150 YPH Trommel Wash Plant ID: 695057

Complete with:

• Rotary Trommel with Grizzly & Belt Feeder
  • Drum: 7 ft. Dia. x 28 ft. Long with 
    • Full Length Spray Wash Bar Inside Drum 
  • Drum Comes with 
    • 2 in. Dia. Torch Cut Holes for 20 in. Long Section of Drum 
    • 7 ft. Long Sections pf 1 in. x 6 in. Long Torch Cut Slots in the Drum 
  • Trommel Drum Drive Consists of 
    • Electric Motor Driving a Gearbox Chain Driving Axles with Tires Rotating the Drum 
    • Motor is Driving a Hydraulic Pump that Drives the Grizzly Feeder
  • Belt Feeder Comes with 
    • Inverted Rail Grizzly with 10 in. Spacing 
  • 30 in. Wide x 11 ft. Long Flat Belt Conveyor Discharging into the Rotary Trommel 
    • Conveyor Comes with Adjustable Hydraulic Drive Powered from the Trommel Motor 
  • Feeder is 9 ft. Wide x 12 ft. Long x 4 ft. Deep 
  • 2 Hydraulic Leveling Jacks on the Sides of the Feeder 
  • Includes Some Electrical Pieces 
    • 1 - 20 Amp Full Voltage Starter 
    • 1 - 30 Amp Full Voltage Starter 
    • 3 - 30 Amp Fuseable Disconnect 
  • Overall Dimensions: 11 ft. Wide x 43 ft. Long x 12 ft. 3 in. High 
  • Weight: 35,000 lbs. 
• Included in Plant 
  • 1 - Pulsating Sluice 
    • 5 ft. Wide x 179 in. Long x 51 in. High 
    • Powered by 
      • Baldor 1 HP Motor 
      • 208-230/460 Volt 
      • 1140 RPM 
      • Through Radicon R/A Reducer to Another Reducer Chain Driving the Sluice 
    • Comes with Wash Bars
  • 1 - Pulsating Sluice 
    • 22 in. Wide x 10 ft. Long x 20 in. High 
    • Powered by 
      • Baldor 2 HP Motor 
      • 208-230/460 Volt 
      • 1750 RPM 
      • Direct Driving Radicon R/A Reducer Chain Driving the Sluice 
  • 1 - 30 in. Wide x 49 ft. 6 in. Long Truss Frame Conveyor 
    • Head Pulley: 10 in. Dia. x 32 in. Face, Rubber Lagged 
    • Tail Pulley: 16 in. Dia. x 32 in. Face, Winged 
    • Belting: 2-Ply, 1/2 in. Thick 
    • Frame: 5 in. x 3 in. Hass & 4 in. x 3 in. HSS - 28 in. High 
    • 6 in. Dia. Cans, 35° Troughing Idlers 
    • 2 - 6 in. Dia. Rubber Return Idlers 
    • 10 HP US Electrical Motor 
      • 230/460 Volt 
      • 1750 RPM 
  • 1 - Spare Dryer Drum 
    • 7 ft. Dia. 
    • 35 ft. Long 
    • 7/8 in. Thick 
    • 8 in. Flange on Each End
    • Bare Unit 
  • 1 - CAT Generator 
    • D 330 Series Diesel Engine 
    • 75 kW, 93.8 kVA Kato Gen End 
      • 3 PH, 208-240/416-480 Volt 
      • 1 PH, 50 kW, 62.5 kVA, 120/240 Volt 
      • 200 Amp Main Switch 
      • 3 - Starters, 220 Volt Plugs Ins
  • 1 - 8 ft. Wide x 16 ft. Long Sluice 
    • Discharge End Tapers to 5 ft. Wide with 
      • Expanded Mesh Sections & Riffle Section
• Location: British Columbia, Canada

View more Trommels