft/min) - Mast and feed system
- Feed travel: 3.5 m (11.5 ft)
- Feed speeds: fast and slow with variable control
- Thrust: 59.6 kN (13,390 lb)
- Pull: 138 kN (31,020 lb)
- Drilling angle: 45 to 90 degrees
- Rod pull length: 6.09 m (20 ft)
- Power unit
- Manufacture: Cummins
- Model: QSB6,7 Tier III
- Volume: 6.7 liter 6 cylinder
- Power: 153 kW (208 HP)
- RPM: 1800
- Engine type: Diesel turbocharged/after cooled
- Cooling: Water
- Hydraulic system
- Primary pump: 28 MPa – 242 l/min (4061 psi – 63.9 gal/min)
- Secondary pump: 20 MPa – 122 l/min (2901 psi – 32.2 gal/min)
- Auxiliary pump: 21.5 MPa – 47 l/min (3118 psi – 12.4 gal/min)
- Hydraulic oil cooling: Air
- Drillhead and spindle speeds
- Power: hydraulic motor – variable speed/reversible
- Final drive: 4 in chain driven in oil bath – 2,5 ratio
- Spindle (inner diameter): 117 mm (4 5/8 in)
- Spindle speeds:
Ratio Speed, RPM Torque, Nm (ftlb)
1st 6.63:1 117-196 5113-3051 (3771-2250)
2nd 3.17:1 245-410 2445-1459 (1803-1076)
3rd 1.72:1 451-756 1326-792 (978-584)
4th 1.00:1 776-1300 771-460 (569-340)
Range selection: manual control from operator’s station
Hinged head: swing away
- Depth capacity coring (wireline or conventional)
-
Chuck assembly
- Type: hydraulic open, spring closed
- Maximum inside diameter: 117 mm (4 5/8 in)
- Holding capacity: 18,143 kg (40,000 lb)
- Type: hydraulic open, spring closed
- Rod Holder
- Type: hydraulic open, gas spring closed
- Maximum inside diameter: 210 mm (8.3 in)
- Holding capacity: 13,000 kg (28,660 lb)
- Weight
CS14 incl. Trido140 and Rod Holder: 7,000 kg (15,430 lb) - Dimensions (L – W – H)
- In transport position (top mast removed):
6370 mm (21,45ft) 2200 mm (7,22ft) 2340 mm (7,88ft) - Transport on drill site (top mast folded):
6370 mm (21,45ft) 2550 mm (8,59ft) 2340 mm (7,88ft)
- In transport position (top mast removed):
View More Diamond Core Drills
Sold
Image 1 of 13